Aprisa SR+ Datasheet FCC IC English

4RF Aprisa SR+ Smart, secure, industry-leading speed licensed point-to-multipoint SCADA communications for industrial monitoring and control for the electricity, water, oil and gas industries

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. SMART, SECURE POINT-TO-MULTIPOINT RADIO 220 MHz, UHF and 900 MHz licensed bands Datasheet FCC and IC licensed bands Smart, secure, industry-leading speed licensed point-to-multipoint SCADA communications for industrial monitoring and control for the electricity, water, oil and gas industries • High capacity: to meet the growing number of data-intensive applications in the SCADA environment, the Aprisa SR+ provides data rates of up to 216 kbit/s in 50 kHz licensed channels. • Secure: with its defense in depth approach, including AES encryption, authentication, address filtering and user access control, the Aprisa SR+ protects against vulnerabilities and malicious attacks. • Future-proof: the Aprisa SR+ supports multiple serial and Ethernet interfaces in a single, compact form factor, and is standards-based for long term incorporation into SCADA networks while protecting the legacy investment in serial devices. • Advanced L2/L3 capabilities: selectable L2 Bridge or L3 Router modes, with VLAN, QoS and filtering attributes to support narrow bandwidth channels and mission critical traffic while meeting increasing security and IP network policy requirements. • Adaptable: the Aprisa SR+ integrates into a range of network topologies, with each unit configurable as a base station, repeater or remote station; connect multiple RTUs / PLCs to a single radio. • Flexible interfaces: the data interfaces can be configured for serial or Ethernet operation; a range of options are supported, including two serial and two Ethernet, one serial and three Ethernet, or four Ethernet ports. • Link efficiency: Adaptive Coding Modulation (ACM) and forward error correction maintains the integrity of the wireless connection while an effective channel access scheme and IP routing ensures efficient transfer of data across the Aprisa SR+ network. • Reliable and robust: the Aprisa SR+ requires no manual component tuning and maintains its high power output and performance over a wide temperature range. • Easily managed: an easy to use GUI supports local element management via HTTPS and remote element management over the air, and SNMP support allows network-wide monitoring and control via a third party network management system. The Aprisa SR+ in brief • 220 MHz, UHF and 900 MHz licensed bands • RS-232 and IEEE 802.3 protocols with multiple port options • Software selectable 12.5 kHz, 25 kHz and 50 kHz channel sizes • Full and half duplex operation • Single or dual frequency • Gross data rates greater than 200 kbit/s • 256, 192 or 128 bit AES encryption • Adaptive coding modulation: QPSK to 64 QAM • Advanced forward error correction • Software selectable dual / single antenna port operation • Transparent to all common SCADA protocols • Dedicated alarm port • Protected station option • Power optimized option • –40 to +70 °C operational temperature • 210 mm (W) x 130 mm (D) x 41.5 mm (H) • FCC and IC standards compliant • Seamlessly integrates with Aprisa XE point-to-point radio Aprisa SR+ applications Applications throughout the electricity grid and renewable energy: • Smart grid: concentrator communications and GPRS replacement • AMI / AMR: high density data concentrator backhaul • Renewables: wind farm, tidal, hydro automation • Measurement, control and protection in MV / HV distribution / transmission • Co-generation and community energy storage monitoring and control in distributed storage and generation • Fibre substitution in substation and feeder automation upgrades

2. For more information please contact EMAIL sales@4rf.com URL www.4rf.com Datasheet ABOUT 4RF Operating in more than 130 countries, 4RF provides radio communications equipment for critical infrastructure applications. Customers include utilities, oil and gas companies, transport companies, telecommunications operators, international aid organisations, public safety, military and security organisations. 4RF point-to-point and point-to-multipoint products are optimized for performance in harsh climates and difficult terrain, supporting IP, legacy analogue, serial data and PDH applications. Copyright © 2015 4RF Limited. All rights reserved. This document is protected by copyright belonging to 4RF Limited and may not be reproduced or republished in whole or part in any form without the prior written consent of 4RF Limited. While every precaution has been taken in the preparation of this literature, 4RF Limited assumes no liability for errors or omissions, or from any damages resulting from the use of this information. The contents and product specifications within it are subject to revision due to ongoing product improvements and may change without notice. Aprisa and the 4RF logo are trademarks of 4RF Limited. Version 1.6.0 GENERAL NETWORK TOPOLOGY Point-to-multipoint (PMP), Repeater NETWORK INTEGRATION Serial and Ethernet (router or bridge mode) PROTOCOLS ETHERNET IEEE 802.3, 802.1d/q/p SERIAL Legacy RS-232 transport WIRELESS Proprietary SCADA Transparent to all common SCADA protocols such as Modbus, IEC 60870-5-101/104, DNP3 or similar RADIO FREQ BAND TUNING RANGE TUNE STEP FREQUENCY RANGE 220 MHz 215 – 240 MHz 3.125 kHz 220 MHz 215 – 240 MHz 2.5 kHz 400 MHz 400 – 470 MHz 6.25 kHz (Note 7) 450 MHz 450 – 520 MHz 6.25 kHz 896 MHz 896 – 902 MHz 6.25 kHz 928 MHz 928 – 960 MHz 6.25 kHz CHANNEL SIZE 12.5 kHz, 25 kHz and 50 kHz software selectable DUPLEX Single frequency half-duplex Dual frequency half-duplex Dual frequency full-duplex (Note 4) FREQUENCY STABILITY ± 1.0 ppm FREQUENCY AGING < 1 ppm / annum TRANSMITTER AVERAGE POWER OUTPUT (Note 1) 64 QAM 0.01 – 2.5 W (+10 to +34 dBm, in 1 dB steps) 16 QAM 0.01 – 3.2 W (+10 to +35 dBm, in 1 dB steps) QPSK 0.01 – 5.0 W (+10 to +37 dBm, in 1 dB steps) (Note 3) 4-CPFSK 0.01 – 10.0 W (+10 to +40 dBm, in 1 dB steps) ADJACENT CHANNEL POWER < –60 dBc TRANSIENT ADJACENT CHANNEL POWER < –60 dBc SPURIOUS EMISSIONS < –37 dBm ATTACK TIME < 1.5 ms RELEASE TIME < 0.5 ms DATA TURNAROUND TIME < 2 ms RECEIVER 12.5 kHz 25 kHz 50 kHz SENSITIVITY (BER < 10 -6 ) max coded 64 QAM –103 dBm –99 dBm –96 dBm max coded 16 QAM –110 dBm –107 dBm –104 dBm max coded QPSK –115 dBm –112 dBm –109 dBm min coded 4-CPFSK –113 dBm –110 dBm –107 dBm ADJACENT CHANNEL SELECTIVITY > –47 dBm > –37 dBm > –37 dBm (Note 2) [> 48 dB] [> 58 dB] [> 58 dB] CO-CHANNEL REJECTION max coded QPSK > –10 dB CO-CHANNEL REJECTION max coded 64 QAM > –20 dB INTERMODULATION RESPONSE REJECTION > –35 dBm [> 60 dB Note 2 ] BLOCKING OR DESENSITISATION > –17 dBm [> 78 dB Note 2 ] SPURIOUS RESPONSE REJECTION > –32 dBm [> 63 dB Note 2 ] MODEM 135 / 400 / 450 MHz Bands 220 / 896 / 928 MHz Bands 12.5 kHz 25 kHz 12.5 kHz (6) 25 kHz 50 kHz GROSS DATA RATE 64 QAM 54 kbit/s 96 kbit/s 60 kbit/s 96 kbit/s 216 kbit/s 16 QAM 36 kbit/s 64 kbit/s 40 kbit/s 64 kbit/s 144 kbit/s QPSK 18 kbit/s 32 kbit/s 20 kbit/s 32 kbit/s 72 kbit/s 4-CPFSK 9.6 kbit/s 19.2 kbit/s 9.6 kbit/s 19.2 kbit/s 38.4 kbit/s OCCUPIED BANDWIDTH 10.7 kHz 19.8 kHz 11.8 kHz 19.8 kHz 43.0 kHz FORWARD ERROR CORRECTION Variable Reed Solomon plus convolutional code ADAPTIVE BURST SUPPORT Adaptive FEC with Adaptive Coding Modulation SYSTEM SPECIFICATION FCC and IC licensed bands SECURITY DATA ENCRYPTION 256, 192 or 128 bit AES DATA AUTHENTICATION CCM INTERFACES ETHERNET 2, 3 or 4 port RJ45 10/100Base-T switch (specified at order) SERIAL 2, 1 or 0 port RJ45 RS-232 (specified at order) Additional RS-232 / RS-485 port via USB converter (optional) MANAGEMENT 1 x USB micro type B (device port) 1 x USB standard type A (host port) 1 x Alarm port RJ45 ANTENNA 2 x TNC 50 ohm female Software selectable single or dual port operation LED s Status: OK, MODE, AUX, TX, RX Diagnostics: RSSI, traffic port status TEST BUTTON Toggles LEDs between diagnostics / status PRODUCT OPTIONS DATA PORT CONFIGURATION 2 x Ethernet ports + 2 serial ports 3 x Ethernet ports + 1 serial port 4 x Ethernet ports POWER OPTIMIZED Providing optimized power and sleep mode PROTECTED STATION Providing hot-swappable / hot-standby redundant hardware switching POWER INPUT VOLTAGE 10 – 30 VDC (13.8 V nominal) RECEIVE STANDARD < 7 W POWER OPTIMIZED < 3 W in active receive state < 2 W in idle receive state, < 0.5 W in sleep mode TRANSMIT < 35 W MECHANICAL DIMENSIONS 210 mm (W) x 130 mm (D) x 41.5 mm (H) 8.27” (W) x 5.12” (D) x 1.63” (H) WEIGHT 1.25 kg (2.81 lbs) MOUNTING Wall, Rack or DIN rail ENVIRONMENTAL OPERATING TEMPERATURE –40 to +70 ̊C (–40 to +158 ̊F) HUMIDITY Maximum 95 % non-condensing MANAGEMENT & DIAGNOSTICS LOCAL ELEMENT Web server with full control / diagnostics Partial diagnostics via LEDs and test button Software upgrade from PC or USB flash drive REMOTE ELEMENT Over-the-air remote element management with control / diagnostics Network software upgrade over-the-air NETWORK SNMPv2 and SNMPv3 security support for integration with external network management systems COMPLIANCE RF FCC CFR47 Part 24 / 90 / 101, IC RSS 119 / RSS 134 FCC IDs UIPSQ400M131, UIPSQ450M140 IC ID 6772A-SQ400M131 EMC FCC CFR47 Part 15, EN 301 489 Parts 1 & 4, ICES-003 IEEE 1613 (Note 5) SAFETY EN 60950 Class 1 div 2 for hazardous locations ENVIRONMENTAL ETS 300 019 Class 3.4 Ingress Protection code IP51 Notes: 1. The Peak Envelope Power (PEP) at maximum set power level is +41 dBm. 2. The receiver figures are shown in typical fixed interference dBm values and dB values [in brackets] relative to the sensitivity. Relative values are given for QPSK modulation and max coded FEC. Refer to the Aprisa SR+ User Manual for a complete list of modulation and coding levels. 3. Please consult 4RF for availability. 4. Full duplex channel access for point to multi-point available in a future software release. 5. The Aprisa SR+ has been successfully evaluated against the requirements of IEEE 1613 for class 1 performance criteria. 6. The gross data rate for the 12.5 kHz channel size in the 896 / 928 MHz bands varies with regulatory compliance. 7. The 450 MHz band is only available for FCC.

Views

  • 860 Total Views
  • 639 Website Views
  • 221 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+