CradlePoint IBR650 Manual

CradlePoint IBR650 Manual

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this presentation by email!

Embed in your website

Select page to start with

1.

3. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 ` Trademarks Cradlepoint and the Cradlepoint logo are registered trademark s of Cradlepoint , Inc. in the Unit ed States and other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2013 - 2015 by Cradlepoint , Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed writt en consent by Cradlepoint , Inc.

10. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 7 2 HARDWARE OVERVIEW

18. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 15 2.2.1 Attaching the COR to the Mounting B racket 1) Attach the bracket to the wall or other surface with screws. NOTE: S crews are not provided because the type of screw required depends on the mounting surface. 2 ) Place the router’s edge against the bottom of the bracket . 3) Press the router down firmly, then push it inside the bracket . It sh ould latch.

11. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 8 2.1 Ports , LEDs, and Switches

13. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 10

14. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 11

17. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 14 2.2 Mounting Bracket

19. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 16 2.2.2 Removing the COR from the Mounting B racket From the top of the bracket, press d own firmly on the router using your thumb(s) and pull the device out.

65. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 62 5.11 WiPipe QoS View the breakdown of packets and bytes sent and received associated with each WiPipe QoS rule.

140. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 137 Example Configuration:

26. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 23 4.1 Administrator Login To access the administration p ages, open a Web browser and type the hostname “ cp/ ” or IP address “ http://192.168.0.1 ” into the address bar. The Administrator Login page will appear. Log in using your administrator password. Initially, this password can be found on the bottom of the IBR600 /IBR650 unit as the Default Password . This password is also the last eight digits of the unit’s MAC address.

61. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 58 Data Usage: A measure of the amount of information that is currently being sent or received through the network. Sample rate and size can be adjusted from the dropdown boxes.

60. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 57 5.8 Statistics The Statistics sub menu option displays basic traffic statistics. Wireless Statistics: View the signal strength and other wireless modem information. The wireless device’s signal strength will only be displayed as long as it supports “Live Diagnostics.” S ample rate and size can be adjusted from the dropdown boxes.

32. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 29 9) Review the details and record your wireless network name, administrative password, and WPA password (or WEP key). Move your mouse over your WiFi password to reveal it. Please record these settings for future access. You may need this information to configure other wireless devices. NOTE: If you are currently using this network, reconnect your devices to the network using the new wireless network name and security password. Click APPLY to save the settings and update them to your router.

62. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 59 Failover/Failback/Load Balance: An easy way to view current connective states of the devices plugged into the router as compared to the past. Sample rate and size can be adjusted from the dropdown boxes.

151. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 148 Process Timeout: If the process fails an error message will display. Activation has a 3 - minute timeout, PRL update has a 4 - minute timeout, and FUMO has a 10 - minute timeout. 7.1.12 Configuration Rules (Advanced) This section allows you to create general rules that apply to the Internet connections of a particular type. These can be general or very specific. For example, you could create a rule that applies to all WiMAX modems, or a rule that only applies to an Internet source with a particular MAC address. The Configuration Rules list shows all rules that you have created, as well as all of the default rules. These are listed in the order they will be applied. The most general rules are listed at the top, and the most specific rules are at the bottom. The router goes down the list and applies all rules that fit for attached Internet sources. Configuration settings farther down the list will override previous settings. Select any of these rules and click “Edit” to change the settings for a rule. To create a new rule, click “Add.”

123. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 120 6.9.2 Rules A traffic shaping r ule identifies a specific message flow and assigns that flow to one of the queues created above. Click Add to create a new Traffic Shaping rule.

215. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 212 8.5 Feature Licenses Some Cradlepoint fea tures may require a license. These features are disabled by default. To obtain a feature license, contact your Cradlepoint sales representative. Once you have obtained the feature license file, upload the file to enable the feature. A reboot is require d after uploading a feature license file.

106. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 103 Schedule : Set up a schedule for this network interface. This allows an interface to be enabled or disabled during specific hours of a day. For example, use this to limit a Hotspot network to business hours. Schedule Service : (Default: Disabled.) Select to enable. This will open a configurable chart for setting the schedule. Each hour of the week is represented by a black or gray square. Black represents disabled, while gray represents enabled. Hover over a square to reveal t he hour it represents. Click on the squares to toggle between black and gray. In the example show n, the network is enabled from 8 - 5 on Monday through Friday, but disabled at all other times.

108. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 105 STP : Spanning Tree Protocol (STP) allows a network design to include redundant paths while preventing broadcast radiation from bridge loops. Enable STP: Enable Spanning Tree Protocol loop detection. Bridge Priority: Set the priority of the bridge. When determining the root bridge of the spanning tree topology, the bridge priority is compared first. The bridge with the lowest priority value will win. If you want this router to be the root bridge, then set it to a value less than the default of 32768. A valid priority value is between 0 and 65535.

187. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 184 Data Usage rule for each interface, rather than distributing sessions based solely on bandwidth. For proper function you need to create data usage rules for each WAN device you will be load balancing. Make certain to select the "Use with Load Balancing" checkbox in the Data Usage rule editor.

34. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 31 WiFi Clients Click to view a signal strength indica tor for your network, “WiFi Connection Strength”. The number listed in the orange block shows the number of attached clients. Click th is to go to the Client List page ( Status → Client List ). Logout Click to log out of the administration pages.

166. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 163 7.7 VPN Tunnels VPN (virtual private network) tunnels are used to establish a secure connection to a remote network over a public network. For example, VPN tunnels can be used across the Internet by an individual to connect to an office network w hile traveling or by tw o office networks to function as one network . The two networks set up a secure connection across the (normally ) unsecure Internet by assigning VPN encryption protocols. The IBR600 /IBR650 uses IPsec ( Internet Proto col s ecurity) to authenticate and encrypt packets exchanged across the tunnel. To set up a VPN tunnel with the IBR600/IBR650 on one end, there must be another device (usually a router) that also supports IPsec on the other end. IKE ( Internet Key Exchange) is the security protocol in IPsec. IKE has two phases, Phase 1 and Phase 2. The IBR600/IBR650 has several different security protocol options for each phase, but the default selections will be sufficient for most users. The VPN tunnel statu s page allows you to view the state of the VPN tunnels. If a tunnel fails to connect to the remote site, check the System Logs for more information. You may double click on a cell to directly edit that information. Click Add to configure a new VPN tunnel.

198. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 195 RMC $GPRMC – Recommended minimum specific GPS/transit data Example : $GPRMC,225446,A,4916.45,N,12311.12,W ,000.5,054.7,191194,020.3,E*68 225446 Time of fix 22:54:46 UTC A Navigation receiver warnin g A = OK, V = warning 4916.45,N Latitude 4 9 deg. 16.45 min North 12311.12,W Longitude 123 deg. 11.12 min West 000.5 Spe ed over ground, k nots 054.7 Course made good, t rue 191194 Date of fix – 19 November 1994 020.3,E Magnetic variation : 20.3 deg rees East *68 C hecksum is mandatory for RMC VTG $GPVTG – Vector track and speed over ground $GPVTG,054.7,T,034.4,M,005.5,N,010.2,K 054.7,T Track, degrees relative to true north 034.4,M Track, degrees relative to magnetic north 005.5,N Ground speed, knots 010.2,K Ground speed, kilometers per hour

244. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 241 http://www. Cradlepoint .com/ Copyright © 2013 by Cradlepoint , Inc. All rights reserved.

84. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 81 Remote Administration Access Control Editor IP Address : The IP address that will be allowed to access administrative services through the WAN . Netmask (Optional): The n etmask allows you to specify what IP address sets will be allowed access. If this field is left empty a netmask of 255.255.25 5.255 will be used , which means that only the single specified IP address would have remote administration access .

184. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 181 DSCP (DiffServ): Differentiated Services Code Point is the successor to TOS (Type of Service). Use this field to select traffic based on the DSCP header in each IP packet. This field is sometimes set by latency sensitive equipment such as VoIP phones. If you know specific DSCP values, yo u can input one h ere. DSCP Negate: When checked this rule will match on any packet that does NOT match the DSCP field. Protocol: Select from the dropdown list to specify the protocol for a particular data use. Otherwise, leave “Any” selected.

41. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 38 • - 26 dBm : A relative meas ure of wireless signal quality (decibels relative to one milliwatt). This express es theoretical best quality. The value is given as a negative exponent: - 20 is a very g ood value while - 8 0 is relatively poor. Signal quality can be reduced by distance, by interference from other radio - frequency sources (such as cordless telephones or neighboring wireless networks), and by obstac les between the router and the wireless device. Time Online: The amount of time the device has been connected to the router. Kick: Click on this button to disconnect a client.

46. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 43 5.3 GPS If GPS support is enabled and a modem capable of providing GPS coordinates is connected, this page will show a graphical view of your router's location. See the GPS sec tion in System Settings → Administration to enable GPS support. GPS information is only displayed if 1) the modem supports GPS, 2) your carrier allows the GPS functionality, and 3) the modem has sufficient GPS signal strength. If no information is displayed, check that both the modem and your carrier support GPS. If GPS is supported , make sure the modem is in an area where it can receive a signal from the GPS satellites.

72. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 69 6.1.5 Umbrella by Ope nDNS Umbrella by OpenDNS is a cloud - based web filtering and security solution that protect s you online by filtering websites . Go to http://www.opendns.com/business - security/ for information about Umbrella. Enter your Umbrella account information in order to use these content f iltering settings. Force All DNS Requests To Router : Enabling this will redirect all DNS requests from LAN clients to the router's DNS server. This will allow the router even more control over IP Addresses even when the client might have their own DNS servers statically set. OpenDNS ISP Filter Bypass Algorithm: It is possible that your Internet Service Provider (ISP) uses the port that OpenDNS is configur ed to access , port 53 , which will prevent OpenDNS filtering. If OpenDNS does not appear to be working correctly, enabling this w ill attempt to bypass those ports when using an OpenDNS content filtering level.

85. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 82 6.5 MAC Filter / Logging A MAC (Media Access Control) address is a unique identifier for a computer or other device. This page allows you to ma nage clients by MAC address. You can filter clients by MAC addresses and/or keep a log of devices connected to your router. 6.5.1 Filter Configuration The MAC Filter allows you to create a list of devices that have either exclusive access (whitelist) or no acce ss (blacklist) to your wireless LAN. Enabled: Click to allow MAC Filter options. Whitelist: Select either “Whitelist” or “Blacklist” from a dropdown menu. In "Whitelist" mode, the router will restrict WiFi access to all computers except those contained in the "MAC Filter List" panel. In “Blacklist” mode, listed devices are completely blocked from WiFi access. MAC Filter List (Whitelist or Blacklist) : Add devices to either your whitelist or blacklist simply by inputting each device’s MAC address. NOTE: Use caution when using the MAC Filter to avoid accidentally blocking yourself from accessing the router.

182. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 179 7.8.4 Wireless Scan Settings Scan Interval: How often WiFi as WAN scans the environment for updates. (Default: 60 seconds. Range: 5 - 3600 seconds.) Scan While Conn ected: Continue to scan for WiFi as WAN profile updates when connected. Each time a scan occurs the wireless communication of the router will be temporarily interrupted. Normally this should be disabled.

192. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 189 8.1.2 System Clock Enabling NTP will tell the router to get its system time from a remote server on the Internet. If you do not enable NTP then the router time will be based on when the router firmware was built, which is guaranteed to be wrong. Whenever the Internet connection is re - established and once a week thereafter the router will ask the server for the current time so it can corr ect itself. You then have the option of selecting an NTP server and adjusting the NTP server port. Select the NTP server from the dropdown list. Any of the given NTP servers will be sufficient unless, for example, you need to synchronize your router’s time with other devices in a network. Time Zone: Select from a dropdown list. Setting your Time Zone is required to properly show time in your router log. Daylight Savings Time: Select this checkbox if your location observes daylight savings time.

67. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 64 6.1 Content Filtering Yo u have two main options for filtering content in a network created by your router. 1) Web Filter Rules: Create a list of websites that will be either disallowed or allowed. Customize the filter settings for each network and/or each MAC address. (These rules wi ll not block HTTPS websites.) 2) OpenDNS Content Filtering : Allows several options for filtering rules using OpenDNS, a third party service. 6.1.1 Network Web Filter Rules Network Web Filter Rules allow you to control access from your network to external domains or websites. Rules are assigned to a specific LAN network (or all networks). The highest priority rule will have precedence when there is a conflict. Addresses can be added by URL/Domain na me or by IP address. Exceptions to existing rules can be created by adding another rule with higher priority. For example, if access to espn.go.com is desired but go.com is blocked with a priority of 50, the addition of an “Allow” rule for espn.go.com with a priority of 51 or greater will allow access. When creating rules keep in mind that some sites use multiple domains, so each domain may need a rule added to produce the desired behavior. NOTE : Websites that use HTTPS will not be blocked by these rules. You will need to use OpenDNS to block HTTPS websites.

176. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 173 7.7.7 Global VPN Settings These settings apply to all configured VPN tunnels. Enable Certificate Support : Enabling Certificate Support will allow you to load a certificate for VPN to the router. Click the “Upload Certificate” button that appears to browse for a certificate on a local device. Disabling certificate support will no longer use any previously loaded certificate but will not delete it from the router. Only one certificate at a time is supported. IKE / ISAKMP Port: Internet Key Exchange / Internet Security Association and Key Management Protocol port. Default: 500. This is a standard VPN port that usually does not need to be changed. IKE / ISAKMP NAT - T Port: Internet Key Exchange / Internet Security Association and Key Management Protocol network address translation tra versal port. Default: 4500. This is a standard VPN NAT - T port that usually does not need to be changed.

200. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 197 Enable SMS support SMS support is enabled by default on the router. Deselect this to disable. Password By default, the passwo rd is the last eight characters of the router’s MAC address (i.e., the Default Password on the product label). You can chan ge this password to anything between 1 and 16 characters. It should be long enough to be useful for security but short enough to easi ly t ype int o your phone (or other texting client) . White List This list is blank by default, which means that the router will accept SMS messages from any phone number. Leaving this blank is unsecure, so Cradlepoint recommends that you add phone numbers to this list. Once any numbers are listed, only those numbers have the ability to connect to the router via SMS. NOTE: You cannot add email address es to the White list. When a phone number is added to the White List , email SMS messages will be rejected.

95. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 92 6.8 WiFi / Local Network s This section is used to configure the settings for networks created by your router. Note that changes made in this section may also need to be duplicated on wireless devices that you want to connect to your wireless network. For example, if you change a L AN ’s IP address, devices within that network will lose connection. They will have to reconnect to the network. The user can set up multiple networks on the IBR600 /IBR650 , each with its own unique configuration and its own selection of interfaces. Each loca l network can be attached to any of the following types of interfaces: • WiFi (IBR600 only) • Ethernet • VLAN For example, one network might be just an isolated WiFi hotspot for guests, while another might be the main network with administrative access, an Ethernet port , a password - protected WiFi SSID, and a VLAN interface.

105. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 102 Multicast Proxy : IGMP ( Internet Group Management Protocol ) m ulticast proxy allows a single packet to reroute to multiple destinations (see the Wik ipedia explanation of m ulticast ). This may be used for IPTV , for example. Multicast Proxy: Select to e nable IGMP proxy support to allow multicast s treams to flow across this network. By default , enabling multicast proxy enables a multicast connection with devices within the LAN. In rare cases, additional IP address ranges need access to the multicast streams. Click Add and input the IP Address and Netmask for an additional IP address range.

20. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 17 3 QUICK START 3.1 Basic Setup 1. Attach the WiFi (right ) and modem a ntennas . 2. Plug the power s upply into an electrical outlet and c onnect it to the router . 3. Make sure the power is switched on. O = OFF I = ON 3.1.1 Activate Your Modem A wireless broadband data plan must be added to your IBR600 /IBR650 . Wireless broadband data plans are a vailable from wireless carriers such as AT&T, Sprint , Verizon , and Vodafone . A new line of service can be added or a data plan can be transferred from an existing account. You will need the ESN /IMEI (or similar number) from your product label on your router to add or transfer a line of service. After adding a data plan to the modem, the modem may need to be activated. To activate the modem : 1. L og in to the router’s administration pages (see Accessing the Administration Pages ). 2. S elect Internet from the top navigation bar and Modem Settings from the drop down menu ( Internet → Modem Settings ). 3. F ind and s elect the Cradlepoint modem . 4. C lick Update/Activate. Cl ick Activate in the popup.

70. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 67 6.1.3 MAC Address Web Filter Rules MAC Address Web Filter Rules allow you to control access from a specific MAC address to external domains or websites. The settings for the MAC Address Web Filter Rules section match those for the Network Web Filter Rules , except that you must assign a MAC address instead of a network to each rule. See the Network WebFilter Rules section for more configuration details.

146. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 143 AT Config Script: Enter the AT commands to be used for carrier specific modem configuration settings. Each command must be entered on a separate line. The command and associated response will be logged, so you should check the system log to make sure there were no errors. NOTE: AT Config Script should not be used unless told to do so by your modem's cellular provider or by a support technician. AT Dial Script: This is included for legacy devices only . Most users will not use this option. Go to SIM/APN /Auth Settings instead if you need to select a specific Access Point Name. If you do need this option for older devices, e nter the AT commands to be used in establishing a network connection. Each com mand must be entered on a separate line. All command responses must include “OK” except the final command response, which must include “CONNECT”. Example: AT ATDT*99***2#

21. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 18 3.2 Connect to a Computer or other Device For the IBR650, simply connect your device(s) to the router via Ethernet. 3.2.1 Wireless Network Connection (IBR600) 1) Find the network. On a Wi Fi - enabled computer or device, open the window or dropdown menu that allows you to access wireless networks. The IBR600 ne twork will appear on the list: s elect this network. 2) Log i n. You will need to input the Default P assword when prompted. The Default P assword is provided on the product label found on the bottom of your router (this password is the last eight digits of the router’s MAC address, which can be found on the product box or on the product label). NOTE : If more than one IBR600 wireless router is visible, you can find the correct unit by checking for its SSID (service set identifier; the unique name of the local network) . The default SSID of the primary network has the form IBR600 - xxx, where “xxx” is the last 3 digits of the router’s MAC address.

54. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 51 Statistics • Incoming Bytes • Outgoing Bytes • Connection Uptime (secs)

102. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 99 IPv4 DHCP : Changing settings for the IPv4 DHCP server is optional. The d efault selections are almost always sufficient. DHCP Server : (Default: Enabled) When the DHCP s erver is enabled, users of your network will be able t o automatically connect to the Internet without any special configuration. It is recommended that you leave this enabled. Disabling the DHCP s erver is only recomm ended if you have another DHCP s erver on your network and it is configured properly. Range Star t and Range End : These designate the range of values in the reserved pool of IP addresses for the DHCP server. Values within this range will be given to any DHCP enabled computers on your network. The default values are almost always sufficient (default: 7 2 to 200, as in 192.168.0.72 to 192.168.0.200). Example: The router uses an IP address of 192.168.0.1 for its primary network by default . A computer designated as a Web server has a static IP address of 192.168.0.3. Another computer is designated as an FT P server with a static IP address of 192.168.0.4. The starting IP address for the DHCP server needs to be 192.168.0.5 or higher . Lease Time: [Default: 720 minutes (12 hours)] S pecifies how long DHCP - enabled computers will wait before requesting a new DHCP lease. Smaller values are better suited to busy environments.

8. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 5 The Cradlepoint COR is a highly featured, compact , and robust router designed for deployment in critical business and enterprise applications that require 24x7 connectivity via Ethernet and/or WiFi. The router features a built - in high - speed modem (4G LTE, 3G EV DO , WiMAX, HSPA+, LTE/HSPA+) modem as well as support for wired networks such as DSL or Cable. With its compact size , sleek metal case and mounting bracket, and external Cellul ar antennas, Cradlepoint COR is ideal for use in high - availability portabl e or fixed applications (ATM, kiosk, surveillance, vehicle). With failover/failback capabil ity, COR supports both wired and wireless Internet . The router increases Internet avail ability and business continuity by detecting network failures and seamlessly switching over to the other network(s). It is also ideal for deployment as a primary connection solution where wired Internet is not available. The IBR60 0 /IBR650 provides secure and reliable VPN functionality, allowing users to create, manage and terminate up to five concurrent IPSec VPN sessions. It allows for secure access to company networks for enterprise applications and provides a secure way to transmit sensitive data to and from a remote site. 1.3.1 Active GPS Support on - PWD Models The following - PWD models include an active GPS connection at 3.3 V and 100 mA max : • COR IBR600LE - PWD ( Verizon ) • COR IBR600LP - AT - PWD (AT&T) • COR IBR600LP 2 - EU - PWD (Europe) 1 • COR IBR600LP - PWD 2 (Canada) 1 1 Requires minimum order quantity (MOQ) To enable, purchase and connect an active GPS antenna (SMA adapter included). The - PWD models include only one WiFi antenna for operation in 1x1 WiFi mode. 1.3.2 Cradlepoint Enterprise Cloud Manager Rapidly deploy and dynamically manage networks at geographicall y distributed stores and branch locations with Enterprise Cloud Manager, Cradlepoint ’s next generation management and application platform. Enterprise Cloud Manager integrates cloud management with your Cradlepoint devices to improve productivity, increase reliability, reduce costs, and enhance the intelligence of your network and business operations. Learn more at http:// Cradlepoint .com/ecm .

127. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 124 7.1 Connection Manager The router can establish an uplink via the Ethernet WAN port, WiFi as WAN, or the internal modem. If the primary WAN connection fails the router will automatically attempt to bring up a new link on another device. This feature is called failo ver. If Load B alance is enabled, multiple WAN devices may be plugged in and each may establish a link. 7.1.1 WAN Interfaces This is a list of the available interfaces used to access the Internet. You can enable, stop, or start devices from this section. By using the priorit y arrows (the arrows in the boxes to the left; these show if you have more than one available interface), you can set the interface the router uses by default and the order that it allows failover. In the example shown, Ethernet is set as the primary Inte rnet source, while the internal modem is set for failover. The Ethernet is “Unplugged” while the modem is “Connected.” Load Balance: If this is enabled, the router will use multiple WAN interfaces to increase the data transfer throughput by using any conne cted WAN interface consecutively. Selecting Load Balance will automatically start the WAN interface and add it to the pool of WAN interfaces to use for data transfer. Turning off Load Balance for an active WAN interface may require the user to restart any current browsing session. Enabled: Selected by default. Deselect to disable an interface. Click on the small box at the top of the list to select/deselect all devices for either Load Balance or Enabled . Click on a device in the list to reveal additional in formation about that device and to enable configuration options.

177. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 174 NAT - T KeepAlive Interval: Default: 20 seconds. Range: 0 - 3600 seconds. 20 seconds will be sufficient in almost all cases. Tunnel Connect Retry: Default: 30 seconds. Range: 10 - 255 seconds. 30 seconds will be sufficient in almost all cases. 7.7.8 VPN with NAT - T If one side of a planned VPN tunnel is behind a NAT (network address translation) firewall, the setup of your tunnel requires the following specific ations: 1. Each side of the tunnel must use both a Local Identity and a Remote Identity . These must match the identities on the other side: The Local Identity must match the Remote Identity on the other side of the tunnel , and vice versa. In this case, these identities can each be a simple word. 2. The Tunnel Name for the side of the tunnel that is not behind the NAT firewall must be “anonymous”. 3. The VPN tunnel must be initiated from the side that is behind the NAT firewall.

240. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 237 WPA WiFi Protected Access. A Wi Fi security enhancement that provides improved data encryption, relative to WEP. xDSL A generic term for the family of digital subscriber line (DSL) technologies, such as ADSL, HDSL, RADSL, and SDSL. Yagi antenna A d irectional antenna used to concentrate wireless signals on a specific location.

15. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 12 Modem Antennas: The Cradlepoint COR comes with two modem antennas to enhance reception for the embedded modem. These antennas are simple to attach and adjust. Power On/Off: • I = On • O = Off Power LED: • Blue = On • No light = Off

23. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 20 3.2.3 Connect to the Internet (IBR600) If you used the First Time Setup Wizard , you might have changed the “WiFi Network Name” or the “Security Mode” passwor d. If so, you will need to reconnect your device(s) to the IBR600 network. • Find the network . Look for your new personalized network name ( or the default SSID of the form “ IBR600 - xxx ” ). • Log in using your new personalized WiFi security password (or the Default Password found the bottom of the router) . Your network should now be up and running, and users who have the security password can access the network on WiFi - enabled devices.

154. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 151 7.2 Client Data Usage Client Data Usage displays upload and download traffic for each LAN client. Click Enable Client Data Usage Monitoring Service to begin tracking this information. This data is not retained between router reboots. For each client this shows: Name, IP ad dress, MAC address, amount of data (MB) and number of packets uploaded, amount of data and number of packets downloaded, and when traffic was last sent or received for that client (“ Last Traffic ”). The names that are shown are received during a DHCP excha nge. If a client disconnects and reconnects with a new IP address there will be an additional entry in this list. Pressing Reset Statistics will restart all counters at 0.

163. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 160 Home Agent IP Address , Hom e Agent Password , and Home Agent SPI – Your home agent will be defined by your NEMO service provider. Renew Registration – T he NEMO network regularly re - registers with the home agent (e.g., every 30 seconds). Specify the number of seconds between each check - in. MTU – Override the MTU (maximum transmission unit) of the NEMO tunnel. The TCP MSS (maximum segment size) is automatically derived from the MTU. Leave blank to rely on Path MTU Discovery .

227. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 224 8.10.2 System Config Save/Restore Backup Current Settings: Click on “Save to disk” to save your current settings to a file on a computer. Restore Settings: Click on “Upload from file” to restore your previous settings from a file on a computer. 8.10.3 Firmware Upgrade and System Config Restore Load new firmware and restore your previous settings from a file on a computer without rebooting between steps .

5. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 2 7.6 NHRP C ONFIGURATION ................................ .................... 161 7.7 VPN T UNNELS ................................ ................................ . 163 7.8 W I F I AS WAN / B RIDGE (IBR600) ................................ ..... 175 7.9 WAN A FFINITY / L OAD B ALANCING ................................ ..... 180 8 SYSTEM SETTINGS ................................ ......................... 185 8.1 A DMINISTRATION ................................ ............................. 186 8.2 D EVICE A LERTS ................................ ................................ . 205 8.3 GPIO C ONNECTOR ................................ ........................... 208 8.4 E NTERPRISE C LOUD M ANAGER ................................ ............ 210 8.5 F EATURE L ICENSES ................................ ............................ 212 8.6 H OTSPOT S ERVICES (IBR600) ................................ ............. 213 8.7 S ERIAL R EDIRECTOR ................................ ........................... 217 8.8 SNMP C ONFIGURATION ................................ .................... 219 8.9 S YSTEM C ONTROL ................................ ............................. 222 8.10 S YSTEM S OFTWARE ................................ ......................... 223 9 GLOSSARY ................................ ................................ ..... 225 10 APPENDIX ................................ ................................ ... 238 10.1 P RODUCT I NFORMATION AND S AFETY G UIDE ....................... 238 10.2 S PECIFICATIONS ................................ .............................. 240

111. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 108 Wireless Network Editor WiFi Name (SSID): When you are browsing for available wireless networks, this is the name that will be broadcast from this router for the selected network . This name is referred to as the SSID (service set identifier) . For security purpo ses, Cradlepoint highly recommends that you change this from th e pre - configured name. Hidden: This shows whether the router broadcasts it s SSID. It is somewhat harde r for hackers to find and attack a router that is not broad casting its SSID, which adds to the wireless security , but it is also more difficult for friendly users to attach to a WiFi network with a hidden SSID . Isolate: Select this to i solate all wireless clients so they cannot directly communicate with each other on the wireless network. WMM: WiFi Multimedia. This is a basic traffic shaping, or QoS (quality of service), system for the network. WMM works behind the scene s to set priorities for different types of traffic on your network. For example, video streams are give n higher priority than print jobs, since video streams need consistent throughput . Enabled: If the network is available.

210. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 207 Advanced: Delivery Options Email Subject Prefix: This optional string is prefixed to the alert subject. It can be customized to help you identify alerts from specific routers. Retry Attempts: The number of attempts made to send an alert to the mail server. After the attempts are exhausted, the a lert is discarded. Retry Delay: The delay between retry attempts.

132. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 129 7.1.4 IP Overrides IP overrides allow you to override IP settings after a device’s IP settings have been configured. Only the fields that are filled out will be overridden. Override any of the following fields: • IP Address • Subnet Mask • Gateway IP • Primary DNS Server • Secondary DNS Server

205. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 202 Sample Debug Session The following is an example of a debug session to discover a modem’s APN is mi sconfigured and needs to be set. Figure out the state of the modems on the router : 1234,rstatus, Receive the modem’s status and settings : 1234,mstatus, Set the modem’s APN to the correct setting : 1234,apn,br oadband, Verify the APN was set properly : 1234,mstatus, Continue to verify the status periodical ly to ensure that the modem connects: 1234,rstatus,

37. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 34 4.5 Enterprise Cloud Manager Registration To register your device with Cradlepoint Enterprise Cloud, navigate to Getting Started → Enterprise Cloud Manager Registration . Input your ECM Username and ECM P assword and click Register . You have now registered the device with Enterprise Cloud Manager. If you do not have ECM credentials, see http://www. Cradlepoint .com/ecm for details or sign up at: http://www. Cradlepoint .com/ecm - signup .

199. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 196 8.1.7 SMS SMS (Short Message Service, or text messaging) requires a cellular modem with an active data plan. SMS is not designed to be a full remote management feature: SMS allows you to connect to the router for a few s imple queries or commands with a text messaging service (e.g., from your phone) . A modem that does not have an active data connection may still be reachable by SMS because Internet traffic and SMS traffi c operate on separate channels, so SMS can be used to bring on offline router back online. SMS is enabled on the router by default. However, it only works if SMS is supported and enabled on the modem. Most modems have SMS enabled by default, but the carrier may charge a fee for each text message s ent or received. Contact your carrier to review these fees and/or to enable an SMS plan. Important notes about SMS: • Messages are limited to 160 characters. • SMS is not a guaranteed delivery protocol. The carriers do not guarantee that the SMS message will be delivered to the modem or that the modem’s response will be delivered to the sender. This means an administrator might have to send messages multiple times before the desired action is performed. • SMS is a slow protocol. It can take seconds or up to a fe w minutes for messages to be delivered. • SMS messages are not encrypted; they are sent in full readable text over the network.

124. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 121 Traffic Shaping / QoS Rule Editor The first page of the Traffic Shaping / QoS Rule Editor allows you enable/disable the rule, name the rule, specify a protocol for the rule, and select a queue to associate the rule with. Rule Enabled: (Default: Enabled.) Deselect this to disable this rule. This can be useful for quickly changing configur ations. If both upload QoS and download QoS are disabled then the rule will disable automatically. Rule Name: Create a name for the rule that is meaningful to you. Protocol. The protocol used by the messages: TCP /UDP, TCP , UDP , or ICMP . Select “Any” if yo ur rule does not control a specific type of message that uses a specific protocol. Queue Name: Select a queue to associate this rule with. Click Next to continue to the next page.

173. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 170 7.7.4 Page 4: IKE Phase 2 Perfect Forward Secrecy (PFS) : Enabling this feature will require IKE to generate a new set of keys in Phase 2 rather than using the same key generated in Phase 1. Additionally, the new keys generated in Phase 2 (with this option enabled) are exchanged in an encrypted session. Enabling this feature affords the policy greater security. Key Lifetime : The lifetime of the generated keys of Phase 2 of t he IPs ec negotiation from IKE. After the time has expired, IKE will r enegotiat e a new set of Phase 2 keys. Phase 2 has the same selection of Encryption , Hash , and DH Groups as Phase 1, but you are restricted to only one DH Group. Phase 2 and Phase 1 selections do not have to match.

174. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 171 7.7.5 Page 5: Dead Pe e r Detection D ead Peer Detection (DPD) d efines how the router wil l detect when one end of the IPs ec session loses connec tion while a policy is in use. Connection Idle Time allows you to configure how l ong the router will allow an IPs ec session to be idle before beginning to sen d Dead Peer Detection (DPD ) packets to the peer machine. Request Frequency allows you to adjust the delay between these DPD packets to send as quickly as every 2 s econds up to 30 seconds apart. Additionally, you can specify how many Maximum Requests to s end at the selected time interval before the tunnel is considered dead . You must click Finish to save your VPN tunnel.

48. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 45 5.5 Hotspot Clients (IBR600) View the status of the clients that have logged in through the Hotspot/Captive Portal. View: • Hostname • IP address • MAC address • Data Usage (both IN and OUT) • Time Online You may revoke a client's access to the Internet by clicking the 'Revoke' button.

99. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 96 IP v6 Settings : IPv6 must be enabled through the WAN initially: go to Internet → Connection Manager to enable IPv6. IP v6 Address Source : By default, this is set to Delegated , which means the IPv6 address range for the LAN is passed through from the WAN side. Change this to Static to input your own IPv6 address range here, or select None to explicitly disable IPv6 LAN connectivity.

100. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 97 Interfaces : Select network interfaces to attach to this network. Choose from WiFi, Ethernet ports, and VLAN interfaces. Double - click on any of the interfaces shown on the left in the Available section to move them to the Selected section on the right (or highlight an interface and click the “ + ” button). To deselect an interface , double - click on an interface in the Selected section (or highlight the interface and click the “ – “ button). If you want more interface options, you must configure additional WiFi, Ethernet ports, and VLAN interfaces separately. See the Local Network Interfaces section below (on this same administrat ion page : Network Settings → WiFi / Local Networks ).

101. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 98 Access Control : Tune the access control settings of this network t o match the intended use. Simply select or deselect any of the following: • LAN Isolation: When checked, this network will NOT be allowed to communicate with other local networks. • UPnP Gateway: Select the UPnP (Universal Plug and Play) option if you want to enable the UPnP Gateway service for computers on this network. • Admin Access: When enabled, users may access these administration pages on this network.

24. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 21 3.3 Common Proble ms Please visit Cradlepoint Knowledgebase at http://knowledgebase. Cradlepoint .com/ for more help and answers to your other questions. 3.3.1 You are Connected to the Router but Cannot Connect to the Internet Make sure that you have an active data plan and that your modem has been activated. A wireless broadband data plan must be added to your IBR600 /IBR650 . Wireless broadband data plans are a vailable from wireless carriers such as AT&T, Sprint , and Verizon. A new line of service can be added or a data plan can be transferred from an existing account. You will need the ESN number from your product label on your router to add or transfer a line of service. After adding a data plan to the modem, you must activate the modem: 1. L og in to the router’s administration pages (see Accessing the Administration Pages ). 2. S elect Internet from the top navigation bar and Connection Manager from the drop down menu ( Internet → Connection Manager ). 3. F ind and s elect the Cradlepoint modem. 4. Click Control . 5. Cl ick Activate in the popup. Finally, if you have an active data plan and you have already activated your modem, you may be out of range of your service provider. Check your signal strength in the I nternet section of the Dashboard ( Status → Dashboard ) . If you have a weak signal in your location, contact your service provider. If you are still not online after activating the modem , call Cradlepoint Technical Support for further assistance.

47. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 44 5.4 GRE Tunnels View the status of configured GRE Tunnels. To set up or edit a GRE tunnel, go to Internet → GRE Tunnels . Included information: • Name • Status • Transmit (packets/bytes) • Receive (packets/bytes)

86. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 83 6.5.2 MAC Logging Configuration Enable MAC Logging : Enabling MAC Logging will cause the router to log MAC addresses that are connected to the router. MAC addresses that you do not want to have logged (addresses that you expect to be connected) should be added to the “Ignored MAC Addresses” list. You can configure the router to send an alert if a connected device has a MAC address that the router doesn’t recognize. Go to System Settings → Device Alerts to set up these email alerts. Ignored MAC Addresses : This is the list of MAC addresses that will not p roduce an alert or a log entry when they are connected to the router. These should be MAC addresses that you expect to be connected to the router. To add MAC addresses to this list, simply select devices shown in the MAC Address Log and click “Ignore.” You can also add addresses manually. MAC Address Log : This shows the last 64 MAC addresses that have connected to the router , as well as which interface was used to connect. The time/date that is logged is the time of the first connection. The page may need t o be refreshed to show the most recent log entries. Double - clicking on entries from this list will add them to the Ignored MAC Addresses list.

119. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 116 6.9 WiPipe QoS When WiPipe QoS (Quality of Service, also known as “Traffic Shaping”) is enabled, the router will control the flow of Internet traffic according to the user - defined rules. In other words, Traffic Shaping improves performance by allowing the user to prioritize applications. Enable WiPipe QoS: Click on this box to open options for controlling Internet traffic. You can assign maximum Upload Speed and Download Speed values and define your own Traffic Shaping rules. Upload Speed and Download Speed : Setting the Upload Speed and Download Speed is required to control traffic flow accurately. Adjust the slid ing bar to restrict the maximum upload and/or download speed for the Internet source(s) you are using. For example, you might restrict the upload speed to prioritize available bandwidth for download or to reduce overall bandwidth use in order to lower cost s. It is recommended that you experiment with different values for your particular Internet connection for best results.

120. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 117 NOTE: Upload speed is the speed at which data can be transferred to your ISP. Download speed is the speed at which data can be transfer red to you from your ISP . You can test your connection speed s with a service such as speedtest.net . 6.9.1 Queues Queues and rules work in conjunction to prioritize bandwidth for the most critical operations. Multiple rul es can be associated with one queue. Use rules to associate your more critical operations with queues that have higher bandwidth settings. For example, you might have two queues, one for “critical” and one for “secondary” with critical having most of the b andwidth percentage. Use rules to associate your most important bandwidth needs (POS system, VoIP, etc.) with the critical queue. Restrict the bandwidth available for less important functions with the secondary queue. Assign percentages of both upload and download bandwidth to each queue. If you assign 80% download bandwidth to the first queue, the next queue will be forced to be 20% or less. Click Add to create a new Traffic Shaping/QoS queue. Queue Name: Choose a name that is meaningful to you. Upload Bandwidth Enable Upload QoS: ( Default: Enabled.) Deselect if you want your rule to apply to download traffic only. Leave this selected to include upload restrictions with this queue. Borrow Spare Bandwidth: ( Default: Enabled.) When this is enabled, the int erfaces/protocols associated with this rule will borrow unused bandwidth from other rules. Disabling borrowing will restrict the traffic to the specified bandwidth. Higher priority queues will be offered excess bandwidth first. Upload Bandwidth: Th is is th e percentage of the connected WAN upload bandwidth that will be reserved for the specified traffic. The maximum value is adjusted to the remaining percentage after other rules receive their share.

241. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 238 10 APPENDIX 10.1 Product Information and Safety Guide This important Product Information and Safety Guide contains safety, handling, disposal, regulatory, trademark, copyright, an d s oftware licensing information. Read all safety information below and operating instructions before using the IBR 600 /IBR650 device to avoid injury. SAFETY AND HAZARDS Under no circumstances should the IBR 600 /IBR650 device be used in any areas (a) where bl asting is in progress, (b) where explosive atmospheres may be present, or (c) that are near (i) medical or life support equipment, or (ii) any equipment which may be susceptible to any form of radio interference. In such areas, the IBR 600 /IBR650 device MUS T BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with such equipment). In add ition, under no circumstances should the IBR 600 IBR650 device be used in any aircraft, regardless of whether the aircraft is on the ground or in flight. In any aircraft, the IBR 600 /IBR650 device MUST BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with various onboard systems on such aircra ft). Furthermore, under no circumstances should the IBR 600 /IBR650 device be used by the driver or operator of any vehicle. Such use of the device will detract from the driver or operator’s co ntrol of that vehicle. In some jurisdictions, use of the IBR 600 /IBR650 device while driving or operating a vehicle constitutes a civil and/or criminal offense. Due to the nature of wireless communications, transmission and reception of data by the IBR 600 /IBR650 device can never be guaranteed, and it is possible that data co mmunicated or transmitted wirelessly may be delayed, corrupted (i.e., contain errors), or totally lost. The IBR 600 /IBR650 device is not intended for, and Cradlepoint recommends the device not be used in any critical applications where failure to transmit o r receive data could result in property damage or loss or personal injury of any kind (including death) to the user or to any other party. Cradlepoint expressly disclaims liability for damages of any kind resulting from: (a) delays, errors, or losses of an y data transmitted or received using the device; or (b) any failure of the device to transmit or receive such data. Warning: This product is only to be installed by qualified personnel! To comply with FCC/IC regulations limiting both maximum RF output po wer and human exposure to RF radiation, the maximum antenna gain must not exceed 5 dBi in the Cellular band and 4 dBi in the PCS band. ANTENNA CONSIDERATIONS Although the antenna model(s) used with these devices meet(s) the Industry Canada Radio Frequenc y requirements, it is possible that the future customers may swap them for different ones without network providers knowledge and approval. Such customers must be made aware of, and follow, the Radio Frequency requirements applied in the Technical Approval : • RSS - 102 “Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands)” • RSS - 12 9 “800 MH z Dual - Mode CDMA Cellular Telephones” • RSS - 132e “Cellular Telephones Employing New Technologies O perating in the Bands 824 - 849 MHz and 869 - 894 MH z” • RSS - 133 r1 “2 GHz Personal Communications Services” FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC Ru les. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio f requency energy and, if not installed and used in accordance with the instruct ions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be det ermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect t he equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

25. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 22 4 WEB INTERF ACE – ESSENTIALS The Cradlepoint COR has a Web interface for configuration and administration of all features. T he interface is organized with five tabs at the top of the screen: • Getting Started • Status • Network Settings • Internet • System Settings Web Interface – Essentials contains the following sections to help you more quickly and easy navigate these administration pages: 4.1 Administrator Login 4.2 Getting Started – First Time Setup 4.3 Quick Links 4.4 Configuration Pages 4.5 Enterprise Cloud Ma nager Registration 4.6 IP Passthrough Setup

33. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 30 4.3 Quick Links The Cradlepoint logo in the upper left - hand corner of all the administration pages is a link to the Dashboard ( Status → Dashboard ) , which displays fundamental information about the router. The black bar across the top provides quick access to important information and controls. Internet Connection This link s to Status → Internet Connection s where you can view in - depth information about your Internet sources . Click on this green dot to link to Internet → Connection Manager where you can manage your WAN interfaces. Click on the image of four signal bars to open a “Modem Connection Quality” p opup window that shows the strength of your Internet signal.

115. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 112 VLAN Interfaces A virtual local area network, or VLAN, functions as any other physical LAN, but it enables computers and other devices to be grouped together even if they are not physically attached to the same network switch. To enable a VLAN, select a VID (virtual LAN ID) and a group of Ethernet ports through which users can access the VLAN. Then go back up to the Local Network Editor to attach your new VLAN to a network. To use a VLAN, the VID must be sha red with another router or similar device so that multiple physical networks have access to the one virtual network. Click Add to create a new VLAN interface. VLAN Editor VID: An integer value that is the Virtual LAN ID. Ethernet Group: Select the LAN por ts with which you want to associate the VLAN ID from a dropdown list. Your Ethernet group must be created separately under Ethernet Port Configuration . Click Submit to save your configured VLAN.

153. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 150 Condition: Select “is,” “is not , ” “starts with,” “contains,” or “ends with” to create your condition’s statement. Value : If the correct values are available, select from the dropdown list. Yo u may need to manually input the value. The condition will be of the following form: “ (When) is/is not (value) ” For example: “ Type is not WiMAX ” “ Port is Internal USB Port ” Once you have established the condition for your configuration rule, choose from the other tabs to set the desired configuration. Use the arrow buttons along the top to reveal more tab options. All of the tab options: General Settings , Ethernet Settings , M odem Settings , WiMAX Settings , CDMA Settings , and SIM/APN Settings have the same configuration options shown above in the WAN Configuration section (the options for Configuration Rules are the same as they are for individual devices).

155. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 152 7.3 Data Usage Data Usage Management & Alerts allows you to create and manage rules that he lp control the data usage of a m odem. If you have a limited data plan or a price increase on your plan after a certain amount of usage , a Data Usage Rule can help you track these amounts. You can set a rule to shut down use of a modem and/or send a message when you reach a data usage amount you set. Enable Data Usage: Enabled/Disabled. (Default: Disabled.) When you select Enabl ed , you will see the Data Usage Agreement shown to the right. The purpose of this agreement is to ensure that you understand that the data numbers for your router might not perfectly match those of your carrier: Cradlepoint cannot be held responsible. You must accept the agreement by click ing Yes in order to begin creating data usage rules. Warning: You should set your data limits lower than your Data Allowance and regularly compare the numbers provided by the router with the numbers from your ca rrier.

49. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 46 5.6 Internet Connections The Internet Connections submenu option provides a list of attached WAN devices used as the Internet source for the IBR600 /IBR650 . Select one of these devices to see detailed inform ation about that particular device. For each type of device, different information will be included in the Device Information section. Possibl e devices include: • Ethernet • LTE /EVDO Modem (embedded modem) • LTE/HSPA+ Modem (embedded modem) • HSPA+ Modem (embedded modem) • EVDO Modem (embedded modem) • WiFi Depending on the device, possible information will be in the following sections: Diagnostics, General Information, IP Information, and Statistics. For modems, the Diagnostics section provides spec ific information about how the modem is communicating with its carrier.

181. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 178 Click “Refresh” if a WiFi network to which you want to connect is invisible. Site Survey only operate s on the 2.4 GHz band. You have the option to manually add network profiles, but it is usually much easier to import them from Site Survey . Either click on Add under “ Saved Profiles ” or select a WiFi network in “ Site Survey ” and click Import . If you import a network from Site Survey , most of the information about the network will already be completed. You need to input the password (if there is one) and then click submit to save the WiFi as WAN profile.

211. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 208 8.3 GPIO Connector The power connector includes two pins defined for general purpose LVTTL compatible input and output. These pins are ESD protected and the input is 5V tolerant. NOTE: GPIO f unctionality requires a separate adapter to connect to the I/O pins. Pin Definition 1 Ground 2 12VDC Power 3 Input: LVTTL Digital Input with 50K ohm pullup to 3.3VDC (5V tolerant) 4 Output: LVTTL Digital Output (capable of source/sink of 50mA) This section is used to configure these Input and Output General Purpose I/O pins. Current Value: Displays HIGH or LOW for both the Input Pin and Output Pin.

16. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 13 WiFi LED: • Green = On and operating normally • No light = Off Modem LED: • Green = On and operating normally • Blinking Green = Connecting • Amber = Not available (idle, for example) • Blinking Amber = Cellular data connection error • No light = Off Additional LED Indications: Factory reset button detected Wi Fi and modem LEDs blink amber twice Error during USB firmware upgrade Wi Fi and modem LEDs blink red

59. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 56 5.7 Routing System Routes displays routes associated with networks connected to the router as well as routes learned from routing protocols (such as RIP or BGP). Static Routes displays user - specified routes configured in Network Settings → Routing . There are also tables displaying information for GRE Routes , VPN Routes , and NEMO Routes . Configure the settings for these routes under the Internet tab.

73. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 70 6.2 DHCP Server DHCP stands for Dynamic Host Co nfiguration Protocol. The built - in DHCP s erver automatically assign s IP addresses to the computers and other devices on each local area network (LAN). In this section you can view a list of assigned IP addresses and reserve IP addresses for particular devices. Active Leases: A list of devices that have been provided DHCP leases. The DHCP s erver automatically assigns these leases. This list will not include any devices that have static IP addresses on the network. Select a device and click Reserve to a dd the device and its IP address to the list of Reservations . Reservations: This optio n lets you reserve IP addresses; you can assign the same IP address to the network device with the specified MAC address any time it requests an IP address. This is almo st the same as when a device has a static IP address except that the device must still request an IP address from the router. The router will provide the device the same IP address every time. DHCP Reservations are helpful for server computers on the local network that are hosting applications such as Web and FTP. Servers on your network should either use a static IP address or a reservation. While you have the option to manually input the information to reserve an IP address (Hostname, Hardware Addr, IP A ddr) , it is much simpler to select a device under the Active Leases section and click “ Reserve .” The selected device ’s information will automatically be added under Reservations .

114. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 111 Ethernet Port Group Editor A Port Group represents a logical grouping of Ethernet ports. Any c omputers physically connected to ports in a group will be allowed to freely communicate with each other. Since the IBR600 /IBR650 has only 2 Ethernet ports, this feature will rarely be necessary. It is possible, however, to set both ports as LAN ports (or both ports as WAN ports) and then either separate them or group them together. (For example, you could use one for the primary ne twork and one for a guest network, or you could use both for the primary network.) NOTE: When a port group uses the LAN mode you must separately ensure that this logical interface is attached to a Local IP Network in the top panel of this page. Port Grou p ID: The Group ID field provides a reference to this grouping of ports to be used in other parts of the router configuration. For example, this ID is referenced in the Local IP Networks configuration to attach this logical group of Ethernet ports with a n etwork configuration. Use a simple short text phrase to describe a group, such as "main", "guestports", "backup_wan", etc. Select one or more ports to create a port group that you can subsequently attach to a network in the Local Network Editor . Double - cl ick on any of the Ethernet ports shown on the left in the Available section to move them to the Selected section on the right (or highlight a port and click the + button). To deselect an Ethernet port, double - click on an interface in the Selected section ( or highlight the port and click the – button).

97. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 94 6.8.2 Local Network Editor Click Add or select a network and click Edit to open the Local Network Editor to make configure a LAN. The Local Network Editor contains the following tabs: General Settings, IPv4 Settings, IPv6 Settings, Interfaces, Access Control, IPv4 DHC P, IPv6 Addressing, Multicast Proxy, Schedule, VRRP, STP, and Wired 802.1X . General Settings : Enabled: Push to manually disable a network. Also, some settings could cause a network to be automatically disabled: click here to re - enable the network. Name: This primarily helps to identify this network during other administration tasks. Hostname: [Default: cp (for Cradlepoint )] The DNS name associated with the router's local area network IP address. NOTE: You can access the router’s administration pages by typing the hostname into your browser, so if you change “cp” to another hostname, you can access the administration pages through the new hostname.

158. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 155 7.3.2 Template Configuration Templates allow you to control multiple WAN devices with the same rule. Each WAN device that matches a template will automatically have its own rule created. Click Add to configure a new Template rule. Create a Template Name that you can recognize. The template will apply to one of the following WAN types : • All WAN • All Ethernet • All Modems Select one of these types . The rest of the rule settings options match those in the Data Usage Rules . See the section above for additional information about how to configure your template usage rules.

226. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 223 8.10 System Software 8.10.1 Firmware Upgrade This allows the administrator to load new firmware onto the router to add new features or fix defects. If you are happy with the operation of the router, you may not want to upgrade just because a new version is available. Check the firmware release notes ( www. Cradlepoint .com/firmware ) for information to decide i f you should upgrade. Current Firmware Version: Shows the number of the current firmware and the date it was updated. Available Firmware Version: If there is a new firmware version available, this will list the version number. Click “Check Again” to have the router check the newest firmware. Factory Reset: Set default settings to match the new firmware. This is safest, as settings may have changed. You should back up your current settings and restore them after the new firmware is loaded. Automatically che ck for new firmware: Check for an available firmware update once a day. Automatic (Internet): Have the router download the file and perform the upgrade with no user interaction. Manual Firmware Upload: Upload the router firmware from an attached computer. (Go to www. Cradlepoint .com/firmware to download the firmware.)

12. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 9 Power 12VDC : The power connector includes two pins for power and two pins for GPIO (General Purpose Input/Output) functionality. The included power adapter, however, only connects to the power pins. Y ou will need a separate adapter for GPIO functionality. Reset: You can return your router to factory default settings by pressing and hold ing the Reset button. This button is recessed, so it requires a pointed object such as a paper clip to press. Press and hold for 10 seconds to initiate reset. Ethernet Ports: By default, the IBR600 /IBR650 has one WAN (Wide Area Network — your Internet source ) port and one LAN ( Local Area Network ) port. Each of these ports can be reconfigured , however, if you need two LAN or two WAN Ethernet ports . Ethernet LED : • Solid Green – connected • Blinking Green – data transfer activity USB Port (Standard - A) : This port ca n be used for an external USB modem or to attach a direct firmware upgrade to enable manual firmware upgrades if necessary. (Hardware version 1.3 changed from a micro USB port to a full - size Standard - A USB port.) WiFi Antenna s (IBR600 only) : The IBR600 comes with two 2.4 GHz WiFi antennas (Reverse SMA). These antennas are simple to attach and adjust for maximum WiFi broadcast. The antenna position shown is not allowed: neither WiFi nor modem antennas should lie on top of each other.

22. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 19 3.2.2 Accessing the Administration Pages For most users the IBR600 /IBR650 can be used immediately without any specia l configuration changes. If you woul d like to change your network name or password or configure any of the advanced features of your router , you will need to log in to the administration p ages : • Access your router ’s Administrator Login screen by o pen i ng a w eb browser window and typing “ cp/ ” (your router’s default hostname) or the IP address “ 192.16 8.0.1 ” into the address bar. • Enter your Default Password . Th is password can be found on the bottom of the router . Then click the L OGIN button . • When you log in for the first time, you will be automatically directed to the First Time Setup Wizard . Follow the instructions given with the Wizard or see Getting Started – First Time Setup for more information about using the First Time Setup Wizard .

203. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 200 This command returns info about the router along with the port names for ports with attached modems. These port names may be helpful for using the commands that follow. Example of response: uptime: 0:35:13 FW: v4.4.0 eth0: 10/100/1000 Ethernet Switch: connected usb3: MC200P: connected mstatus : Get modem status* • S yntax: <password>,mstatus,[port , ] • Example : 1234,mstatus, //return status of highest priority modem • Example : 1234,mstatus,usb1, //return status of modem plugged into port usb1 This command returns info about the indicated modem’s status. The resulting data reflects the modem model number, service type, and connection status and values. Example of response: Model: MC200P Service: HSPA+ SIM Status: READY RSSI: - 62 dbm ECIO: - 4 APN: wwan.ccs IP Addr: 166.136.142.172 mreboot : Reboot the modem* • S yntax: <password>,mreboot,[port , ] • Example: 1234,mreboot, //This will reboot the highest priority modem. • Example: 1234,mreboot,usb1, //This will reboot the modem on port usb1

225. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 222 8.9 System Control Restore to Factory Defaults: This changes all settings back to their default values. Reboot The Device: This causes the router to restart. Scheduled Reboot: This causes the router to restart at a user - determined time. Watchdog Reboot: This causes the router to automatically restart when it determines an unrecoverable error condition has occurred. Ping Test: A simple test to check Internet connectivity. Type the Hostname or IP address of the computer you want to ping and press 'Enter' or click the 'Ping' button. Advanced: System Automatic Reboot and Ping Test

66. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 63 6 NETWORK SETTINGS The Network Settings t ab provides access to nine submenu options for administering the following functions/tasks . These functions are all related to controlling the LAN (Local Area Network), the network you set up with the IBR600 /IBR650 . • Content Filtering • DHCP Server • DNS • Firewall • MAC Filter / Logging • Routing • Routing Protocols • WiFi / Local Network s • WiPipe QoS

110. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 107 6.8.3 Local Network Interfaces Each LAN type — WiFi, Ethernet, and VLAN — has a separate section with configuration options. Unless the default con figuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired interface options for a network. You can then select these interfaces to add to a network in the Local Network Editor (see above). Select from the follow ing tabs: • Wireless (WiFi) Network Settings • Ethernet Port Configuration • VLAN Interfaces Wireless (WiFi) Network Settings The IBR600 can broadcast two SSIDs (service set identifiers — the names for WiFi networks ) . One primary WiFi network is enabled by default, while you may have enabled a second guest network when usi ng the First Time Setup Wizard. You have the ability to change the settin gs for either of these networks. Wireless Radio: Enable/Disable. (Default: Enabled). Leave enabled unless you don’t want any WiFi networks broadcast from your router. Select a WiFi network and click Edit to change the settings.

117. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 114 Channel Selection Schedule: When using the "Smart" channel selection, this controls whether the router will periodically rescan for a better channel and change to it. Select from “Once,” “Daily,” “Weekly,” or “Monthly.” Note that there may be a momentary WiFi disconnection while the channel changes. Client Timeout: (Default: 300 seconds) If the access point is not able to communicate with the client it will disconnect after this amount of time in seconds. TX Power: Normally the wireless transmitter operates at 100% power. In some ci rcumstances, however, there might be a need to isolate specific frequencies to a smaller area. By reducing the power of the radio, you can prevent transmissions from reaching beyond your corporate/home office or designated wireless area. RTS Threshold: Whe n an excessive number of wireless packet collisions are occurring, wireless performance can be improved by using the RTS/CTS (Request to Send/Clear to Send) handshake protocol. The wireless transmitter will begin to send RTS frames (and wait for CTS) when data frame size in bytes is greater than the RTS Threshold. This setting should remain at its default value. Fragmentation Threshold: Wireless frames can be divided into smaller units (fragments) to improve performance in the presence of RF interference an d at the limits of RF coverage. Fragmentation will occur when frame size in bytes is greater than the Fragmentation Threshold. This setting should remain at its default value. Setting the Fragmentation value too low may result in poor performance. DTIM: A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the wireless router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wir eless clients detect the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Valid settings are between 1 and 255. Beacon: Beacons are packets sent by a wireless router to synchronize wireless devices. Specify a Beac on Period value between 20 and 1000 milliseconds. WPS: WiFi Protected Setup is a method for easy and secure establishment of a wireless network. It can be used instead of passwords when connecting clients that support WPS. Short Slot: Slot Time is the peri od wireless clients use in determining if the channel is free for transmission. Enabling this value allows clients that can utilize a shorter time to do so. Disabling this option forces all clients to use a longer backo ff check and thus may reduce network throughput while reducing the number of transmission collisions.

207. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 204 8.1.9 Router Services By default, router services ( Enterprise Cloud Manager , NTP, etc. ) connect to the router via the WAN. In some setups it makes sense to use the LAN instead. For example, if your router is used strictly for 3G/4G failover behind another router, you may not want to use 3G/4G data unnecessarily. Select Use LAN Gateway to set your router services to connect via the LAN. LAN Gateway Address : Input the IP address of the LAN side connection. If this is a 3G/4G fail over router operating behind another router, the LAN Gateway Address is the IP address of that other router. DNS Server and Secondary DNS Server : The primary and secondary DNS server numbers match the static DNS values (set at Network Settings → DNS ). You can leave the default values or set them manually here. (Changing these values also changes the static DNS values.)

103. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 100 Custom Options: Input a custom DHCP option by first clicking the Custom Options field to enable it and then clicking “Add” at the top of the table that appears . There are close to 200 possible DHCP options available. One of the more common uses is to assign a VoIP phone server using option 66 (Server name). • Option: Select an option from the dropdown list or manually enter the number of an option. A complete list of options is available from IANA. • Value: Generally this field should be a string, IP address, or numeric value. Some fields can accept both IP addresses and hostnames – in these cases you may need to wrap this value in quotes. For example, option 66 (Server name) requires quotes around IP addresses. DHCP Relay : DHCP Relay communicates with a DHCP server and acts as a proxy for DHCP broadc ast messages that must be routed to remote segments. This is accomplished by converting broadcast DHCP messages to unicast messages to communicate between clients and servers. DHCP Server Address : An optional DHCP server address if more than one DHCP serve r is located on the network. This field is only available when DHCP Relay is enabled.

162. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 159 7.5 Network Mobility (NEMO) Network Mobility (NEMO) is an Internet standards track protocol defined in RFC 5177 . The protocol allows session continuity for every node in a mobile network as the network moves. This is a licensed feature. Without a valid license, settings can be configured, but will not be implemented. See System Settings → Feature Licenses for more information. NEMO requires a service provider, e.g. Verizon Wireless Private Network with DMNR (Dynamic Mobile Network Routing). Your NEMO service provider will define many of the setti ngs for your NEMO configuration. Once you have a NEMO service provider and a valid feature license, add networks to the Networks Routed by NEMO section by first clicking Add . In the popup window, input: • Network Address • Netmask The Network Address and Netmask, or subnet mask, together define a range of IP addresses that comprise the local network you want associated with the NEMO settings. 7.5.1 Network Mobility (NEMO) Settings Home IP Address and Home Netmask – These may be provided by your NEMO service prov ider. The IP address is a placeholder, “dummy” address; any IP address can be used (1.2.3.4 is common).

193. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 190 8.1.3 Local Man agement Enable Internet Bounce Pages: Bounce pages show up in your web browser when the router is not connected to the Internet. They inform you that you are not connected and try to explain why. If you disable bounce pages then you will just get the usual browser timeout. In the normal case when the router is connected to the Internet you don't see them at all. Local Domain: The local domain is used as the suffix for DNS entries of local hosts. This is tied to the hostnames of DHCP clients as DHCP_HOSTNAME.LOCAL_DOMAIN. System Identifier: Thi s is a customizable identity that will be used in router reporting and alerting. The default value is the MAC address of the router. Require HTTPS Connection: Check this box if you want to encrypt all router administration communication. Secure HTTPS Port: Enter the port number you want to use. The default is 443. Enable SSH Server : When the router's SSH server is enabled you may access the router's command line interface (CLI) using the standards - based SSH protocol. Use the username "admin" and the standar d system password to log in. SSH Server Port : Default: 22.

242. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 239 FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device mu st accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possibl e. This device and its antenna(s) must not be co - located or operation in conjunction with any other antenna or transmitter. IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled en vironment. This equipmen t should be installed and operated with minimum distance 20cm between the radiator & your body. OPEN SOURCE SOFTWARE This product contains software distributed under one or more of the following open source licenses: GNU General Public Licens e Version 2, NetBSD Foundation License, and PSF License Agreement for Python 3.1.1. For more information on this software, including licensing terms and your rights to acces s source code, contact Cradlepoint at www. Cradlepoint .com/opensource . WARRANTY INFORMATION Limited 1 Year Warranty included featuring 5x12 technical support + access to software updates + hardware repair or replacement . Optional Enterprise Support Agreement available with 24x7 technical supp ort + software updates and upgrades + advanced hardware exchange . Cradlepoint , Inc. warrants this product against defects in materials and workmanship to the original purchaser (or the first purchaser i n the case of resale by an authorized distributor) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product, at Cradlepoint ’s discretion. Cradlepoint does not warrant that the operation of the device will meet your requirements or be error free. Within thirty (30) days of receipt should the produ ct fail for any reason o t her than damage due to customer negligence, purchaser may return the product to the point of purchase for a full refund of the purchase price. If the purchaser wishes to upgrade or convert to another Cradlepoint , Inc. product within the thirty (30) day pe riod, purchaser may return the product and apply the full purchase price toward the purchase of another Cradlepoint product. Any other return will be subject to Cradlepoint , Inc.’s existing return policy. LIMITATION OF CRADLEPOINT LIABILITY The informati on contained in this Quick Start Guide is subject to change without notice and does not represent any commitment on the part of Cradlepoint or its affiliates. CRADLEPOINT AND ITS AFFILIATES HEREBY SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL: (A) DIRECT , INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING WITHOUT LIMITATION FOR LOSS OF PROFITS OR REVENUE OR OF ANTICIPATED P ROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE THE IBR 600 /IBR650 DEVICE, EV EN IF CRADLEPOINT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF SUCH DAMAGES ARE FORESEEABLE; OR (B) CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall the aggregate liability of Cradlepoint and/or its affiliates arising under or in connection with the IBR 600 /IBR650 device, regardless of the number of events, occurrences, or claims giving rise to liability, exceed the price paid by the original purchaser of the IBR 600 /IBR650 device . PRIVACY Cradlepoint may collect general data pertaining to the use of Cradlepoint products via the Internet including, by way of example, IP address, device ID, operating system, browser type and version number, etc. To review Cradlepoint ’s privacy pol icy, please visit: http://www. Cradlepoint .com/privacy . OTHER BINDING DOCUMENTS; TRADEMARKS; COPYRIGHT By activating or using your IBR 600 /IBR650 device, you agree to be bound by Cradlepoint ’s Terms of Use , User License and other Legal Policies, all as posted at www. Cradlepoint .com/legal. Please read these documents carefully. Cradlepoint , the Cradlepoint logo, and IBR 600 /IBR650 are trademarks of Cradlepoint , Inc.

104. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 101 IPv6 Addressing : Address Configuration Mode: SLAAC Only – SLAAC stands for s tateless address autoconfiguration. The router regularly generates a router advertisement that includes network prefix and routing information, allowing clients to autogenerate an address and start communicating on the network. Clients utilize neighbor discovery protocols to ensure multiple clients on the subnet have not chosen an identical address. SLAAC with DHCP – (Default) IPv6 DHCP provides an additional client configuration method and is regularly combined with SLAAC to provide DNS servers (a shortcoming in the original SLAAC specific ation) and additional options not supported by SLAAC. By defaulting to SLAAC with DHCPv6, all IPv6 - capable clients on the network should be configurable with IPv6 connectivity. • DHCP Range Start: T he beginning of the range that will be used for IPV6 DHCP a ddresses. The IPv6 range will always start at 1. • DHCP Range End: The ending IP address in the DHCP Server range is the end of the reserved pool of IP addresses that will be given to any DHCP - enabled computers on your network. • IPv6 DHCP Lease Time: This spe cifies how long DHCP - enabled computers will wait before requesting a new DHCP lease. Disable SLAAC and DHCP – Disable both IPv6 address configuration modes.

202. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 199 SMS Commands Below is a list of supported SMS messages and the syntax format. Due to security concerns, the set of command s are intentionally limited to those that can configure a modem’s connection , but cannot lock the administrator out due to malicious modem ch anges. Therefore, if an unsolicited request adjusts the modem’s configuration via SMS, an administrator can still a ccess the modem via SMS. Command syntax: <password>,<comman d> ,[arg1,] [ arg2,] All commands start with the password – either the default of the last 8 digits of the router's MAC address or the administrator - configured password. Commands can have an optional number of arguments. NOTE: The trailing comma on the command is important to allow the SMS engine to distinguish the final argument from other info rmation the SMS client might append to the message without your knowledge . Supported Commands : reboot : Re boot the router (not the modem) • Syntax: <password>,reboot, • Example: 1234,reboot, restore : Restore the router to factory defaults • Syntax: <password>,restore, • Example: 1234,restore, rstatus : Get router status • Syntax: <password>,rstatus, • Example: 1234,rstat us,

222. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 219 8.8 SNMP Configuration SNMP, or Simple Network Management Protocol, is an Internet standard protocol for remote management. You might use this instead of WiPipe Central if you want to remotely manage a set of routers that include both Cradlepoint and non - Cradlepoint products. En able SNMP: Selecting “Enable SNMP” will reveal the router’s SNMP configuration options. Enable SNMP on LAN: Enabling SNMP on LAN will make SNMP services available on the LAN networks provided by this router. SNMP will not be available on guest or virtual n etworks that do not have administrative access. LAN port #: Use the LAN port # field to configure the LAN port number you wish to access SNMP services on. (Default: 161) Enable SNMP on WAN: Enabling SNMP on WAN will make SNMP services available to the WAN interfaces of the router. WAN port #: Use the WAN port # field to configure which publicly accessible port you wish to make SNMP services available on. (Default: 161) SNMPv1: SNMP version 1 is the most basic version of SNMP. SNMPv1 will configure the route r to transmit with settings compatible with SNMP version 1 protocols. SNMPv2 c : SNMP version 2c has the same features as v1 with some additional commands. SNMPv2c will configure the router to use settings and data formatting compatible with SNMP version 2c.

224. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 221 Trap community string: The trap notifications will be returned to the trap server using this SNMPv1 trap community name . Address for trap server: Enter the address of the host system that you want trap alerts sent to. Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default: 162) NOTE : Sy stem information via SNMP is by default Read - Writable. However, if the value is set here, that field will become Read - Only. System Contact: Enter in an email address. System Name: Enter in the router’s host name. System Location: Enter in the physical loc ation of the router.

56. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 53 IP Information • DNS Servers • IP Address • Gateway Statistics • Incoming Bytes • Outgoing Bytes • Load Balance score • Connection Uptime (secs)

78. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 75 • Local Port(s): The port number( s) that correspond s to the service (Web server, FTP, etc . ) on a local computer or device . For example, you might input “80” in the Local Port(s) fi eld to open a port for a Web server on a computer within your network. The Internet Port(s) field could then also be 80, or you could choose another port number that will be used across the Internet to access your Web server. If you choose a number other t han 80 for the Internet Port, connections to that number will be mapped to 80 — and therefore the Web server — within your network. • Protocol: Select from the following options in the dropdown menu: o TCP o UDP o TCP & UDP • Click Submit to save your completed port for warding rule.

126. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 123 7 INTERNET The Internet tab provides access to nine submenu items for managing a variety of Internet connection options . • Connection Manager • Client Data Usage • Data Usage • GRE Tunnels • Network Mobility (NEMO) • NHRP Interfaces • VPN Tunnels • WiFi as WAN / Bridge • WAN Affinity / Load Balancing

159. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 156 7.4 GRE Tunnels Generic Routing Encapsulation (GRE) tunnels can be used to create a connection between two private networks. The IBR600 /IBR650 is enabled for either GRE or VPN tunnels. GRE tunnels are simpler to configure and more flexible for different kinds of packet exchanges, but VPN tunnels are much more secure. In order to set up a tunnel you must know the following: • Local Network and Remote Network addresses for the “ Glue Network ,” the network that is created by the administrator that serves as the “glue” between the networks of the tunnel. Each address must be a different IP a ddress from the same private network , and these addresses together form the endpoints of the tunnel. • Remote Gateway , the public facing WAN IP address that the local gateway is going to connect to. • Optionally, you might also want to enable the tunnel Keep Alive feature to monitor the status of a tunnel and more accurately determine if the tunnel is alive or not. Click Add to configure a new GRE tunnel.

63. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 60 5.9 System Logs The router automatically logs (record s) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The log options allow you to filter the router logs so you can easil y find relevant messages. This router also has external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. Auto Update : The logs automatically refresh whenever the router creates a new messa ge. Update: Click to check for new router messages. Clear L og : Clear the log file. Save Log : This will open a dialog in your browser that will allow you to save the router's log to your computer. Search: Enter keywords to find specific events. Level: Selec t/Deselect from the following levels to filter messages by priority. • Critical • Error • Warning • Info NOTE : The logs are erased whenever the ro uter is rebooted or loses power.

64. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 61 5.10 VPN Tunnels View the status of configured VPN tunnels. To set up or edit a VPN tunnel , go to Internet → VPN Tunnels . Included information: • Name • Connections • Status • Protocols • Transferred • Direction • Time Online • Control

165. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 162 • Holding Time : Specifies the holding time for NHRP registration requests and resolution replies. • Shortcut - Destination : Reply with authoritative answers on NHRP resolution requests destined to addresses in this interface (instead of forwarding the packets). • Non - Caching : Disables caching of peer information from forwarded NHRP resolution reply packets. • Shortcut : Enable creation of shortcut routes. • Redirect : Enable sending of proprietary enterprise - style NHRP traffic indication packets.

90. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 87 6.7.2 OSPF Routing Protocol OSPF (Open Shortest Path First) version 2 is a routing protocol described in RFC2328, OSPF Version 2. OSPF is an IGP (Interior Gateway Protocol). Compared with RIP, OS PF can provide more scalable network support and faster convergence times. OSPF is widely used in large networks such as ISP (Internet Service Provider) backbone and enterprise networks. OSPF Editor • Name : Unique name of the policy. • Router ID : This sets the router - ID of the OSPF process. The router - ID may be an IP address of the router, but need not be – it can be any arbitrary 32bit number. However it MUST be unique within the entire OSPF domain to the OSPF speaker - bad things will happen if multiple O SPF speakers are configured with the same router - ID. • Authentication Key : This sets the router - ID of the OSPF process. The router - ID may be an IP address of the router, but need not be – it can be any arbitrary 32 - bit number. However it MUST be unique withi n the entire OSPF domain to the OSPF speaker – bad things will happen if multiple OSPF speakers are configured with the same router - ID. • Enabled : Click to enable/disable the policy. (Default: enabled.) Network Areas : Areas are identified by an ID number. As of 4.1.1, Cradlepoint only supports area 0 . Us e the IP address and netmask field s to associate a network with this policy. Also, choose whether to select Passive (active by default). Passive areas do not advertise.

137. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 134 6to4 Tun nel Out of the box, 6to4 is the simplest mode to enable full end - to - end IPv6 connectivity in an organization if the upstream ISP properly routes packets to and from the 6to4 unicast relay servers. • Primary IPv6 DNS Server – (optional) Depending on your prov ider, this may be required . This o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provider, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs . Example Configuration:

138. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 135 6in4 Tunnel The 6in4 tunnel mode utilizes explicit IPv4 tunnel endpoints and encapsulates IPv6 packets using 41 as the specified protocol type in the IP header. A 6in4 tunnel broker prov ides a static IPv4 server endpoint, decapsulates packets and provides routing for both egress and ingress IPv6 packets. Most tunnel brokers provide a facility to request delegated networks for use through the tunnel. • Primary IPv6 DNS Server – (optional) De pending on your provider, this may be required . This o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provider, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs . Example Configuration:

28. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 25 4.2 Getting Started – First Time Setup The First Time Setup Wizard will help you customize the name of your wireless network, change passwords to something you choose, and establish an optimal WiFi security mode. The Cradlepoint COR comes out of the box with a unique password at WPA1/WPA2 WiFi security level. 1) Open a br owser window and type “ cp/ ” or “ 192.168.0.1 ” into the address bar. Press enter/return. 2) When prompted for your password, type the eight character Default Password found on the pro duct label on t he bottom of the router (this is also the last eight digits of the router’s MAC address). 3) When you log in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD . (Otherwise, go to Getting Started → First Time Setup ). 4) Cradle point recommends that you change the router’s ADMINISTRATOR PASSWORD , which is used to log in to the administration p ages . The administrator password is separate from the WiFi security password, although initially the Default Password is used for both. 5) Y ou can select your TIME ZONE from a dropdown list . (This may be necessary to properly show time in your router log, but typically your router will automatically determine your time zone through your browser.) Click NEXT .

122. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 119 Download Priority: The priority value has two different effects on traffic. Higher priority traffic is handled before lower priority traffic, which can lead to shorter response times. Also, when spare bandwidth is available it is offered to higher priority queues first. Move the slider to select from the following options (Default: Norma l): • Lowest • Lower • Below Normal • Normal • Above Normal • High • Higher • Highest DSCP (DiffServ) Tag: Differentiated Services Code Point (DSCP) is the successor to TOS (Type of Service). Use this field to 'tag' the traffic by putting the value in the DSCP header of each IP packet that flows through this queue. Use the value of '0' to clear the existing DSCP value in the packet header. DSCP Tagging is sometimes used so that other networking equipment, upstream or post - NAT, can do traffic shaping based on the DSCP Tags as opposed to IP addresses or ports. This setting is optional. For more information see the Differentiated services Wikipedia page. Click Finish to save this queue.

142. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 139 Static (Manual): • IP v4 Address • Subnet Mask • Gateway IP • Primary DNS Server • Secondary DNS Server PPPoE: • Username • Password • Password Confirm • Service • Auth Type: None, PAP, CHAP

191. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 188 • PAP • CHAP Server Address : This can be either an IP address in the form of "1.2.3.4", or a DNS name in form of "host.domain.com". O nly lower case letters are allowed for a DNS name . Port : Port 49 is default for TACACS+. Shared Secret RADIUS RADIUS stands for “Remote Authentication Dial In User Service”. The router will use a RADIUS server (or two, optionally) to authorize administration. Server Timeout : If the servers are not reached within the set time (possibly because the WAN is down), the router will automatically fall back to using Local Users mode to prevent users from being locked out. Server Address : This can be either an IP address in the form of "1.2.3.4", or a DNS name in form of "host .domain.com". Only lower case letters are allowed for a DNS name. Port : Port 1812 is common for RADIUS servers. Shared Secret

45. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 42 o Security: WPA2/WPA1/WEP Personal/Enterprise or Open; Isolated Clients o Network: The name of the local network. To configure WiFi network settings see Network Settings → WiFi / Local Network s . 5.2.1 Router Alerts On the right side of the Dashboard page is a brief set of “ Router Alerts ” that state basic information such as whether the router is running properly. This will inform you about the availability of new firmware, for example. Router Alerts includes links to the System Software page (for new firmware) and the Connection Manager .

79. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 76 6.4.2 Network Prefix Translation (Advanced) Network Prefix Translation is used in IPv6 networks to translate one IPv6 prefix to another. IPv6 prefix translation is an experiment al specification ( RFC 6296 ) trying to achieve address independence similar to NAT in IPv4. Unlike NAT , however, NPT is stateless and preserves the IPv6 principle that each device has a routable public add ress . But it still breaks any protocol emb edding IPv6 addresses (e.g. IPsec ) and is generally not recommended for use by the IETF. NPT can help to keep internal network ranges consistent across various IPv6 providers, but it can not be used effectively in all situations. The primary purpose for Cradlepoint ’s NPT implementation is for failover/failback and load balancing setups. LAN clients can potentially retain the original IPv6 lease information and may experience a more seamless transition when WAN conn ectivity changes than if not utilizing NPT. Mode: • None – No translation is performed • Load Balance Only – (Default) Only translate networks when actively load balancing • First – Use the first IPv6 prefix found • Static – Always use a static IPv6 translation (input the prefix here) Transitioning from short pr efix to a longer prefix (such as from /48 to /64) is not without problems , as some of the LANs may lose IPv6 connectivity.

88. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 85 6.7 Routing Protocols A routing protocol is a protocol that specifies how routers communicate with each other, disseminating information that enables them to select routes between any two nodes on a computer network. Routing algorithms choose the route. Each router has a prior knowledge only of networks attached to it directly. A routing protocol shares this information first among immediate neighbors, and then throug hout the network. This way, routers gain knowledge of the topology of the network. Choose from the following tabs to configure routing protocols: • BGP Routing Protocol • OSPF Routing Protocol • RIP Routing Protocol • Route Maps and Filters 6.7.1 BGP Routing Protocol The latest version of BGP ( Border Gateway Protocol ) is version 4 . BGP - 4 is one of the Ex terior Gateway Protocols and de facto standard of Inter Domain routing protocol. BGP - 4 is described in RFC1771, A Border Gateway Protocol 4 (BGP - 4). BGP is a d istance vector routing protocol, and the AS - Path framework provides distance vector metric and loop detection to BGP. RFC1930. BGP Editor • Name : Unique name of the policy. • ASN : The AS (Autonomous System) number is one of the essential elements of BGP. • Rout er - ID : This sets the router - ID of the BGP process. The router - ID may be an IP address of the router, but need not be - it can be any arbitrary 32bit number. However it MUST be unique within the

89. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 86 entire BGP domain to the BGP speaker - bad things will happen if multiple BGP speakers are configured with the same router - ID. • Enabled : Click to enable/disable the policy. (Default: enabled.) Networks A ssociated with ASN : Use the IP address and netmask to assign networks to this ASN. Neighbor O ptions : Creates a new neighbor identified by remote ASN and IP address. Redistribute Routes : Redistribute routes of the specified protocol or kind into BGP, with the metric type and metric set if specified, filtering the routes using the given route map if specified. Redistributed routes may also be filtered with distribute lists. • Type : The type is the source of the route. Select from: Main, Connected, Static, RIP, OSPF. • Metric: Numerical priority of the route. • Route Map : Route maps provide a means to filter and/or app ly actions to routes, allowing policies to be applied to routes.

83. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 80 • FTP : To allow normal mode when using File Transfer Protocol. This is not needed for passive mode. This is enabled by default. • IRC : For Direct Client to Client (DCC) transfer when using Internet Relay Chat. You may wish to forward TCP port 113 for incoming identd (RFC 1413) requests. 6.4.6 Firewall Options (Advanced) Anti - Spoof: Anti - Spoof checks help protect against malicious users faking the source address in packets they transmit in order to either hide themselves or to impersonate someone else. Once the user has spoofed their address they can launch a network attack without revealing the true source of the attack or attempt to gain access to network services that are restricted to certain addresses . 6.4.7 Remote Administration Access Control (Advanced) Enable Remote Administration Access Control: Selecting this option allows you to make remote administration tools available to only the specified IP addresses. Access from all other IP addresses will be bl ocked. This option only filters IP addresses: you must enable Remote Management separately ( System Settings → Administration ). The services affected by this include remote HTTP, HTTPS, SNMP, and SSH configuration tools. This does not restrict access to LAN - based administration, i.e. devices within your network still have administration access. The individual remote administration services can be enabled under System Settings → Administration -- > Remote Management.

39. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 36 5 STATUS The Status tab displays information about many different aspects of t he router. It provides access to 11 submenu options: • Client List • Dashboard • GPS • GRE Tunnels • Hotspot Clients • Internet Connections • Routing • Statistics • System Logs • VPN Tunnels • WiPipe QoS

77. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 74 6.4 Firewall The router automatically provides a firewall. Unless you configure the router to the contrary, the router does no t respond to unsolicited incoming requests on any port, thereby making your LAN invisible to cyber attackers. However, some network applications cannot run with a tight firewall. Those applications need to selectively open ports in the firewall to functi on correctly. The options on this page control ways of opening the firewall to address the needs of specific types of applications. 6.4.1 Port Forwarding Rules A port forwarding rule allows traffic from the Internet to reach a computer on the inside of your netw ork. For example, a port forwarding rule might be used to run a Web server. Exercise caution when adding new rules as they impact the security of your network. Click Add to create a new port forwarding rule, or select an existing rule and click Edit . Add /Edit Port Forwarding Rule • Name: Name your rule. • Use Port Range: Changes the selection options to allow you to input a range of ports (if desired). • Internet Port(s): The port number(s) as you want it defined on the Internet. Typically these will be the same as the local port numbers, but they do not have to be. These numbers will be mapped to the local port numbers. • Local Computer: Select the IP address of an attached device from the dropdown menu, or manually input the IP address of a device.

87. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 84 6.6 Routing Add a new static route to the IP routing table or edit/remove an existing route. Static routes are unnecessary for most users. They are typically only used in networks with more than one layer, such as when there is a network within a network so that packet destinations are hidden behind an additional router . Adding a static route is a way of telling the router about an additional step that packets will need to take to reach their destination. Click Add to create a new static route. IP/Network Address: The IP a ddress of the target network or host . Netmask: The Netmask, along with the IP address, defines the network the computer belongs to and which other IP addresses the computer can see in the same LAN. An IP address of 192.168.0.1 along with a Netmask of 255.255.255.0 defines a network with 256 available IP addresses from 192.168.0. 0 to 192.168.0.255. NOTE: 255.255.255.255 is used to signify only the host that was entered in the IP/Network Address field. Gateway: Specifies the next hop to be taken if this route is used. A gateway of 0.0.0.0 implies there is no next hop, and the IP address matched is directly connected to the router on the interface specified: LAN or WAN . Allow Network Access : (Default: Deselected.) Some static routes will need an IP Filter Rule via the Fi rewall to allow packets through the route without being blocked. Selecting this option automatically creates this IP Filter Rule. If the IP/Network Address falls outside the LAN IP range, you probably need to select this option. Distribute: Allow this stat ic route to be distributed via a routing protocol ( Network Settings → Routing Protocols ).

160. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 157 Page 1: General Tunnel Name : Give the tunnel a name that uniquely identifies it. Tunnel Key : Enables an ID key for a GRE tunnel, which can be used as an identifier for mGRE (Multipoint GRE). Local Network : This is the local side of the “ Glue Network ,” a network created by the administrator to form the tunnel. The user creates the IP address inputted here. It must be different from the IP addresses of the networks it is gluing together. Choose any private IP address from the following three ranges that doesn’t match either network: • 10.0.0.0 - 10.2 55.255.255 • 172.16.0.0 - 172.31.255.255 • 192.168.0.0 - 192.168.255.255 Remote Network : This is the remote side of the “ Glue Network .” Again, the user must create an IP address that is distinct from the IP addresses of the networks that are being glued togeth er. The Remote Network and Local Network values wil l be flipped when inputted for the other side of the tunnel configuration. Subnet Mask : This is the subnet mask for the Glue Network. The Local and Remote Network addresses must fit with this mask. 255.255 .255.0 is a logical choice for most users. Remote Gateway : This is the public facing, WAN - side IP address of the network that the local gateway is going to connect to.

180. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 177 7.8.2 Saved Profiles This is a list of WiFi networks that have already been configured as WAN sources (or Bridge profiles). The router will attempt to connect to any of these access points using the password you have configured. If more than one access point is in range, then the router will connect with the highest priority network. Network: The name (SSID, or Service Set Identifier) that is broadcast by the access point. BSSID: The numeric ID of the network (Basic Service Set Identifier). This parameter is required when tryi ng to connect to a hidden network using WiFi as WAN. It is optional when connecting to a visible network. If it is set in a profile, both the SSID and BSSID must match to connect to an access point. If the BSSID is not set in a profile, then the router wil l connect to any access point that matches the given SSID. Auth Mode: The type of encryption that is used by the network. • None • WEP Auto • WEP Open • WEP Shared • WPA1 Personal • WPA2 Personal • WPA1 & WPA2 Personal 7.8.3 Site Survey This is a list of WiFi networks that the router can currently find, along with information about the network such as its mode and channel. If you click on a network in the Site Survey , you can import it as a saved profile. You can sort the list based on an y of the fields by clicking on the field name.

29. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 26 6) Cradlepoint recommends that you customize your WiFi Network Name. Type in your personalized Network name here. You can also enable the Guest Network feature (for more configuration options, see Network Settings → WiFi / Local Network s and the Wireless (WiFi) Netwo rk Settings section of this manual ). Choose the WIFI SECURITY MODE that best fits your needs: • BEST (WPA2): Select this option if your wireless adapters support WPA2 - only mode. This will connect to most new devices and is the most secure, but may not connect to older devices or some handheld devices such as a PSP. • GOOD (WPA1 & WPA2): Select this option if your wireless adapters support WPA or WPA2. This is the most compatible with modern devices and PCs. • POOR (WEP): Select this option if your wireless adapters only support WEP. This should only be used if a legacy device that only supports WEP will be connected to the router. WEP is insecure and obsolete and is only supported in the router for legacy reasons. The rou ter cannot use 802.11n modes if WEP is enabled; WiFi performance and range will be limited. • NONE (OPEN): Select this option if you do not want to activate any security features. Cradlepoint recommends BEST (WPA2) WiFi security. Try this option first and s witch only if you have a device that is incompatible with WPA2 .

38. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 35 4.6 IP Passthrough Setup You can quickly enable IP Passthrough with the IP Passthrough Setup Wizard available under Getting Started → IP Passthrough Setup . IP Passthrough takes a 3G/4G WAN data source and passes the IP address through to Ethernet LAN. Using this function requires many changes to your router configuration. The IP Passthrough Setup Wizard will automatically make these changes for you: simply read through the wizard and select Enable IP Passthrough on the second page. For further configuration options, see Network Settings → WiFi / Local Networks . Review the list of changes to ensure they are compatible with your router needs: • All Ethernet po rts will be set to LAN (i.e. , you cannot use Ethernet as an Internet source for your router). • All WAN devices will have Load Balance disabled and the highest priority device will be used. • All network groups except the primary network group will be removed. • All wireless interfaces will be removed from the primary network group. (It is possible to have a wireless interface associated with another network.) • All router - based VPN and GRE services will be disabled. • The Routing Mode will be set to IP Passthrough. • The Subnet Selection Mode will be set to "Automatically Create Subnet" Any Ethernet WAN connections should be disconnected before IP Passthrough is enabled.

69. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 66 6.1.2 Default Filter Settings Use Default Network Filter Settings together with Network WebFilter Rules to control website access. All of your networks are set to allow website access by default. Select a network and click Edit to change the default filter settings. Default Action : Select from the following dropdown options: • Allow Access (default) • Block Access When a network is set to Allow Access , it will allow access to sites not specifically blocked in the Web Filter Rules. When a network is set to Block Access , it will block access to sites not specifically allowed in the Web Filter Rules. Filter UR Ls by IP Address : (Default: No) Changing this option to “Yes” will cause the router to perform a DNS lookup on URL entries , and the IP addresses will be appended to the appropriate block/allow list. This can have the side effect of being very strict ; si tes that are hosted across many domains may need every domain added to the list for full functionality.

170. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 167 7.7.2 Page 2 - 3: Local and Remote Networks Local Network : T he Network Address and the Netm ask define what local devices have access to or can be accessed from the VPN tunnel. The router will automatically fill in the values for your network, but you can change the values to limit the tunnel to only some of the devices in your network. NOTE : The local network IP address must be different from the remote network IP address. Re mote Network : Enter the remote Gateway 's IP address or fully qualified domain name (my.domain.com). It is recommended you use a dynamic DNS host name instead of the static IP address. By using the dynamic DNS host name updates of the remote WAN IP are comp ensated for while connecting to a VPN tunnel. Enter the Network IP address with the Subnet Mask to define the remote network subnet that the local devices will have access to. NOTE : The remote network IP address must be different from the local network IP address.

188. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 185 8 SYSTEM SETTINGS The System Settings tab has 10 submenu options that provide access to tools for broad administrative control of the Cradlepoint COR : • Administration • Device Alerts • GPIO Connector • Enterprise Cloud Manager • Feature Licenses • Hotspot Services • Serial Redirector • SNMP Configuration • System Control • System Software

31. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 28 8) Configuring Failure Check : It is p ossible for a WAN interface to go down without the router recognizing the failure. (For example: the carrier for a cellular modem goes dormant, or your Ethernet connection is properly attached to a modem but the modem becomes disconnected from its Internet source.) Enable Failure Check to ensure that you can get out to the Internet via your primary WAN connection. This option is disabled by default because it may use data unnecessarily. Use this in combination with failover, or for cellular modems, use this in combination with Aggressive Reset ( Internet → Connection Manager under Modem Settings in the interface/rule editor). Idle Check Interval : Set the number of seconds the router will wait between checks to see if the WAN is still available. (Default: 30 seconds. Range: 10 - 3600 seconds.) Monitor while connected : Select from the dropdown menu. (Default: Off) • Active Ping: A ping request will be sent to the Ping Target. If no data is received, the ping request will be retried 4 times at 5 - second intervals. If still no data is received, the device will be disconnected and failover will occur. When “Active Ping” is selected, the next line gives an estimate of data usage in this form: “Active Ping could use as much as 9.3 MB of data per month.” This amount depend s on the Idle Check Interval. • Off: Once the link is established the router takes no action to verify that it is still up. Ping IP Address : If you selected “Active Ping”, you will need to input an IP address that will respond to a ping request. This IP addr ess must be an address that can be reached through your WAN connection (modem/Ethernet). Some ISPs/Carriers block certain addresses, so choose an address that all of your WAN connections can use. For best results, select an established public IP address. F or example, you might ping Google Public DNS at 8.8.8.8 or Level 3 Communications at 4.2.2.2. Click NEXT .

71. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 68 6.1.4 MAC Address Web Filter Defaults Use MAC Address Web Filter Defaults together with MAC Address WebFilter Rules to control website access for specific MAC addresses. By default, each MAC address is allowed website access. Cli ck Add/Edit to change this setting for a MAC address. Input the MAC address and default action you would like to apply to that MAC address. Default Action: Select from the following dropdown options: • Allow Access (default) • Block Access When a network is set to Allow Access , it will allow access to sites not specifically blocked in the Web Filter Rules. When a network is set to Block Access , it will block access to sites not specifically allowed in the Web Filter Rules.

82. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 79 6.4.4 DMZ: DeMilitarized Zone (Advanced) A DMZ host is effecti vely not firewalled in the sense that any computer on the Internet may attempt to remotely access network services at the DMZ IP address. Typical uses involve running a public Web server or sharing files. Input the IP Address of a single device in your net work to create a DeMilitarized Zone for that device. To ensure that the IP address of the selected device remains consistent, go to the “Reservations” section under Network Settings → DHCP Server and reserve the IP address for the device. As with port forw arding, use caution when enabling the DMZ feature as it can threaten the security of your network. Only use DMZ as a last resort. 6.4.5 Application Gateways (Advanced) Enabling an application gateway makes pinholes thru the firewall. This may be required for some applications to function, or for an application to improve functionality or add features. Exercise caution in enabling application gateways as they impact the security of your network. Enable any of the following types of application gateways: • PPTP : For virtual private network access using Point to Point Tunneling Protocol. This is enabled by default. • SIP : For Voice over IP using Session Initiation Protocol. • TFT P : Enables file transfer using Trivial File Transfer Protocol.

4. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 ` Table of Contents 1 INTRODUCTION ................................ ................................ 3 1.1 P ACKAGE C ONTENTS ................................ ............................. 3 1.2 S YSTEM R EQUIREMENTS ................................ ......................... 3 1.3 IBR600/IBR650 O VERVIEW ................................ ................. 3 2 HARDWARE OVERVIEW ................................ .................... 7 2.1 P ORTS , LED S , AND S WITCHES ................................ ................. 8 2.2 M OUNTING B RACKET ................................ .......................... 14 3 QUICK START ................................ ................................ .. 17 3.1 B ASIC S ETUP ................................ ................................ ...... 17 3.2 C ONNECT TO A C OMPUTER OR OTHER D EVICE .......................... 18 3.3 C OMMON P ROBLEMS ................................ .......................... 21 4 WEB INTERFACE – ESSENTIALS ................................ ........ 22 4.1 A DMINISTRATOR L OGIN ................................ ....................... 23 4.2 G ETTING S TARTED – F IRST T IME S ETUP ................................ ... 25 4.3 Q UICK L INKS ................................ ................................ ...... 30 4.4 C ONFIGURATION P AGES ................................ ....................... 32 4.5 E NTERPRISE C LOUD M ANAGER R EGISTRATION .......................... 34 4.6 IP P ASSTHROUGH S ETUP ................................ ...................... 35 5 STATUS ................................ ................................ ........... 36 5.1 C LIENT L IST ................................ ................................ ........ 37 5.2 D ASHBOARD ................................ ................................ ...... 39 5.3 GPS ................................ ................................ ................. 43 5.4 GRE T UNNELS ................................ ................................ ... 44 5.5 H OTSPOT C LIENTS (IBR600) ................................ ................ 45 5.6 I NTERNET C ONNECTIONS ................................ ...................... 46 5.7 R OUTING ................................ ................................ .......... 56 5.8 S TATISTICS ................................ ................................ ......... 57 5.9 S YSTEM L OGS ................................ ................................ ..... 60 5.10 VPN T UNNELS ................................ ................................ . 61 5.11 W I P IPE Q O S ................................ ................................ ... 62 6 NETWORK SETTINGS ................................ ....................... 63 6.1 C ONTENT F ILTERING ................................ ............................ 64 6.2 DHCP S ERVER ................................ ................................ ... 70 6.3 DNS ................................ ................................ ................ 71 6.4 F IREWALL ................................ ................................ .......... 74 6.5 MAC F ILTER / L OGGING ................................ ...................... 82 6.6 R OUTING ................................ ................................ .......... 84 6.7 R OUTING P ROTOCOLS ................................ .......................... 85 6.8 W I F I / L OCAL N ETWORKS ................................ .................... 92 6.9 W I P IPE Q O S ................................ ................................ ... 116 7 INTERNET ................................ ................................ ...... 123 7.1 C ONNECTION M ANAGER ................................ .................... 124 7.2 C LIENT D ATA U SAGE ................................ ......................... 151 7.3 D ATA U SAGE ................................ ................................ ... 152 7.4 GRE T UNNELS ................................ ................................ . 156 7.5 N ETWORK M OBILITY (NEMO) ................................ ........... 159

76. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 73 User name : Enter the user name or key provided by the Dynamic DNS service provider. If the Dynamic DNS provider supplies only a key, enter that key for both the User nam e and Password fields . Password: Enter the password or key provided by the Dynamic DNS service provider. 6.3.3 Advanced Dynamic DNS Settings Update period (hours) . (Default: 576) The time between periodic updates to the Dynamic DNS, if your dynamic IP address has not changed. The timeout perio d is entered in hours so valid values are from 1 to 8760. Override External IP. The external IP is usually configured automatically during connection. However, in situations where the unit is within a private network behind a firewall or router, the networ k's external IP address will have to be manually configured in this field. You may find out what your external IP address is by going to http://myip.dnsomatic.com/ in a web browser. 6.3.4 Known Hosts Configuration The Known Hosts Configuration feature allows you to map a name (printer, scanner, laptop, etc.) to an IP address of a device on the network. This assigns a new hostname that can be used to conveniently identify a device within the network, such as an office pr inter. Click Add to name a device in your network. Fill in the following fields: • Hostname: Choose a name that is meaningful to you. No spaces are allowed in this field. • IP address: The address of the device within your network. EXAMPLE: a personal laptop with IP address 192.168.0.164 could be assigned the name “MyLaptop”. Since the assigned name is mapped to an IP address, the device’s IP address should not change. To ensure that the device keeps the same IP address, go to Network Settin gs → DHCP Server and reserv e the IP address for the device by selecting the device in the Active Leases list and clicking “Reserve”.

189. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 186 8.1 Administration Select the Administration submenu item in order to control any of the following functions: • Router Security • System Clock • Local Management • Remote Management • GPS • SMS • System Logging • Router Services 8.1.1 Router Security Advanced Security Mode: When the router is configured to use the advanced security mode, several aspects of the router’s configuration and networking functionality will be extended to support high security environments. This includes support for m ultiple user accounts, increased password security, and additional network spoofing filters. If you plan to use your router in a PCI DSS compliant environment this option is mandatory. See below for more details. Admin Password: Enter a password for the ad ministrator who will have full access to the router's management interface. You can use the default password on the back of your product, or you can create a custom Administrator Password.

35. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 32 4.4 Configuration Pages The following table shows the navigation layout of the administration pages. Click on the tabs along the top bar to reveal the following dropdown menus. ( Items particular to WiFi are not available on the IBR650. ) Getting Started Status Network Settings Internet System Settings Enterprise Cloud Manager Registration First Time Setup IP Passthrough Setup WiFi Protected Setup Client List Dashboard GPS GRE Tunnels Hotspot Clients Internet Connections Routing Statistics System Logs VPN Tunnels WiPipe QoS Content Filtering DHCP Server DNS Firewall MAC Filter / Logging Routing Routing Protocols WiFi / Local Networks WiPipe QoS Connection Manager Client Data Usage Data Usage GRE Tunnels Network Mobility (NEMO) NHRP Interfaces VPN Tunnels WiFi as WAN / Bridge WAN Affinity / Load Balancing Administration Device Alerts GPIO Connector Enterprise Cloud Manager Feature Licenses Hotspot Services Serial Redirector SNMP Configuration System Control System Software Status – Displays various types of information about your router such as a list of clients that are attached to your networks ( Client List ), the details of each Internet source your router is using ( Internet Connections ), and a map of your router’s location ( GPS ). Very few changes can be made from this tab because the primary purpose is to display information. Network Settings – Provides configuration options for the networks, or LAN, created by your router. For example, you can enable a guest WiFi network ( WiFi / Local Networks ), set up rules to filter webs ites ( Content Filtering ), or create a traffic - shaping rule to set bandwidth priorities ( WiPipe QoS ).

91. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 88 Redistribute Routes : Redistribute routes of the specified protocol or kind into BGP, with the metric type and metric set ( if specified ) , filtering t he routes using the given route map ( if specified ) . Redistributed routes may also be filtered with distribute lists. • Type : The type is the source of the route. Select from: Main, Connected, Static, RIP, OSPF. • Metric: Numerical priority of the route. • Route Map : Route maps provide a means to filter and/or apply actions to routes, allowing policies to be applied to routes. 6.7.3 RIP Rout ing Protocol RIP (Routing Information Protocol) is a widely deployed interior gateway protocol. RIP is a distance - vector protocol based on the Bellman - Ford algorithms. As a distance - vector protocol, RIP send s updates from one router to its neighbors period ically , allowing the convergence to a known topology. In each update, the distance to any g iven network will be broadcast to its neighboring router. The router supports RIP version 2 as described in RFC2453 and RIP version 1 as described in RFC1058. RIP Editor • Name : Unique name of the policy. • Metric : RIP metric is a value for distance for the network. Usually RIP increments the metric when the network information is received. The metric for redistributed routes is set to 1. • Protocol Version : RIP can b e configured to send either Version 1 or Version 2 packets. The default is to send RIPv2 while accepting both RIPv1 and

171. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 168 7.7.3 Page 3: IKE Phase 1 IKE security has two phases, Phase 1 and Phase 2. You have the ability to distinctly configure each phase, but the default settings will be sufficient for most users. To set up a tunnel with a remote site, you need to match your tunnel's IKE negotiation parameters with the remote site. By selecting several encryption, hash, and DH group options, you improve your chances for a successful tunnel negotiation. For greatest compatibility, select all options; for greatest sec urity, select only the most secure options that your devices support. Exchange Mode : The IKE protocol has 2 modes of negotiating phase 1 - Main (also called Identity Protection) and Aggressive . • In Main m ode, IKE separates the key information from the ide ntities , allowing for the identities of peers to be secure at the expe nse of extra packet exchanges. • In Aggressive m ode, IKE tries to combine as much information into fewer packets while maintaining security. Aggressive mode is slightly faster but less secure. Because it has better security, Main mode is recommended for most users. Key Lifetime : The lifetime of the generated keys of Phase 1 of t he IPs ec negotiation from IKE. After the time has expired, IKE wi ll r enegotiate a new set of Phase 1 keys. Encryption, Hash, and DH Groups : Each I KE exchange uses one encryption algorithm , one hash function , and one DH group to make a secure exchange.

213. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 210 8.4 Enterprise Cloud Manager Cradlepoint ECM is a cloud - based management se rvice for configuring, monitoring , and organizing your Cradlepoint routers. Key features include: • Group based configuration management • Health monitoring of router connectivity and data usage • Remote management and control of routers • Historical record keepin g of device logs and status Visit http:// Cradlepoint .com/ecm to learn more about Cradlepoint ECM . If you do not have ECM credentials, sign up at: http://www. C radlepoint .com/ecm - signup . Registering Your Router Once you have signed up for ECM, click on the Register Router button to begin managing the router through ECM. Input your ECM Username and ECM Password and click Register . You have now registered the device with Enterprise Cloud Manager. Suspend ing the ECM Client Click on the Suspend Client button to stop communication between the device and ECM. Suspending the client will make it stop any current activity and go dormant. It will not attempt to contact the server while suspended. This is a temporary setting that will not survive a router reboot; to disable the client altogether use the A dvanced Enterprise Cloud Manager Settings panel ( below ) .

75. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 72 Force All DNS Requests To Router: Enabling this will redirect all DNS requests from LAN clients to the router's DNS server. This will allow the r outer even more control over IP addresses even when clients have their own DNS servers statically set. 6.3.2 Dyn amic DNS Configuration The Dynamic DNS feature allows you to host a server (Web, FTP , etc.) using a domain name that you have purchased (www.yourname. com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. When you use a Dynamic DNS service provider, you can enter your host name to connect to your server, no matter what your IP ad dress is. Enable Dyn amic DNS Service: Enable this option only if you have purchased your own domain name and registered with a Dynamic DNS service provider. Server Type . Select a Dynamic DNS service pr ovider from the pull - down list: • www.DynDNS.org • www.DNSomatic.com • www.ChangeIP.com • www.NO - IP.com • Custom Server (DynDNS clone) Custom Server Address . Only available if you select Custom Serv er from the Server Address dropdown list . Enter your custom dynamic DNS server address here. The server must suppor t the Dyn amic DNS protocol. See www.dyndns.org for details. Example: myserver.mydomain.net . Use HTTPS: Use the more secure HTTPS protocol. This is recommended, but could be disabled if not compatible with the server. Host n ame: Enter your host name, f ully qualifi ed. F or example: myhost.mydomain.net .

121. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 118 Upload Priority: The priority value has two different effe cts on traffic. Higher priority traffic is handled before lower priority traffic, which can lead to shorter response times. Also, when spare bandwidth is available it is offered to higher priority queues first. Move the slider to select from the following options (Default: Normal): • Lowest • Lower • Below Normal • Normal • Above Normal • High • Higher • Highest Click Next to continue to the next page. Download Bandwidth Enable Download QoS: ( Default: Enabled.) Deselect if you want your rule to apply to upload traffic only. Leave this selected to include download restrictions with this queue. Borrow Spare Bandwidth: ( Default: Enabled.) When this is enabled, the interfaces/protocols associated w ith this rule will borrow unused bandwidth from other rules. Disabling borrowing will restrict the traffic to the specified bandwidth. Higher priority queues will be offered excess bandwidth first. Download Bandwidth: Th is is the percentage of the connect ed WAN upload bandwidth that will be reserved for the specified traffic. The maximum value is adjusted to the remaining percentage after other queues receive their share.

135. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 132 Auto IPv6 auto - configuration mode us es DHCPv6 and/or SLAAC to configure the IPv6 networks. When you select Auto , all of the following settings are optional (depending on your provider’s requirements) : • PD Request Size – Prefix Delegation request size. This is the size of IPv6 network that wil l be requested from the ISP to delegate to LAN networks. (Default: 63) • Primary IPv6 DNS Server – (optional) Depending on your provider, this may be required . This o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provider, this may be required . Prefixes specified here only take effect if those suppl ied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs . Example Configuration:

157. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 154 bandwidth. This is a best effort to keep all interfaces with t hese rules at a similar percentage utilization of data (e.g. 10%, 50%, 90%) as the cycle progresses, rather than quickly using 100% of a fast 1GB capped interface while using only a fraction of a slow 10GB capped interface, thus leaving the rest of the cyc le with only the slow interface. The Data Usage algorithm on the Load Balancing page must be selected or this checkbox has no effect. Click Next to continue to page 2. Data Usage Rule – page 2 Cycle Type: How often the rule will reset. The data usage am ount will be reset at the end of each cycle. Select the length of a cycle from a dropdown menu with the following choices: • Daily • Weekly • Monthly Cycle Start Date: Select the date you wish the rule to begin. This date will be used to track when the rule will be reset. Shutdown WAN on Cap: If selected , the WAN device will shut down when the assigned usage is reached. A cycle reset or a rule deletion will re - enable th e device. Send Alert on Cap: An email alert will be generated and sent when the assigned usage is reached. WARNING: The SMTP mail server must be configured in System Settings → Device Alerts . Custom Alert: When checked you enable a second email to be conf igured for a percentage of the assigned usage. Percent of Usage (1 - 1000): If selected, a custom alert will be sent when your data usage reaches this percentage of your usage cap. For example, you could set this at 90 percent so that you know when your usag e is nearing 100 percent of the cap.

169. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 166 o LTE o Ethernet o Wireless As WAN • Serial Number : Select from a dropdown list of attached devices. • MAC Address : Select from a dropdown list of attached devices. • Unique ID : Select from a dropdown list of attached devices. If you intend to have multiple WAN devices connected simultaneously, with either Load Balancing or more likely WAN Affinity, then you may consider using the Invert WAN Binding option which will i nvert the expression to only establish the VPN tunnel when the specified WAN Binding devices are NOT connected. Invert WAN Binding : Advanced option that inverts the meaning of WAN Binding to only establish this tunnel when the specified WAN Binding device( s) are NOT connected. This is typically useful when the VPN tunnel is being used as a hot - spare on a router with multiple active WAN connections and the VPN tunnel is only needed in the absence or unavailabil ity of a particular WAN device (an MPLS - based WA N device for example ) .

178. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 175 7.8 WiFi as WAN / Bridge (IBR600) WiFi as WAN uses another WiFi network as its Internet source and then rebroadcasts its own local network. For example, the IBR600 can create a private LAN using the public WiFi from a hotel as its WAN. WiFi Bridge functions similarly, but it rebroadcasts the or iginal network. In other words, the router passes on the same settings and addresses already set up by the original NAT. The WiFi as WAN and WiFi Bridge features cannot both be used at the same time. When either WiFi as WAN or WiFi Bridge is enabled, the IBR600 will find other WiFi networks that you can select and connect to. Unless a selected WiFi source is on an unprotected network, you will need to know its password or key. All Cradlepoint routers and some other routers use the same default IP address for the primary network, 192.168.0.1. If you attempt to set up WiFi as WAN and there is an “IP conflict,” you need to change the IP address. The router is attempting to use the same IP address for both WAN and LAN, which is impossible. Go to Network Se tti ngs → WiFi / Local Networks. Select the network and click Edit . You can change the IP address under IP Settings . For example, you might change 192.168. 0 .1 to 192.168. 1 .1.

74. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 71 6.3 DNS DNS, or Domain Name System, is a naming system that translates between domain names ( www. Cradlepoint .com , for example) and Internet IP addresses ( 206.207.82.197 ) . A DNS server act s as an Internet phone book, translating between names that make sense to people and the more complex numerical identifiers . The DNS page for the IB R600/IBR650 has these distinct functions: • DNS Settings : By default y ou r rout er is set to automatically acquire DNS s erver s through your Internet provider (Automatic) . DNS Settings allows you to specify DNS s erver s of your choosing instead (Static) . • Dynamic DNS Configuration: Allows you to host a server (Web, FTP, etc.) using a domain name that you have purchased (www.yourname.com) with your dynamically assigned IP address. • Known Hosts Configuration: Allows you to map a name (printer, scanner, laptop, etc.) to an IP address of a device on the network. 6.3.1 DNS Settings You have the op tion to choose specific DNS server s for your network instead of using the DNS server s assigned by your Internet provider. The default DNS server s are usually adequate . You may want t o assign DNS servers if the default DNS servers are performing poorly, if you want Wi Fi clients to access DNS servers that you use for customized addressing , or if you have a local DNS server on your network. Automatic Config: Automatic or Static (default : Automatic). Switching to “Static” enables you to set specific DNS servers in the Primary DNS and Secondary DNS fields. Primary DNS and Secondary DNS : If you choose to specify your DNS s ervers, then enter the IP address es of the serve rs you want as your primary and secondary DNS s erver s in the s e field s . The DNS server settings will be pre - populated with public DNS server IP addresses. You can override the IP address with any other DNS server IP address of your choice. For example, Google Public DNS server s have the IP addresses 8.8.8.8 and 8.8.4.4 while 4.2.2.2 and 4.2.2.3 are servers from Level 3 Communications.

92. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 89 RIPv2 (and replying with packets of the appropriate version for REQUESTS / triggered updates). • Password : RIPv2 allows packets to be auth enticated via either an insecure plain text password, included with the packet, or a more secure MD5 based HMAC (keyed - Hashing for Message AuthentiCation). RIPv1 cannot be authenticated at all, so when authentication is configured RIP will discard routing updates received via RIPv1 packets. • Enabled : Click to enable/disable the policy. (Default: enabled.) Networks : Set the RIP - enabled interfaces by network. RIP is enabled on the interfaces that have addresses within the network range. Neighbors : When a neig hbor doesn't understand multicast, this command is used to specify neighbors. In some cases, not all routers will be able to understand multicasting, where packets are sent to a network or a group of addresses. In a situation where a neighbor cannot proces s multicast packets, it is necessary to establish a direct link between routers. The neighbor command allows the network administrator to specify a router as a RIP neighbor. The no neighbor a.b.c.d command will disable the RIP neighbor. Assign a neighbor b y inputting an IP address. Redistribute Routes : Redistribute routes of the specified protocol or kind into BGP, with the metric type and metric set (if specified), filtering the routes using the given route map (if specified). Redistributed routes may als o be filtered with distribute lists. • Type : The type is the source of the route. Select from: Main, Connected, Static, RIP, OSPF. • Metric: Numerical priority of the route. • Route Map : Route maps provide a means to filter and/or apply actions to routes, allowing policies to be applied to routes.

125. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 122 Use ports and/or IP addresses to define the type(s) of traffic attached to this rule. Leaving any field blank will match all values; all fields are optional. Source Port(s) and/or Destination Port(s): Enter a port number between 1 and 65535. To enter a single port number, input the number into the left box. To enter a range of ports, fill in both boxes separated by the colon. For example "80:90" would represent all ports between 80 and 90 including 80 and 90 themselves. Source IP Address , Source Netmask , Destination IP Address , and Destination Netmask: Specify an IP address or range of IP addresses by combining an IP address with a netmask for either “source” or “destination” (or both). Source vs. destination is defined by traffic flow. Leave these blank to include all IP addresses (such as if your rule is defined by a particula r port instead). E XAMPLE: If you want to associate this rule with your guest LAN, you could input the IP address and netmask for the guest LAN here (leaving the last slot “0” to allow for any user attached to the guest network): • Source IP Address: 192.168 .10.0 • Source Netmask: 255.255.255.0 DSCP (DiffServ): Differentiated Services Code Point (DSCP) is the successor to TOS (Type of Service). Use this field to select traffic based on the DSCP header in each IP packet. This field is sometimes set by latency se nsitive equipment such as VoIP phones. This setting is optional. For more information see the Differentiated services Wikipedia page. DSCP Negate: When checked this rule will match on any packet that does not match the DSCP field. Click Finish to save this rule.

141. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 138 7.1.6 Ethernet Settings While default settings for each WAN Ethernet port will be sufficient in most circumstances, you have the ability to control: • Connect Method: DHCP (Automatic), Static (M anual), or PPPoE (Point - to - Point Protocol over Ethernet). • MAC Address: You have the ability to change the MAC address, but typically this is unnecessary. You can match this address with your device’s address by clicking: “ Clone Your PC’s MAC Address ”. Connect Method Select the connection type that you need for this WAN connection. You may need to check with your ISP or system administrator for this information. • DHCP (Dynamic Host Configuration Protocol) is the most common configuration. Your router’s E thernet ports are automatically configured for DHCP connection. DHCP automatically assigns dynamic IP addresses to devices in your networks. This is preferable in most circumstances. • Static allows you to input a specific IP address for your WAN connection; this should be provided by the ISP ( if supported ) . • PPPoE should be configured with the username, password and other settings provided by your ISP. If you want to use a Static (Manual) or PPPoE connection, you will need to fill out additional information .

143. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 140 7.1.7 Modem Settings Not all modems will have all of the options shown below ; the available options are specific to the modem type. On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Internet is made as needed. When this mode is not selected a connection to the Int ernet is always maintained. Aggressive Reset: When Aggressive Reset is enabled the system will attempt to maintain a good modem connection. If the Internet has been unreachable for a period of time , a reset of the modem will occur in attempt to re - establis h the connection. Network - Initiated Alerts : This field controls whether the Sprint network can disconnect the modem to apply updates, such as for PRL, modem firmware, or configuration events. These activities do not change any router settings, but the m odem connection may be unavailable for periods of time while these updates occur. The modem may also require a reset after a modem firmware update is complete. • Disabled: The request to update will be refused. • When Disconnected: The request to update will only be performed when the modem is either in a disconnected state or dormant state. If the modem is not in one of these states when the request is received, then the router will remember the request and perform the update when the modem becomes disconnected/dormant. • On Schedule: The request to update will only be performed at the specified scheduled time, no matter what the state of the modem is. Network - Initiated Schedule: When you select “ On Schedule ” for Network - Initiate d Alerts , you also select a time from this dropdown list. Modem updates will take place at this scheduled time.

183. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 180 7.9 WAN Affinity / Load Balancing Load Balance Select the Load Balance Algorithm from the following dropdown options: • Round - Robin: Evenly distribute each session to the available WAN connections. • Rate: Distribute load based on the current upload and download rates. A WAN device's upload and download b andwidt h values can be set in Internet → Connection Manager . • Spillover: This was the default algorithm in older ( version 3 ) firmware. Load is always given to devices with the most available bandwidth. The estimated bandwidth rate is based on a combination of the upload and download configuration values and the observed capabilities of the device. • Data Usage: This mode works in concert with the Data Usage feature ( Internet → Data Usage ) . The router will make a best effort to keep data usage between interfaces at a similar percentage of the assigned data cap in the Data Usage rule for each interface, rather than distributing sessions based solely on bandwidth. For proper function you need to create data usage rules for each WAN device you will be load balancing. Make certain to select the "Use with Load Balancing" checkbox in the Data Usage rule editor. WAN Affinity WAN Affinity rules allow you to manage traffic in your network so that particular bandwidth uses are associated with particular WAN sources. This allows you to prioritize bandwidth. EXAMPLE: You could specify that your guest LAN is only associated with your Ethernet connection with no failover. Then if you r Ethernet conn ection goes down and the embedded modem connects for failover for your primary LAN, yo ur guest LAN will not take bandwidth from your primary LAN, saving you money. Click “Add” to open the WAN Affinity Policy Editor and create a new WAN Affinity rule. Name: Give a name for your rule that is meaningful to you.

130. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 127 Failure Check (Advanced) If this is enabled, the router will check that the highest priority active WAN interface can get to the Internet even if t he WAN connection is not actively being used. If the interface goes down, the router will switch to the next highest priority interface available. If this is not selected, the router will still failover to the next highest priority interface but only after the user has attempted to get out to the Internet and failed. Idle Check Interval: The amount of time between each check. (Default: 30 seconds. Range: 10 - 3600 seconds.) Monitor while connected: (Default: Off) Select from the following dropdown options: • Passive DNS (modem only): The router will take no action until data is detected that is destined for the WAN. When this data is detected, the data will be sent and the router will check for received data for two seconds. If no data is received the router b ehaves as described below under Active DNS . • Active DNS (modem only): A DNS request will be sent to the DNS servers. If no data is received, the DNS request will be retried four times at five - second intervals. (The first two requests will be directed at the Primary DNS server and the second two requests will be directed at the Secondary DNS server.) If still no data is received, the device will be disconnected and failover will occur. • Active Ping: A ping request will be sent to the Ping Target. If no data is received, the ping request will be retried four times at five - second intervals. If still no data is received, the device will be disconnected and failover will occur. When “Active Ping” is selected, the next line gives an estimate of data usage in this fo rm: “Active Ping could use as much as 9.3 MB of data per month.” This amount depends on the Idle Check Interval. • Off: Once the link is established the router takes no action to verify that it is still up. Ping IP Address : If you selected “Active Ping”, you will need to input an IP address. This must be an address that can be reached through your WAN connection (modem/Ethernet). Some ISPs/Carriers block certain addresses, so choose an address that all of your WAN connections can use. For best results, select an established public IP address. For example, you might ping Google Public DNS at 8.8.8.8 or Level 3 Communications at 4.2.2.2.

149. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 146 7.1.10 SIM/APN /Auth Settings SIM PIN : PIN number for a GSM modem with a locked SIM. Authentication Protocol : Set this only if your service provider requires a specific protocol and the Auto option chooses the wrong one. Choose from Auto , PAP , and CHAP and then input your username and password. Access Point Configuration: Some wireless carriers provide multiple Access Point configurations that a modem can connect to. Some APN examples are ‘isp.cingular” and “vpn.com”. • Default : Let the router choose an APN automatically. • Manual : Enter an APN by hand. • Select: This opens a table with 16 slots for APNs, each of which can be set as IP, IPV4V6, or IPV6. The default APN is marked with an asterisk (*). You can change the APN names, select a different APN, etc. For Verizon modems, only the third slot is editable. Changes made here are written to the modem, so a factory reset of the router will not impact these settings.

150. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 147 7.1.11 Update/Activate a Modem Some modems can be updated and activated while plugged into the router. Updates and activation methods vary by modem model and service provider. Possible methods are: PRL Update, Activation, and FUMO. All supported methods will be displayed when you select your modem and click “Control” to open the “Update/Activate” window . If no methods are displayed for your device then you will need to update and activate your device externally. To update or activate a modem, select the device and click “Control”. The modem does n ot support Update/Activate methods : A message will state that there is no support for PRL Update, Activation, or FUMO. The modem supports Update/Activate methods : A message will display showing options for each supported method: • Modem Activation / Up date : Activate, Reactivate, or Upgrade Configuration. • Preferred Roaming List (PRL) Update • Firmware Update Management Object (FUMO) Click the appropriate icon to start the process. If the modem is connected when you start an operation the router will automa tically disconnect it. The router ma y start another modem as a fail over measure. When the operation is done the modem will go back to an idle state, at which point the router m ay restart it depending on failover and failback settings. NOTE: Only one operation is supported at a time. If you try to start the same operation on the same modem twice the UI will not report failure and the request will finish normally when the original request is done. However if you try to start a different o peration or use a different modem , this second request will fail without interfering with the pending operation.

118. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 115 Wireless Mode: Select the WiFi clients the router will be compatible with. Greater compatibility is a tradeoff with better performance. For greatest compatibility with all WiFi devices, selec t "802.11 b/g/n". For best performance, connect with only other 802.11n - compatible devices and select "802.11 n." • 802.11 b • 802.11 b/g • 802.11 b/g/n • 802.11 n Channel Width: Selects whether the router uses a single 20 MHz channel to send/receive, or uses two adjacent 20 MHz channels to create a 40 MHz channel. Higher performance is possible with the 40 MHz channel. Selecting Auto i s generally best. Enabling WiFi as WAN will force 20 MHz only mode. Extended Channel: When operating in 40 M H z mode the access point will use an extended channel either below or above the current channel. Optimal selection will depend on the channels of other networks in the area. MCS: 802.11n uses multiple Modulation Coding Schemes to enable higher throughput in various environme nts. Since clients can dynamically change rates depending on environment , selecting Auto is generally best. Short GI: Short GI is an optimization for shortening the interval between transmissions. May be incompatible with older clients. Greenfield Mode: Gr eenfield mode uses an 802.11n - only preamble to transmit packets that older wireless clients cannot interpret. Use of g reenfield mode in a mixed 802.11 environment may result in degraded performance but can improve performance if all devices in the area are 802.11n compatible. R ADIUS Timeout: (Default: 3600 seconds) When using an Enterprise security mode clients will be forced to re - authenticate with the RADIUS server at this interval in seconds. This allows administrators to revoke access so when an attache d client’s authenti cation expires, the client must re - authenticate. R ADIUS Retry: (Default: 60 seconds) When using an Enterprise security mode, if a RADIUS query fails to receive a response from the server it will delay by this interval (in seconds) before attempting another query. This helps protect the network from floods of authentication requests if the RADIUS server is temporarily unreachable.

136. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 133 Static As with IPv4, static configuration is available for situations where the WAN IPv6 topology is fixed. • IPv6 Address/CIDR – Input the IPv6 static IP address and mask length provided by your ISP (see http://en.wikipedia.org/wiki/Classless_Inter - Domain_Routing for a n explanation of CIDR) . • IPv6 Gateway IP – Input the IPv6 remote gateway IP address provided by your ISP . • Primary IPv6 DNS Server – (optional) Depending on your provider /setup , this may be required . This o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provid er, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs . Example Configuration:

93. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 90 6.7.4 Route Maps and Filters Access Lists This option provide s for basic filtering based on IP addresses and netmasks. Click Add to create a filtering rule. Name: Choose a unique name. Allow: Select “Permit” or “Deny”. IP Address: Input the IP addresses that you want permitted or denied . Netmask: Use this along with “IP Address” to specify a range of IP Addresses associated with this Access Lists rule Route Map Route maps provide a means to filter and/or apply actions to route s , allowing policies to be applied to routes . Route maps define rules for transferring between different routing protocols. Each statement in a route map is ordered. Once there is a match to a statement, the statement is executed and the sc an terminates. Click Add to create a new route map. • Name: Choose a unique name. • Allow: Select “Permit” or “Deny”. • Order : Input a number to set the order of this policy.

201. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 198 How to Send an SMS Message You can send SMS messages to the router via phone or email. The key elements are : 1. the modem’s MDN 2. the SMS password ( defined above) 3. the comman d You must know the MDN ( Mobile Directory Number ) of the modem to send SMS messages to the router . This is a phone number that can be found under Status → Internet Connections in the router administration pages (or under Devices → Network Interfaces in Enterprise Cloud Manager). How to Text from a Phone 1. Open the text messaging tool on your phone and start a new message. 2. In the To field, enter the modem’s MDN. 3. In the Subject field, enter the SMS password and command. 4. Click Send . How to Text from an Email NOTE: There are limitations with sending texts via email. The SMS engine is currently only compatible with GSM - based carrier operators . 1. Start a new email message. 2. In the To field, enter the modem ’s MDN plus the modem’s carrier domain name (e.g., 2085555555 @txt.att.net ). 3. Enter the password and command in either the S ubject field or B ody of the email message. If you use the s ubject fie ld, leave the body blank, and i f you use the body, leave the subject blank. NOTE: The s ubject field may be limited to a cer tain number of characters, so if you get an error w hen sending the command on the s ubject line, switch to using the body instead. )

212. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 209 Input Pin – The Input Pin can be used to read a value — either high or low — from an external device an d either display that value on this administration page (as the Current Value) or cause the router to reset. Select one of the following options from the dropdown menu: • Default/Ignored: In this mode the input pin is not used. • Input Sensing: In this mode the logic state (high or low) is automatically sensed by the router and is readable as the Current Value. • Router Reset: In this mode an external device can reset the router by holding the input low for 10 - seconds. Output Pin – The Output Pin can be used to allow an external device to read either whether the router is running or whether the modem is connected. Select one of the following options from the dropdown menu: • Default/Low: In this mode the output pin is not used and is at 0V (ground po tential). • Set High /Router Running : In the s e mode s the output pin is logic low while the router is booting and transitions to logic high when the router is fully running. If the router is reset, the output returns to low until the router has fully rebooted. • Modem Connected: In this mode the output pin is logic low until the modem has connected to a tower. If the connection drops, this output is set low until the connection is restored.

58. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 55 5.6.6 WiFi as WAN Diagnostics • Connection State (connected, idle, etc.) General Information • Product Wireless As WAN • Unique Identifier • Type wwan IP Information • Netmask • IP Address • Gateway

209. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 206 8.2.1 SMT P Mail Server Since the IBR600/IBR650 does not have its own email server, to receive alerts yo u must enable an SMTP server. This is possible through most email services (Gmail, Yahoo, etc. ) . Each SMTP server will have different specifications for setup, so you have to look those up separately . The following is an example using Gmail: • Server Addr ess: smtp.gmail.com • Server Port: 587 ( for TLS, or Transport Layer Security port ; the IBR600/IBR650 does not support SSL ) . • Authentication Required: For Gmail, mark this checkbox. • User Name: Your full email address • Password: Your Gmail password • From Address: Your email address • To Address: Your email address Once you have filled in the information for the SMTP server, click on the “Verify SMTP Settings” button. You shou ld receive a test email at your account.

194. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 191 8.1.4 Remote Management Allows a user to enable incoming WAN pings or to change settings for the router from the Internet using the router's Internet address. Allow WAN pings: When enabled the funct ionality allows an external WAN client to ping the router. Allow Remote Web Administration: When remote administration is enabled it allows access to these administration web pages from the Internet. With it disabled, you must be a client on the local netw ork to access the administration website. For security, remote access is usually done via a non - standard http port. Additionally, encrypted connections can be required for an added level of security. • Require HTTPS Connection: Requiring a secure ( https ) co nnection is recommended. • HTTP Port: Default: 8080. This option is disabled if you select “Require Secure Connection”. • Secure HTTPS Port: Default: 8443. NOTE: You can restrict remote access to only specified IP addresses in Network Settings → Firewall under Remote Administration Access Control. Allow Remote SSH Access: This will enable SSH access to the router from the Internet. It is only available when the SSH access is enabled in the Local Management tab. Some Carriers block the remote SSH Access po rts. If a ping to the router's WAN port does not work, it is unlikely that remote SSH Access will work.

223. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 220 SNMPv3: SNMP version 3 includes all prior features with security available. SNMPv3 is the most secure setting for SNMP. If you wish to configure traps then you must use SNMP version 3. Get community string: The “Get community string” is used to read SNMP information from the router. This string is like a password that is transmitted in regular text with no protection. Set community string: The “Set community string” is used when writing SNMP settings to the router. This string is like a password. It is a g ood idea to make it different than the “Get community string.” 8.8.1 SNMPv3 If you select SNMPv3, you have several additional configuration options for added security. Authentication type: Select the authentication and encryption type that will be used when con necting to the router from the following dropdown list. These settings must match the configuration used on any SNMP clients. • MD5 with no encryption • SHA with no encryption • MD5 with DES encryption • SHA with DES encryption • MD5 with AES encryption • SHA with AE S encryption Username: Enter the Username configured on your SNMP host in the username field. Password: Enter the Password for your SNMP host in the password and verify password fields. This password must be at least 8 characters long. Enable SNMP traps: Enabling traps will allow you to configure a destination server, community, and port for trap notifications. Trap notifications are returned to the server with SNMPv1.

231. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 228 Direct Sequence Spread Spectrum DSSS . Modulation technique used by 802.11b wireless devices. DMZ Demilitarized Zone. A computer that logically sits in a “no - mans - land” between the LAN and the WAN. The DMZ computer trades some of the protection of the router’s security mechanisms for the convenience of being directly addressable from the Internet . DNS Domain Name System . Translates Domain Names to IP addresses. Domain name A name that is associated with an IP address. Download To send a request from one computer to another and have the file transmitted back to the requesting computer. DSL Digital S ubscriber Line. High bandwidth Internet connection over telephone lines. Duplex Sending and Receivi ng data transmissions at the sam e time. Dy namic DNS service Dynamic DNS is provided by companies to allow users with Dynamic IP addresses to obtain a Domain Name that will always b e linked to their changing IP address. The IP address is updated by either client software running on a computer or by a router that supports Dynamic DNS, whenever the IP address changes. Dynamic IP address IP address that is assigned by a DHCP server and that may change. Cable Internet providers usually use this method to assign IP addresses to their customers. EAP Exten sible Authentication Protocol. Email Electronic Mail is a computer - stored message that is transmitted over the Internet . Encryption Converting data into cyphertext so that it cannot be easily read. Ethernet The most widely used technology for Local Area Ne tworks. Fiber optic A way of sending data through light impulses over glass or plastic wire or fiber.

128. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 125 7.1.2 Device Configuration Clicking on a device reveals the following information: • State (Connected, Available, etc.) • Port • UID (Unique identifier. This could be a name or number/letter combinati on.) • IP Address • Gateway • Netmask • Stats : b ytes i n , b ytes out • Uptime (in seconds) Click “ Edit ” to view configuration optio ns for the selected device. For 3G/4G modems, select the modem and click “Control” to view options to activate or update.

236. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 233 OSPF Open Shortest Path First . A routing protocol that is used more than RIP in larger scale networks bec ause only changes to the routing table are sent to all the other routers in the network as opposed to sending the entire routing table at a regular interval, which is how RIP functions. Password A sequence of characters that is used to authenticate request s to resources on a network. Personal Area Network The interconnection of networking devices within a range of 10 meters. Physical layer The first layer of the OSI model. Provides the hardware means of transmitting electrical signals on a data carrier. Ping A utility prog ram that verifies that a given Internet address exists and can receive messages. The utility sends a control packet to the given address and waits for a response . PoE Power over Ethernet . Th e means of transmitting electricity over the un used pairs in a category 5 Ethernet cable. POP3 Post Office Protocol 3 . U sed for receiving email. Port A logical channel endpoint in a network. A computer might have only one physical channel (its Ethernet channel) but can have multiple ports (logical channels) each identified by a number. PPP Point - to - Point Protocol . U sed for two computers to communicate with each over a serial interface, like a phone line. PPPoE Point - to - Point Protocol over Ethernet . U sed to connect multiple computers to a remote serv er over Ethernet. PPTP Point - to - Point Tunneling Protocol . U sed for creating VPN tunnels over the Internet between two networks. Preamble Used to synchronize communication timing between devices on a network. QoS Quality of Service. RADIUS Remote Authentica tion Dial - In User Service . A llows for remote users to dial into a central server and be authenticated in order to access resources on a network.

6. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 3 1 INTRODUCTION 1.1 Package Contents • Cradlepoint CO R: Integrated Broadband Router: IBR600 (includes WiFi) or IBR650 (no WiFi) with embedded high - speed modem (4G LTE / 3G EVDO rev A, EVDO rev A, WiMAX, LTE/HSPA+, HSPA+). • AC power adapter (12V, 1.5A) • Two external modem antennas • Two 2.4 GHz H igh Performance 802.11n WiFi Antennas ( IBR600 only) • Mounting Hardware • Quick Start Guide 1.2 System Requirements • At least one Internet source: an a ctive subscription for the embedded modem; an Ethernet - based modem ; or WiFi as WAN • Windows 2000/XP/7 , Mac OS X, or Linux c omputer ( with Wi Fi a dapter for IBR600 WiFi functionality) • Internet Explorer v6.0 or higher, Firefox v2.0 or higher, Safari v1.0 or higher 1.3 IBR6 0 0 /IBR650 Overview COR: THE HEART OF YOUR M2M NETWORK • For use in business critical high - availability installations such as ATMs, Kiosks, Surveillance, Vehicles, etc. that require 24x7 connectivity • Increase your network availability with WiPipe ™ - powered automatic failover/failback internal functionality • Supports both wireless and wired Internet connections (two Ethernet ports for either LAN/LAN or WAN/LAN ) • Secure IPs ec VPN (5 concurrent sessions maximum) • Centralize the administration and monitoring of distributed routers using WiPipe Central.

131. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 128 Failback Configuration (Advanced) This is used to configure failback, which is the ability to go back to a higher priority WAN interface if it regains connection to its network. Usage: Fail back based on the amount of data passed over time. This is a good setting for when you have a dual - mode EVDO/WiMAX modem and you are going in and out of WiMAX coverage. If the router has failed over to EVDO it will wait until you have low data usage before bringing down the EVDO connection to check if a WiMAX connection can be made. • High (Rate: 80 KB/s. Time Period: 30 seconds.) • Normal (Rate: 20 KB/s. Time Period: 90 seconds.) • Low (Rate: 10 KB/s. Time Period: 240 seconds.) • Custom (Rate range: 1 - 100 KB/s. Time Period range: 10 - 300 seconds.) Time: Fail back only after a set period of time. (Default: 90 seconds. Range: 10 - 300 seconds.) This is a good setting if you have a primary wired WAN co nnection and only use a modem for failover when your wired connection goes down. This ensures that the higher priority interface has remained online for a set period of time before it becomes active (in case the connection is dropping in and out, for examp le). Disabled: Deactivate failback mode. Immediate Mode : Fail back immediately whenever a higher priority interface is plugged in or when there is a priority change . Immediate failback returns you to the use of your preferred Internet source more quickly which may have advantages such as reducing the cost of a failover data plan, but it may cause more interruptions in your network than Usage or Time modes.

161. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 158 Tunnel Enabled : Select to activate the tunnel. Keep Alive : This feature monitors the status of a tunnel. This will more accurately determine if the tunnel is alive or not. Choose the Rate in seconds for each check (Default: 10 seconds. Range: 2 – 3600 seconds) and the number of Retry attempts (Default: 3. Range: 1 – 255). Page 2 : Routes Adding routes allows you to configure what types of network traffic from the local host or hosts will be allowed through the tunnel. Click Add Route to configure a new route. You will need to input the following information , defined by the remote network : • Network Address • Netmask: (Default: 255.255.255.0) You can set the tunnel to connect to a range of IP address es or to a single IP address. For example, you could input 192.168.0.0 and 255.255.255.0 to connect your tunnel to all the addresses of the remote network in the 192.168.0.x range. Alternatively, you could select a single addres s by inputting that address along with a Netmask of 255.255.255.255 . Click Save to record each new route. When you have finished adding routes, click Finish to save your GRE tunnel configuration.

196. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 193 • Enable GPS server on LAN: Enables a server on the LAN side of the firewall that will periodically send GPS NMEA sentences to TCP connected clients. It also responds to incoming UDP datagrams. o GPS server port number • Enable GPS reporting to remote server: Enables periodic reporting of GPS NMEA sentences to a remote server. The router will buffer NMEA data if errors are encountered or if the Internet connection goes down and send the b uffered sentences when the connection is restored. o Remote server hostname or IP o Remote server port o UDP remote server: Using UDP instead of TCP reduces the load on the router and may save bandwidth. However UDP does not provide any guarantee for delivery. The router will typically assume sentences have been received by the remote UDP server and will not buffer those sentences. o Report only over specific time interval: Restricts the NMEA sentence reporting to a remote server to a specific time interval. Depe nding on your selections (and other possible factors) , reporting may include proprietary sentences. For example, if you select Include System ID , the report will include proprietary sentences of the following format (in addition to the standard sentences): $PCPTI,{System ID},{router timestamp},{GGA timestamp},{GGA checksum}*{checksum} “PCPTI” stands for Proprietary, Cradlepoint , Identification (P - CPT - I).

217. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 214 8.6.1 Simple Mode Sett ings Display: This section allows you to choose if a "Terms of Use" page will be given to the user connecting to the hotspot. • Internal Terms of Use. Fill in your own terms of use. • External Terms of Use. Specify a URL that has the Terms of Use page. Users will automatically be directed to this page. • No Terms of Use. Redirect Only. Redirection on Successful Authentication : Depending on your choice for the “Terms of Use” page, your have further options for where the user will be directed. After the user accepts the terms, you can either let him/her continue to the URL they were trying to reach or you can force the user to go to a specified URL once before continuing on. • To the URL the user intended to visit. • To an administrator - defined URL. Redirect URL: If you have chosen to send users to an administrator - defined URL, you will need to specify the address. Session Timeout: (Default: 60 minutes.) The amount of time the user may use the router before being for ced to authenticate again. Idle Timeout: (Default: 15 minutes.) If the user is idle for this amount of time, make them re - authenticate. Bandwidth (upload): (Default: 512 Kbits/sec.) The data rate limit for users uploading data through the hotspot. Bandwid th (download): (Default: 1024 Kbits/sec.) The data rate limit for users downloading data through the hotspot.

220. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 217 8.7 Serial Redirector A single USB Serial device can be used to establish a serial link to a host port on the router. The USB Serial device can also be accessed by running "serial" from an SSH session. 8.7.1 Telnet to Serial Configuration Enabled: Enabling Telnet to Serial will star t a Telnet server that passes its connection to the serial adapter. Enabling this service is not necessary when accessing serial through SSH. LAN : Enable serial redirector for LAN connections. Authenticated LAN: Enable serial redirector for Authenticated LAN connections. You must be logged into the router to use the redirector. WAN: Enable serial redirector for WAN connections. Server Port: Enter a port number for the redirector to use. (Default: 7218) 8.7.2 USB Serial Adapter Configuration Baud Rate: Select fro m the dropdown list. • 50 • 75 • 110 • 134 • 150 • 200 • 300 • 600

228. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 225 9 GLOSSARY 802.11 A family of specifications for wireless local area networks (WLANs) developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). Access Control List ACL. This is a database of network devices that are allowed to access resources on the network. Access Point AP. Device that allows wireless clients to connect to it and access the network. ActiveX A Microsoft specification for the interaction of software components. Ad - hoc network Peer - to - Peer network between wireless clients. Address Resolution Protocol ARP. Used to map MAC addresses to IP addresses so that conversions can be made in both directions. ADSL Asymmetric Digital Subscriber Line. Advanced Encryption Standard AES. Government encryption standard. Alphanumeric Characters A - Z and 0 - 9. Antenna Used to transmit and receive RF signals. AppleTalk A set of Local Area Network protocols developed by Apple for their computer systems. AppleTalk Address Resolution Protocol AARP. Used to map the MAC addresses of Apple computers to their AppleTalk network addresses, so that conversions can be made in both directions. Application layer 7th Layer of the OSI model. Provides services to applications to ensure that they can communi cate properly with other applications on a network. ASCII American Standard Code for Information Interchange. This system of characters is most commonly used for text files. Attenuation The loss in strength of digital and analog signals. The loss is greate r when the signal is being transmitted over long distances.

235. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 232 MDIX Medium Dependent Interface Crossover . A n Ethernet port for a connection to a crossover cable. MIB Management Information Base . A set of objects that can be managed by using SNMP. Modem A device that m odulates digital signals from a compute r to an analog signal in order to transmit the si gnal over phone lines. It also d emodulates the analog signals coming from the phone lines to digital signals for your computer. MPPE Microsoft Point - to - Point Encryption . U sed to secure data transmissions ove r PPTP connections. MTU Maximum Transmission Unit . T he largest packet that can be transmitted on a packet - based network like the Internet . Multicast Sending data from one device to many devices on a network. NAT Network Address Translation . A llows many pri vate IP addresses to connect to the Internet , or another network, through one IP address. NetBEUI NetBIOS Extended User Interface . A Local Area Network communication protocol. This is an updated version of NetBIOS. NetBIOS Network Basic Input/Output System. Netmask Determines what portion of an IP address designates the Network and which part designates the Host. Network Interface Card NIC. A card installed in a computer or built onto the motherboard that allows the computer to connect to a network. N etwork Layer The third layer of the OSI model which handles the routing of traffic on a network. Network Time Protocol NTP. Used to synchronize the time of all the computers in a network. OFDM Orthogonal Frequency - Division Multiplexing . T he modulation tech nique for both 802.11a and 802.11g. OSI Open Systems Interconnection . T he reference model for how data should travel between two devices on a network.

107. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 104 VRRP : VRRP (Virtual Router Redundancy Protocol) allows you to associate multiple routers with one LAN so that if the primary physical router fails, the LAN will keep the same settings via the virtual router. Enable VRRP: Select to enable VRRP configuration options. Virtual Router IP: IP address of the virtual r ou ter . This must be distinct from the IP address of any physical router associated with the virtual router. Virtual Router ID: Identifying number of the virtual r outer . (Range: 1 - 255) Router Priority: Failover priority level of this physical router. The physical router with the highest priority number will have primary ownership of the virtual router. (Range: 1 - 254) WAN Fault Priority: This optional value sets the failover priority of this router when no WAN connection is available. If the value matches t he normal router priority, WAN connection state will not be considered. If the value is empty (the default), the router will always give up ownership of the virtual IP and let a new master take over when no WAN connection is available. Advertisement Interv al: Sets the amount of time (in seconds) bet ween VRRP advertisements, which communicate the router status. The default of 1 second is standard . Initial Virtual Router State: This controls the initial VRRP failover state for this physical router : c hoose Mas ter or Backup . This sets up the virtual router association more quickly than the Router Priority level, but the Router Priority assignment will eventually overrule this if there is a discrepancy. Authentication: VRRP Authentication Method. This is for lega cy purposes: VRRP Authentication has been deprecated as of RFC 3768. Select None or Simple . If you select Simple , input a VRRP group password. Provide Virtual IP in DHCP leases: Select this to automatically set the DHCP default gateway address and DNS serv er address to the v irtual IP in DHCP leases provided on this network.

113. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 110 Ethernet Port Configuration Ethernet Port Configuration provides controls for your router’s Ethernet ports. There are two ports: one set as LAN and one set as WAN. While default settings will be sufficient in most circumstances, you have the ability to control: Mode (WAN or LAN) and Link Speed . Additional controls for WAN ports are available in Internet → Ethernet Settings . Mode : WAN or LAN . • Internet ( WAN ) is used t o connect to another network such as a hotel or office wired network. The WAN connection is used as a possible source of Internet for the router . • Local Network ( LAN ) is for connecting a computer or similar device directly to the router with an Ethernet cab le. Link Speed : Default setting is Auto. The Auto setting is preferred in most cases. • Auto • 10Mbps - Half Duplex • 10Mbps - Full Duplex • 100Mbps - Half Duplex • 100Mbps - Full Duplex • 1000Mbps - Full Duplex

30. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 27 Choose a personalized WPA PASSWORD or WEP KEY . This password will be used to connect devices to the router’s WiFi broadcast once the security settings have been saved. • WPA Password: The WPA Password must be between 8 and 64 characters long. A combination of upper and lower case letters along with numbers and special characters is recommended to prevent hackers from gaining access to your network. • W EP K ey: A WEP Key must be either a hexadecima l value of 5 or 13 characters or a text value of 10 or 26 characters. Click NEXT . 7) Configuring Your Access Point Name (APN) : If you are using a SIM - based modem (LTE/GSM/HSPA) with your Cradlepoint router you may need to configure the APN before it will properly connect to your carrier. Wireless carriers offer several APNs, so check with your carrier to confirm the appropriate one to use. Some examples include: • AT&T: "broadband" • T - Mobile: "epc.tmobile.com" • Rogers LTE: "lteinternet.apn" • Bell: "inet.bell.ca" • TELUS: "isp.telus.com" You can either leave this on the Default setting or select Manual and input a specific APN. If your sp ecific modem or SIM already has APNs programmed into it , you s hould lea ve this on the Default setting. A fter finishing this Wizard go to Internet → Connection Manager , select your modem, and edit the settings. The SIM PIN/APN tab has more available settings than are provided here.

229. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 226 Authentication To provide credentials, like a Password, in order to verify that the person or device is really who they are claiming to be. Automatic Private IP Addressing APIPA. An IP address tha t a Windows computer will assign itself when it is configured to obtain an IP address automatically but no DHCP server is available on the network. Backward Compatible The ability for new devices to communicate and interact with older legacy devices to gua rantee interoperability. Bandwidth The maximum amount of bytes or bits per second that can be transmitted to and from a network device. Basic Input/Output System BIOS. A program that the processor of a computer uses to startup the system once it is turned on. Baud Data transmission speed. Beacon A data frame by which one of the stations in a WiFi network periodically broadcasts network control data to other wireless stations. Bit rate The amount of bits that pass in given amount of time. Bit/sec Bits per second. BOOTP Bootstrap Protocol. Allows for computers to be booted up and given an IP address with no user intervention. Bottleneck A time during processes when something causes the process to slowdown or stop all together. Broadband A wide band of frequencies available for transmitting data. Broadcast Transmitting data in all directions at once. Browser A program that allows you to access resources on the web and provides them to you graphically. Cable modem A device that allows you to connect a com puter up to a coaxial cable and receive Internet access from your Cable provider. CardBus A newer version of the PC Card or PCMCIA interface. It supports a 32 - bit data path, DMA, and consumes less voltage.

214. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 211 8.4.1 Enterprise Cloud Manager Settings (Advanced) • Enabled: Enable the ECM client to contact the server. While this box is unchecked, the ECM client will neve r attempt to contact the server. (Default: Enabled) • Server Host:Port : The DNS hostname and port number for your ECM server. (Default: stream. Cradlepoint .com) • Session Retry Timer : How long to wait, in seconds, before starting a new ECM session following a connection drop or connectivity failure. Note that this value is a starting point for an internal backoff timer that prevents superfluous r etries during connec tivity loss. • Unmanaged Checkin Timer : How often, in seconds, the router check s with ECM to see if the router is remotely activated. Note that this value is a starting point for an internal backoff timer that reduces network usage over time. • Maximum Alerts Buffer : The maximum number of alerts to buffer when offline. 8.4.2 Legacy WiPipe Central Settings (Advanced) WiPipe Central is Cradlepoint ’s legacy remote management system. • Enable d : Enables the WiPipe Central client to contact the server. • Ethernet Communicati on Only: Select this to ensure that the WiPipe Central client will not start unless the WAN is Ethernet. • Registration URL: Register your router using the code provided by Cradlepoint when you purchase WiPipe Central.

233. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 230 Host Computer on a network. HTTP Hypertext Transfer Protocol . U sed to transfer files from HTTP servers (web servers) to HTTP clients (web browsers). HTTPS HTTP over SSL . U sed to encrypt and decrypt HTTP transmissions. Hub A networking device that connects multiple devices together. ICMP Internet Co ntrol Message Protocol. IEEE Institute of Electrical and Electronics Engineers. IGMP Internet Group Management Protocol . U sed to make sure that computers can report their multicast group membership to adjacent routers. IIS Internet Information Server . A WE B server and FTP server provided by Microsoft. IKE Internet Key Exchange . U sed to ensure security for VPN connections. Infrastructure In terms of a wireless network, this i s when wireless clients use an a ccess p oint to gain access to the network. Internet A system of worldwide networks that use TCP/IP to allow for resources to be accessed from computers around the world. Internet Explorer A World Wide Web browser created and provided by Microsoft. Internet Protocol The method of transferring data from one c omputer to another on the Internet . Internet Protocol Security IPsec provides security at the packet processing layer of network communication. Internet Service Provider An ISP provides access to the Internet to individuals or companies. Intranet A private network.

80. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 77 6.4.3 IP Filter Rules (Advanced) An "Incoming" IP filter rule restricts remote access to computers on your local network. "Outgoing" filter rules prevent computers on your local network from initiating communication to the address range specified in the rule. This feature is especially useful when combined with port forwarding and/or DMZ to restrict remote access to a specified host or network range. For example, in order to host a server you might have opened ports with a port forwarding rule that could expose your LAN to cyber attacks. With an incoming IP filter rule, you can restrict the access to your LAN to only known devices. • Name: Name your rule. • Enabled: Selected by default. • Log : When checked each packet matching this filter rule will be logged in the System Logs. • Action: “Allow” or “Deny” • Protocol: Any, ICMP, TCP, UDP, GRE, ESP, or SCTP. IP Source / IP Destination • IP Negation: Match on any IP address that is NOT in the specified IP network range. • Network IP: Optional field to specify a matching network IP address for this rule to match against. • Netmask: Use this to define a subnet size this rule will match against.

238. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 235 Stateful Packet Inspection SPI. A feature of a firewall that monitors outgoing and incoming traffic to make sure that only valid responses to outgoing requests are allowed to pass though the firewall. Subnet mask Determines what portion of an IP address designates the Network and which part designates the Host. Sysl og System Logger . A distributed logging interface for collecting in one place the logs from different sources. Originally written for UNIX, it is now available for other operating systems, including Windows. TCP Transmission Control Protocol. TCP Raw A TCP/IP protocol for transmitting streams of printer data. TCP/IP Transmission Control Protocol/ Internet Protocol. TFTP Trivial File Transfer Protocol . A utility used for transferring files that is simpler to use than FTP but with less features. Throughput The amount of data that can be transferred in a given time period. Traceroute A utility that displays the routes between you r computer and a specific destination. UDP User Datagram Protocol. Unicast Communication between a single sender and receiver. Unive rsal Plug and Play UPnP. A standard that allows network devices to discover each other and configure themselves to be a part of the network. Update To install a more recent version of a software or firmware product. Upgrade To install a more recent version of a software or firmware product. Upload To send a request from one computer to another and have a file transmitted from the requesting computer to the other. URL Uniform Resource Locator . A unique address for files accessible on the Internet .

139. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 136 6rd Tunnel IPv6 Rapid Deployment (6rd) is a method of IPv6 site configuration derived from 6to4. It is different from 6to4 in that the ISP provides explicit 6rd infrastructure that hand les the IPv4 ↔ IPv6 translation within the ISP network. 6rd is considered more reliable than 6to4 as the ISP explicitly maintains infrastructure to support tunneled IPv6 traffic over their IPv4 network. • 6rd Prefix – The 6rd prefix and prefix length should be supplied by your ISP. • IPv4 Border Router Address – This address should be supplied by your ISP. • IPv4 Common Prefix Mask – Input the number of common prefix bits that you can mask off of the WAN's IPv4 address. • Primary IPv6 DNS Server – (optional) Depend ing on your provider, this may be required . This o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provider, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs .

204. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 201 apn : Set the APN on the modem (for SIM - based modems)* • Sy ntax: <password>,apn,<new APN>,[ port , ] • Example: 1234,apn, myapn@apn.com , //set APN of highest priority modem • Example: 1234,apn, myapn@apn.com ,usb1, //set APN for modem in port usb1 userpass : Set the modem's authentication username and password* • Syntax: <password>,userpass, <username>,<userpassword>,[port , ] • Example: 1234,userpass,joe,mypassword, //set information of highest priority modem • Example: 1234,userpass,joe,mypassword,usb3, //set information on modem in port usb3 simpin : Set the SIM's PIN* • Syntax : <password>,simpin,<pin>,[port , ] • Example: 1234,simpin ,5678, //set simpin in highest priority mod em • Example: 1234,simpin,5678,usb2 //set simpin in modem on port usb2 log: Return a portion of the router log • Syntax: <password>,log,[start , ] • Example: 1234,log, //return the first 10 items of the log (items 0 through 9) • Example: 1234,log,10, //return items 10 through 19 of the log • Example: 1234,log,2 0, //return items 20 through 29 of the log Sending log information via SMS messages likely results in several resulting texts. Please be aware of the costs of text messages on the modem’s accou nt , and use this command only if necessary . * The “port” parameter is opt ional. It specifies which port to perform the action on . If not given, the action will happen on the highest priority modem.

190. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 18 7 Advanced Security Mode When you enable Advanced Security Mode , you have three different options for the Authentication Mode : • Local Users • TACACS+ • RADIUS Local Users Create users with administrative privileges by inputting usernames and passwords in the Advanced User Management table. The default username is “admin,” but you can edit this name, or delete it once you create other users (you can’t delete the user you are currently signed in as). In TACACS+ and RADIUS modes, if the servers cannot be reached, either because the WAN is down or a response is not received within the selected Server Timeout , the router will automatically fall back to using Local Users mode to prevent any potential of being locked out. TACACS+ TACACS+ stands for “Terminal Access Contro ller Access - Control System plus ” . The router will use a TACACS+ server (or two , optional ly ) to authorize administration . Server Timeout : If the servers are not reached within the set time (possibly because the WAN is down), the router will automatically fall back to using Local Users mode to prevent users from being locked out. Authentication Service : Choose from : • ASCII / Login

230. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 227 CAT 5 Category 5. Used for 10/100 Mbps or 1Gbps E thernet connections. Client A program or user that requests data from a server. Collision When do two devices on the same Ethernet network try and transmit data at the exact same time. Cookie Information that is stored on the hard drive of your computer th at holds your preferences to the site that gave your computer the cookie. Data Information that has been translated into binary so that it can be processed or moved to another device. Data Encryption Standard Uses a randomly selected 56 - bit key that must b e known by both the sender and the receiver when information is exchanged. Data - Link layer The second layer of the OSI model. Controls the movement of data on the physical link of a network. Database Organizes information so that it can be managed updated, as well as easily accessed by users or applications. DB - 25 A 25 - pin male connector for attaching External modems or RS - 232 serial devices. DB - 9 A 9 - pin connector for RS - 232 connections dBd Decibels related to dipole antenna. dBi Decibels relative to isotr opic radiator. dBm Decibels relative to one milliwatt. Decrypt To unscramble an encrypted message back into plain text. Default A predetermined value or setting that is used by a program when no user input has been entered for this value or setting. DHCP D ynamic Host Configuration Protocol . Used to automatically assign IP addresses from a predefined pool of addresses to computers or devices that request them. Digital certificate An electronic method of providing credentials to a server in order to have acce ss to it or a network.

2. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 ` Preface Cradlepoint reserves the right to revise this publication and to make changes in the content thereof without obligation to notify any person or organization of any revisions or changes. Manual Revisions Revision Date Description Author 1.0 S ept. 13 , 2011 Initial release for Firmware version 3.3.0 Jeremy Cramer 1. 1 May 4 , 2012 Updated for Firmware version 3.5 .1 Jeremy Cramer 1.2 June 6 , 2012 Updated for Firmware version 3.6.1 Jeremy Cramer 1.3 July 23, 2012 Updated for Firmware version 3.6.3 ; u pdated module information for HSPA+, LTE/HSPA+ Jeremy Cramer 2.0 Sept. 19 , 2012 Updated for Firmware version 4.0.2 Jeremy Cramer 2.1 Jan. 15 , 2013 Updated for Firmware version 4.1.1 Jeremy Cramer 2.2 Feb. 26, 2013 Updated for Firmware version 4.2.0 Jeremy Cramer 2.3 Aug. 21 , 2013 Updated for Firmware version 4.4.0 and hardware version 1.3 Jeremy Cramer

134. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 131 Enable IPv6 and select the desired IPv6 connection method for this WAN interface. • Disabled (default) – IPv6 disabled on this interface. • Auto – IPv6 will use automatic connection settings ( if available ) . • Static – Inp ut a specific IPv6 address for your WAN connection. T his is provided by the ISP if it is supported. • 6to4 Tunnel ( http://en.wikipedia.org/wiki/6to4 ) – E ncapsulate s the IPv6 data and transfer s it to an automatic tunnel provider ( if your ISP supports it ) . • 6in4 Tunnel ( http://en.wikipedia.org/wiki/6in4 ) – E ncapsulate s the IPv6 data and send s it to the configured tunnel provider. • 6rd T unnel (IPv6 rapid deployment: http://en.wikipedia.org/wiki/IPv6_rapid_deployment ) – E ncapsulate s the IPv6 data and send s it to a relay server provided by your ISP. When you configure IPv6, you have t he option to designate DNS Servers and Delegated Networks . Because of the dual - stack setu p, these settings are optional: when configured for IPv6, the router will fall back to IPv4 settings when necessary. DNS Servers Each WAN device is required to connect IPv4 before connecting IPv6 . Because of this, DNS servers are optional, as most IPv4 DNS servers will respond with AAAA records ( 128 - bit IPv6 DNS record s , most commonly used to map hostnames to the IPv6 address of the host ) if requested. If no IPv6 DNS servers are configured , the system will fall back to the DNS servers provided by the IPv4 configuration. Delegated Networks A delegated network is an IPv6 network that is inherently provided by or closely tied to a WAN IP configuration. The IPv6 model is for each device to have end - to - end IP connectivity without relying on any translation mec hanism. In order to achieve this, each client device on the LAN network needs to have a publicly rout able IPv6 address.

232. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 229 File server A computer on a network that stores data so that the other computers on the network can all access it. File sharing Allowing data from compute rs on a network to be accessed by other computers on the network with different levels of access rights. Firewall A device that protects resources of the Local Area Network from unauthorized users outside of the local network. Firmware Programming that is inserted into a hardware device that tells it how to function. Fragmentation Breaking up data into smaller pieces to make it easier to store. FTP File Transfer Protocol. Easiest way to transfer files between computers on the Internet . Full - duplex Sending and Receiving data at the same time. Gain The amount an amplifier boosts the wireless signal. Gateway A device that connects you r network to another, like the Internet . Gbps Gigabits per second. Gigabit Ethernet Transmission technology that provides a data rate of 1 billion bits per second. GUI Graphical user interface. H.323 A standard that provides consistency of voice and video transmissions and compatibility for video conferencing devices. Half - duplex Data cannot be transmitted and received at the same time. Hashing Transforming a string of characters into a shorter string with a predefined length. Hexadecimal Characters 0 - 9 and A - F. Hop The action of data packets being transmitted from one router to another.

156. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 153 7.3.1 Data Usage Rule s The Date Usage Rule display shows basic information for each rule you have created ( including rules created with a template ) . The following information is displayed: • Rule Name • Enabled: True/False • Date for Rule Reset • Cycle Type: Daily, Weekly, or Monthly • Cap: Amount in MB. • Current Usage: Shown as an amount in MB, as a percen tage of the cap, and in a bar graph. Click Add to configure a new Data Usage Rule. Data Usage Rule – page 1 Rule Name: Give your rule a name for later recognition. WAN Selection: Select from the dropdown list of currently attached WAN devices. Assigned Usage in MB: Enter a cap amount in megabytes. 1024 megabytes equals 1 gigabyte. Rule Enabled: (Default: Enabled.) Click to disable. Use with Load Balancing : When checked, the Load Balancing feature is allowed to use the thresholds and metrics of this rule when making balance decisions. This causes Load Balancing to spread the data usage between interfaces according to the assigned usage rather than

206. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 203 8.1.8 System Logging Logging Level: Setting the log level controls which messages are stored or filtered out. A log level of Debug will record the most information while a log level of Critical will only record the most urgent messages. Each level includes all messages from all of the levels below it on the list (e.g. “Warning” includes all “Error” and “Critical” messages as well). • Debug • Info • Warning • Error • Critical Enable Logging to a Syslog Server: Enabling this option will send log messages to a specified Syslog server. After enabling, type the Hostname or IP address of the Syslog server (or select from the dropdown menu). Syslog Server Address: Select the Hostname or IP address from the dropdown menu, or type this in manually. Include System ID: This option will include the router ’ s "System ID" at the begin n ing of every log message. This is oft en useful when a single remote S yslog server is handling logs for several routers. Include UTF8 Byte Order Mark: The log message is sent using UTF - 8 encoding. By default the router will attach the Unic ode Byte Order Mark (BOM) to the Syslog message in compliance with the Syslog protocol, RFC5424. Some Syslog servers may not fully support RFC5424 and will treat the BOM as ASCII text, which will appear as garbled characters in the log. If this occurs, dis able this option. Log to attached USB stick: Only enable this option if instructed by a Cradlepoint support agent. This will write a very verbose log file to the root level of an attached USB stick. Please disable the feature before removing the USB stick, or you may lose some logging data. Verbose modem logging: Only enable this option if instructed by a Cradlepoint support agent. Create support log: This functionality allows for a quick collection of system logging. Create this log file when instructed by a Cradlepoint support agent.

237. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 234 Reboot To restart a computer and relo ad it s operating software or firmware from nonvolatile storage. Rendezvous Apple’s version of UPnP, which allows for devices on a network to discover each other and be connected without the need to configure any settings. Repeater Retransmits the signal of an access p oint in order to extend its coverage. RIP Routing Information Protocol . U sed to synchronize the routing table of all the routers on a network. RJ - 11 The most commonly used connection method for telephones. RJ - 45 The most commonly used connection method for Ethernet. RS - 232C The interface for serial communication betw een computers and other related devices. RSA Algorithm used for encryption and authentication. Server A computer on a network that provides services and resources to other computers on the network. Session key An encryption and decryption key that is generated for every communication session between two computers. Session layer The fifth layer of the OSI model which coordinates the connection and communication between applications on both ends. Simple Mail Transfer Protocol SMTP. Used for sending and r eceiving email. Simple Network Management Protocol SNMP. Governs the management and monitoring of network devices. S ession I nitiation P rotocol SIP. A standard protocol for initiating a user session that involves multimedia content, such as voice or chat. S OHO Small Office/Home Office. SSH Secure Shell . A command line interface that allows for secure connections to remote computers. SSID Service Set Identifier . A name for a wireless network.

239. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 236 USB Univer sal Serial Bus. UTP Unshielded Twisted Pair. Virtual Private Network VPN . A secure tunnel over the Internet to connect remote offices or users to their company’s network. VLAN Virtual LAN. Voice over IP VoIP. Send ing voice information over the Internet as opposed to the PSTN . Wake on LAN Allows you to power up a computer th r ough it s Network Interface Card. WAN Wide Area Network. WCN Windows Connect Now. A Microsoft method for configuring and bootstrapping wireless networking hardware (access points) and wireless clients, including PCs and other devices. WDS Wireless Distribution System. A system that enables the interconnection of access points wirelessly. Web browser A utility that allows you to view content and interact with all of the information on t he World Wide Web. WEP Wired Equivalent Privacy . S ecurity for wireless networks that is supposed to be comparable to that of a wired network. Wi Fi Wireless Fidelity. Used to describe any of the 802.11 wireless networking specifications. Wi Fi Protected Acce ss An updated version of security for wireless networks that provides authentication as well as encryption. Wide Area Network The larger network that your LAN is connected to, which may be the Internet itself, or a regional or corporate network. Wir eless ( Wi Fi) LAN Connecting to a Local Area Network over one of the 802.11 wireless standards. Wireless I nternet S ervice P rovider WISP. A com pany that provides a broadband Internet connection over a wireless connection. WLAN Wireless Local Area Network.

94. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 91 Match and Set : Both of these have the following configuration options: • IP address : Input an IP address with this policy. • Metric : Numerical priority of the route. • Community : The BGP community list is a user - defined BGP communities attribute list. The BGP community list can be used for matching or manipulating BGP communities attribute i n updates. The community attributes are a 32 - bit number that also has some aliases. o internet : alias for well - known communities value 0 o no - export : alias for well - known communities value NO_EXPORT (0xffffff01) o no - advertise : alias for well - known communities v alue NO_ADVERTISE (0xffffff02) o local - AS : alias for well - known communities value NO_EXPORT_SUBCONFED (0xffffff03) Match : This specifies the policy implied if the `Matching Conditions' are met or not met, and which actions of the route map are to be taken, i f any. The two possibilities are: 1. Permit: If the entry matches, then carry out the `Set Actions'. Then finish processing the route map, permitting the route, unless an `Exit Action' indicates otherwise. 2. Deny: If the entry matches, then finish processing the route - map and deny the route (return `deny'). Set : A route - map entry may, optionally, specify one or more `Set Actions' to set or modify attributes of the route.

147. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 144 7.1.8 WiMAX Settings WiMAX Realm: Select from the following dropdown options: • Clear – c learwire - wmx.net • Rover – rover - wmx.net • Sprint 3G/4G – sprintpcs.com • Xohm – xohm.com • BridgeMAXX – bridgeMAXX.com • Time Warner Cable – mobile.rr.com • Comcast – mob.comcast.net TTLS Authentication Mode: TTLS inner authentication protocol. Select from the following dropdown options: • MSCHAPv2/MD5 (Microsoft Challenge Handshake Authentication Protocol version2/Message - Digest Algorithm 5) • PAP (Password Authentication Protocol) • CHAP (Challenge Handshake Authentication Protocol) TTLS Username : Username for TTLS authentication. TTLS Password: Password for TTLS authentication. WiMAX Authentication Identity : User ID on the network. Leave this blank unless your provider tells you otherwise.

234. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 231 Intrusion Detection A type of security that scans a network to detect attacks coming from inside and outside of the network. IP Internet Protocol. IP address A 32 - bit number, when talking ab out Internet Protocol Version 4, which identifies each c ompu ter that transmits data on the Internet or on an i ntranet. IPsec Internet Protocol Security. IPX Internet work Packet Exchange is a networking protocol developed by Novell to enable their Netware clients and servers to communicate. Java A programming language used to create programs and applets for web pages. Kbps Kilobits per second. Kbyte Kilobyte. L2TP Layer 2 Tunneling Protocol. LAN Local Area Network. Latency The amount of time that it takes a packet to get from the one point to another on a netwo rk. Also referred to as delay. LED Light Emitting Diode. Legacy Older devices or technology. Local Area Network LAN. A group of computers in a building that usually access files from a server. LPR/LPD “Line Printer Requestor”/”Line Printer Daemon”. A TCP/IP protocol for transmitting streams of printer data. MAC Address A unique hardware ID assigned to every Ethernet adapter by the manufacturer. Mbps Megabits per second. MDI Medium Dependent Interface . A n Ethernet port for a connection to a straight - thr ough cable.

50. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 47 5.6.1 Ethernet General Information • Unique Identifier wan • Model • Type e thernet • Port IP Information • DNS Servers • IP Address • Gateway Statistics • Incoming Bytes • Outgoing Bytes • Connection Uptime (secs)

167. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 164 7.7.1 Page 1: General Tunnel Name : Give the tunnel a name that uniquely identifies it. Anonymous Mode : Select to allow remote connections from any IP address. Responder Mode : When enabled, the router will not initiate negotiation with peers; otherwise start negotiations as soon as possible. Local Identity : This can be left blank for most users. If left blank it will default to the IP address of the WAN connection. Currently we only support identifiers in the form of an IP address , a user fully qualified domain name (user@mydomain.com) or just a fully qualified domain name ( www.mydomain.com ). If the remote side of the tunnel is configured to expect an identifier, then both must match in order for the negotiation to succeed. If NAT - T is being used, a single word (instead of an address) can be used if a DynDNS connection is not being used. Remote Identity : This can be left blank for most users. If left blank it will default to the IP address of the WAN connection. Currently we only support identifiers in the form of an IP address , a user fully qualified domain name (user@mydomain.com) or just a fully qualified domain name ( www.mydomain.com ). If no identifier is defined then no verification of the remote peer's identification will be done. If NAT - T is being use d, a single word (instead of an address) can be used if a DynDNS connection is not being used. Authentication Mode : Select from Pre - Shared Key and Certificate . Pre - Shared Key is used when there is a single key common to both ends of the VPN. Certificate re quires the creation of a set of certificates and a private key that can be uploaded to the router. Enable Certificate Support in the Global VPN Settings to upload a single set of certificates for the router to use.

42. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 3 9 5.2 Dashboard The Dashboard shows fundamental information about your router, divided into the following basic categories: • Router Information • Internet • Local Network s • WiFi Network s For more in - depth information and/or configuration options , click on the Detailed Info link beside the c ategory title. For each category, t his links to: • Router Information : System Settings → Administration • Internet : Internet → Connection Manager • Local Network s : Network Settings → WiFi / Local Networks • WiFi Networks : Network Settings → WiFi / Local Networks After the initial setup of the router, every time you log in you will automatically be directed to this Dashboard . Also, you can click on the Cradlepoint logo in the upper left - hand corner to return to the Dashboard from any page .

145. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 142 GSM Technology Auto Auto 3G Force 4G Force 3G (module auto selects) Force 2G (module auto selects) (<= 3G) LTE HSPA+ (4G/3.5G) HSPA (3G) EDGE (2.75G) GPRS (2.5G) IBR6x0LP ( Sierra Wireless MC7700 ) ✔ ✔ ✔ ✔ ✔ ✔ ✔ IBR6x0LP2 (Sierra Wireless MC7710 ) ✔ ✔ ✔ ✔ ✔ ✔ ✔ IBR6x0P (Sierra Wireless MC8705 ) ✔ ---- ---- ---- ---- ---- ----

36. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 33 Internet – Provides configuration options for the Internet sources, or WAN, used by the router. For example, you can set up a rule to track how much data you are using per month on a modem ( Data Usage ), set WiFi to be an Internet source ( WiFi as WAN / Bridge ), or set the failback order for your Internet sources ( Connection Manager ). System Settings – Provides broad administrative controls. For example, you can set up a Terms of Use page for your guest network ( Hotspot Services ), enable remote management of the router ( Administration ), or upgrade firmware ( System Software ). 4.4.1 Network Settings vs. Internet When using the Web interface, it will be important to pay attention to the difference between the Internet source for your IBR600 /IBR650 and the network created by the router . The “ Internet ” tab broadly refers to the router’s source of Internet, while the “Network Settings” tab broadly refers to the network created by the router. Internet tab Network Settings tab Internet “input” Source for IBR600/IBR650 WAN (Wide Area Network) Internet “output” Network created by IBR600/IBR650 LAN (Local Area Network) Examples: • If you want to change the content filtering settings for the network created by the IBR600 /IBR650 , go to the Network Settings tab. • If you have multiple Internet sources (such as the embedded modem and an Ethernet connection) for which you would l ike to set priority levels, go to the Internet tab.

129. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 126 7.1.3 General Settings • Enabled: Select/deselect to enable/disable. • Force NAT: Normally NAT is part of the Routing Mode setting which is selected on the LAN side in Network Settings → WiFi / Local Networks . Select this option to force NAT whenever this WAN device is being used. • Priority: This number controls failover and failback order. The lower the number, the higher the priority and the more use the device will get. This number will change when you move devices around with the priority arrows in the WAN Interfaces list. • Load Balance: Select to allow this device to be available for the Load Balance pool. • Download bandwidth: Defines the default download bandwidth for use in Load Balance and QoS (quality of service, or traffic shaping) algorithms. (Range: 128 Kb/s to 1 Gb/s .) • Upload bandwidth: Defines the default upload bandwidth for use in Load Balance and QoS (quality of service, or traffic shaping) algorithms . (Range: 128 Kb/s to 1 Gb/s.) • MTU: Maximum transmission unit. This is the size of the largest protocol data unit that the device can pass. (Range: 46 to 1500 Bytes.) • Hostname (This only shows for certain devices.)

219. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 216 UAM S ettings: • Login URL: Assigned by UAM service. • Splash Page URL: Optional URL that can point to an external page that can provide specific information to the user prior to being authenticated. The page must provide a link back to the Login URL in order for the user to be authenticated. For example - http:// lan ip address:uam port /prelogin or http://192.168.10.1:8000/prelogin. • Shared Secret: Optional, depending on the UAM service. • NAS/Gateway ID: Assigned by UAM service. 8.6.3 Allowed Hosts Prior to Authentication Adding host names to this list will allow access from your network to any external domain or website prior to being authenticated. For example, a hotel might allow access to its own website prior to authentication. Click Add to enter new h ostnames you wish to allow. Enter the Host or Domain Name of the website you wish to allow , i.e. www.company.com or company.com . To allow all domain and sub - domain options, use a wildcard, i.e. *.company.com. Click Submit to save your additions. 8.6.4 Authorized MAC Addresses Add the MAC addresses of trusted machines you want to give automatic access through the Hotspot portal.

52. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 49 General Information • Unique Identifier • Port int1 • Profile 3 VZWINTERNET • Model Internal LTE/EVDO • Type lte IP Information • DNS Servers • IP Address • Gateway Statistics • Incoming Bytes • Outgoing Bytes • Load Balance score • Connection Uptime (secs)

68. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 65 Click Add or Edit to open the Filter Rule Editor . • Assigned Network: Select either “All Networks ” or one of your LAN networks from the dropdown list. • Domain/URL/IP: Enter the Domain Name or URL ( address) of the website you wish to control access f or , e.g . www.google.com . To make sure the full domain is blocked, enter the most inclusive domain (e.g. google.com will effectively block www.google.com as well as maps.google.com and images.google. com ) . Alternatively you can use an IP address , e.g. 8.8.8.8 , or address range written in CIDR notation, e.g. 8.8.8.0/24 . • Filter Action: Select Block or Allow . • Rule Priority: Higher number rules overrule lower number rules. • Enabled: A rule can be enabled or disabled by selecting or deselecting the checkbox. Click Submit to save your rule changes.

98. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 95 IP v4 Settings : IP Address: This is the address used by the router for local area network communication. C hanges to this parameter may require a restart to computers on this network. Each network must have a distinct IP address. Most users will want an address from one of the following private IP ranges: • 10.0.0.1 - 10.255.255.1 • 172 .16.0.1 - 172.31.255.1 • 192.168.0.1 - 192.168.255. 1 NOTE: The final number does not have to be 1, but it is a simple, logic al convention for routers that leaves higher numbers free for other devices . Netmask: (Default: 255.255.255.0) C ontrols how many IP addresses c an be used in this network. The default value allows for 254 IP addresses . IPv4 Routing Mode: (Default: NAT) Each network can use a unique routing mode to connect to the Internet and other local networks. NAT is desirable for most configurations. Select fr om the following options in the dropdown list: • NAT: Network Address Translation hides private IP addresses behind the router's IP address. This is the simplest and most common choice for users, because NAT does the translation work for you. • Standard: NAT - l ess routing. If you select Standard , you must separately configure your IP addresses so that they will be publically accessible. Typically you will not select this option unless you have a specific reason to bypass NAT. • IP Passthrough: IP Passthrough passe s the IP address given by a cellular modem (WAN) through the router to Ethernet (LAN). All Ethernet ports must be in LAN mode (or disabled) and Hotspot, VPN, and GRE must be disabled. Any wireless interfaces must be removed from this network in order to en able IP Passthrough. The easiest way to enable IP Passthrough mode is with the IP Passthrough Setup Wizard (see Getting Started → IP Passthrough Setup ). • Hotspot: Provide Hotspot Services on this network, requiring Terms of Service or RADIUS/UAM authenticat ion before WAN access will occur on both wire less and wired LAN c onnections. To enable a Hotspot you must also configure your Hotspot settings under System Settings → Hotspot Services . • Disabled: Disable this network.

109. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 106 Wired 802.1X : (requires hardware version 2.0) This allows you to configure an authentication server that w ill accept authentication requests from devices attached to wired Ethernet ports. IEEE 802.1X defines the encapsulations of the Extensible Authentication Protocol (EAP). Click Enable 802.1X to require IEEE 802.1X authorization for the Ethernet ports associ ated with this network. Reauthentication Period: EAP re - authentication period in seconds. Authentication settings • Auth Server IP Address: This is the IP address of the connected RADIUS server. • Auth Server MAC Address: This is the hardware address of the connected RADIUS server’s interface. NOTE: If you don’t know the MAC address for the RADIUS server, enter 00:00:00:00:00:00 and the service will try to find the MAC address from the given IP address. • Port: 1812 is common for the authentication port. • Password: Assigned by the RADIUS server. A ccounting settings : Most of the accounting settings often match the authentication settings, depending on whether the RADIUS server is the same for both authentication a nd accounting. • Acct Server IP Address • Acct Server MAC Address • Port: 1813 is common for the accounting port. • Password

7. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 4 ENHANCED WIFI ( IBR600 ) • Wireless “N” WiFi (802.11n, legacy 802.11b/g, external 2x2 MIMO a ntenna system) • 2.4 GHz WiFi broadcast • Maximum security with both Public and Private networks • Dual SSIDs • Create a customized Hotspot with our ca ptive portal feature (include Terms of Service, advertisements , etc.) • Enhanced performance around walls and other obstructions ADDITIONAL FEATURES • Standardized platform and cloud - based management with Cradlepoint Enterprise Cloud Manager (subscription required) • Built - in GPS including NMEA GGA, VTG, and/or RMC sentences (depending on your modem type) • IP P assthrough • Up to 5 concurrent VPN endpoint sessions • Compatible with Cisco, Juniper, SonicWall, and other VPN termination systems • Establish continuous uptime with optimum total cost of ownership for broad deployment • Simple to install, configure and maintain with minimal impa ct on IT • Virtual LAN capabilities • Data Usage section that allow s users to track and manage modem use • NAT - less routing • VPN NAT traversal • OSPF, BGP, RIPv1 and RIPv2, VRRP • Site - to - site dynamic VPN with NHRP • IPv6 support • SMS support • Multicast Proxy support

216. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 213 8.6 Hotspot Services (IBR600) Any of your networks can be enabled as a hotspot. To enable a hotspot, you need to select a network and set it as a hotspot in Network Settings → WiFi / Local Networks . NOTE: Although any network can be a hotspot, the IBR6 00 allows only one hotspot. Hotspot Mode: Choose from the following dropdown options: • Simple: Allows “Terms of Use” page and timeout settings controlled within the router. • RADIUS/UAM: Allows you to set up ext ernal authentication servers. Local IP Network: A single LAN Group — including both WiFi and Ethernet — can be configured as your hotspot. If you do not already have a LAN Group configured as a hotspot, go to the WiFi / Local Networks page (you can click Configure to link to this page) and set the Routing Mode to "Hotspot" for the LAN Group you want to use. NOTE: Routing Mode is in the Local Network Editor under the IP Settings tab. Select a network in Network Settings → WiFi / Local Networks and click Edit to open the Local Network Editor. The IP Settings tab will already be open: the Routing Mode dropdown menu is at the bottom. Allow Service on 3G/4G Modems: Allows you to enable or disable hotspot access to the Internet over a modem. This is often used if the router has a main wired link and a secondary modem for failover (typically with a more expensive/limited data plan). Select this option if you want the router to allow data traffic over the modem if the wired connection goes down. Disable Service if Ethernet Threshold is met: This will block Hotspot use of the WAN when the threshold is met. This can be used if the router is being used as a backup failove r connection to another router with a wired connection. If that other router’s wired connection goes down and it starts using this router for its primary connection, then disable Hotspot us e of the WAN connection. Set the limiting Rate (KB/s) and Time Peri od (seconds). Redirect HTTPS Requests: This allows initial requests to HTTPS websites to be redirected appropriately. Hotspot/UAM Authentication Port: Default: 8000. Type in a different port number, or use the slider to change the port.

175. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 172 7.7.6 Page 6: Tunnel Summary The final page of the tunnel configuration interface is a summary of the tunnel specifications . This is especially helpful for matching this information with the router (or similar device) at the other end of the tunnel. • Tunnel Name • Mode • Initiation Mode • Pre - shared Key • Local Network • Remote Gateway • Remote Network • IKE Phase 1: o Exchange Mode o Key Life time (Secs ) o Encryption o Hash o DH Groups • IKE Phase 2: o PFS o Key Lifetime (Secs ) o Encryption o Hash o DH Groups • DPD Click Yes at the bottom of the Tunnel Summary page to save your configuration changes. This will cause active tunnels to restart.

221. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 218 • 1200 • 1800 • 2400 • 4800 • 9600 • 19200 Byte Size: The number of bits in a byte. Select from: 5, 6, 7, and 8. Parity: Change this value to enable parity bit checking. Select from the following dropdown options: • None: No parity checking. (Default) • Even: parity bit will always be even. • Odd: parity bit will always be odd. • Mark: parity bit will always be odd and always 1. • Space: parity bit will always be even and always 0. Stop Bits: Number of bits to initiate the st op period. Select from these dropdown values: 1, 1.5, and 2. Hardware (RTS/CTS): Use RTS (Request To Send)/CTS (Clear To Send) to enable flow control. Software (XON/XOFF): Use XON/XOFF to enable flow control. Linefeed : Select how you want linefeeds transla ted (CR = carriage return and LF = line feed). • Ignore • CR/LF • CR • LF

208. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 205 8.2 Device Alerts The Device Alerts submenu choice allows you to receive email notifications of specific system events. YOU MUST ENABLE AN SM TP EMAIL SERVER TO RECEIVE ALERTS. Alerts can be included for the following: • Firmware Upgrade Available: A firmware update is available for this device. • System Reboot Occurred : This router has rebooted. This depends on NTP being enabled and available to report the correct time. • Unrecognized MAC Address: Used with the MAC monitoring lists. An alert is sent when a new unrecognized MAC address is connected to the router. • WAN Device Status Change: An attached WAN device has changed status. The possible statuses are plugged, unplugged, connected, and disconnected. • Configuration Change: A change to the router configuration. • Login Failure: A failed login attempt has been detected. • VPN Tunnel Goes Down: Sends an alert when a VPN tunnel goes down. • Full System Log: The system log has filled. This alert contains the contents of the system log. • Recurring System Log: The system log is sent periodically. This alert contains all of the system e vents since the last recurring alert. It can be scheduled for daily, weekly and monthly reports ( Frequency ) . You also choose the Time you want the Alert sent.

172. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 169 • Encryption : Used to encrypt messag es sent and received by IPs ec. o AES 128 o AES 256 o Blowfish o Cast128 o DES o 3DES • Hash : Used to compare, authenticate, and validate that data across the VPN arrives in its intended form and to derive keys used by IPs ec. o MD5 o SHA1 o SHA2 256 o SHA2 384 o SHA2 512 • DH Groups : The DH (Diffie - Hellman) Group is a property of IKE and is used to determine the length of prime numbers associated with key generation. The strength of the key generated is partially determined by the strength of the DH Group. Group 5, for instance, has greater strength than Group 2. o DH group 1: 768 - bit key. o DH group 2: 1024 - bit key . o DH group 5: 1536 - bit key . In Phase 1 , only one DH group can be selected while using A ggressive exchange mode. By default, all the algorithms (encryption, hash, and DH groups) supported by the IBR600/IBR650 ar e checked, which means they are allowed for any given exchange. Deselect these options to l imit which algorithms will be accepted. Be sure to check that the router (or similar device) at the other end of the tunnel has matching algorithms. T he algorithms are listed in order by priority. You can reorder this priority list by clicking and dragging algorithms up or down. Any selected algorithm may be used for IKE exchange, but the algorithms on the top of the list are more likely to be used mor e often.

116. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 113 6.8.4 WiFi Settings (Advanced) When you select the Wireless (WiFi) Networks Settings tab in the Local Network Interfaces section, you have several additional options for configuring your wireless LANs under the WiFi Settings heading. Channel Selection Method : This controls how a WiFi channel is selected. • User Selection. Manually set the channel. • Random Selection. The router randomly sets the channel. • Smart Selection (Default). Scans to determine the lowest interference WiFi channel. Channel: (Shows if User Selection is selected.) The WiFi channel corresponds to a frequency the router uses to c ommunicate with other devices. The range is 1 to 11, and 1, 6, and 11 do not overlap each other. Select a channel from the dropdown list: • 1 (2412 MH z) • 2 (2417 MH z) • 3 (2422 MH z) • 4 (2427 MH z) • 5 (2432 MH z) • 6 ( 2437 MH z) • 7 (2 442 MH z) • 8 (2447 MH z) • 9 (2452 MH z) • 10 (2457 M H z) • 11 (2462 MH z)

179. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 176 7.8.1 WiFi Bridge When in WiFi Bridge mode with a configured profile, a WiFi Bridge device will be added to the local network interfaces, providing a way to bridge two LANs over a WiFi connection. For example, two separate Cradlepoint routers linked through WiFi Bridge mode allows you to have one WiFi - connected network in two separated sections of a large office building. This eliminates the need for extensive Ethernet cords to link the two routers, while allowing the full functionality of havin g one network. A router that is using Bridge mode passes network information through from the partner access point, so typically DHCP and NAT should be disabled. The router will connect to the remote WiFi access point and enable the bridging of two LAN networks together over WiFi. Under Network Settings → WiFi / Local Networks, choose the Local IP Network you want to attach this LAN interface to. Edit that Network, and under the "Interfaces" tab you will be able to see your WiFi Bridge profiles as "Available" interfaces. NOTE: The LAN IP address of this r outer and the attached WiFi access point cannot be the same address. To set up WiFi Bridge, follow these steps: 1) In Internet → WiFi as WAN / Bridge un der WiFi Client Mode , click on “WiFi Bridge” to enable this mode. 2) Your bridge network must be enabled under Saved Profiles . Either import the desired network from Site Survey or click Add to configure it. 3) Once WiFi Bridge is enabled and a bridge network is configured in Saved Profiles , go to Network Settings → WiFi / Local Networks and select a network from the Local IP Networks list. Click on Edit to open the Local Network Editor and find the Interfaces tab. Your configured bridge network should be listed in the “Available” section. Add this interface to your chosen network. 4) You need to turn off the DHCP Server . If you click Submit after attaching the WiFi bridge interface, a window will pop up asking you if you want to turn off the DHCP Server. You can also do this manually: click on the DHCP Server tab while still under Network Settings → WiFi / Local Networks in the Local Network Editor . Deselect “DCHP Server” to disable it. 5) Optional: Also under Network Settings → WiFi / Local Networks in the Local Network Editor , click on the IP Settings tab. Change the Routing Mode to “Disabled.” Changing the routing mode m ay improve security. You may also need to change the IP address to prevent IP conflict. Click Submit to save your configuration.

164. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 161 7.6 NHRP Configuration Next Hop Resolution Protocol is a protocol used to discover addresses of clients on Non - Broadcast Multiple Access (NBMA) networks. It is used to create next - generation VPN technologies that allo w shortcutting between spokes. With NHRP, systems attached to an NBMA network dynamically learn the NBMA address of the other systems that are part of that network, allowing these systems to directly communicate without requiring an intermediate hop. The N HRP Configuration table displays the following fields for each configured NHRP interface. • Name : Name of the GRE tunnel that NHRP will use. • Protocol Address/Prefix : GRE tunnel endpoint mapping that NHRP associates with the NBMA server. • NBMA Address : NBMA server address the protocol address/prefix is associated with. • Flags : o SD : Shortcut - Destination o N : Non - Caching o S : Shortcut o R : Redirect Click Add to create a new NHRP interface. • Enabled : Enabled or disable the interface. • Name : Give the interface a unique name that matches the mGRE (multipoint GRE) tunnel. Select from configured GRE tunnels or input manually. • Peer Authentication : Embeds the secret plaintext password to outgoing NHRP packets. Incoming NHRP packets on this interface are discarded unless this password is present. Max length: 8 characters.

185. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 182 • Any • ICMP • TCP • UDP • GRE • ESP • SCTP Source IP Address , Source Netmask , Destination IP Address , and Destination Netmask: Specify an IP address or range of IP addresses by combining an IP address with a netmask for either “source” or “destination” (or both). Source vs. destination is defined by traffic flow. Leave these blank to include all IP addresses (such as if your rule is defined by a particular port instead). E XAMPLE: If you want to associate this rule with your guest LAN, you could input the IP address and netmas k for the guest LAN here (leaving the last slot “0” to allow for any user attached to the guest network): • Source IP Address: 192.168.10.0 • Source Netmask: 255.255.255.0 Failover: (Default: Selected.) When this is selected and traffic from the chosen WAN de vice for this rule is interrupted, the router will fail over to another available WAN device. Deselect this option to restrict this traffic to only the selected WAN interface. WAN Binding Type: You have several options for specifying the type of WAN interf ace(s) you want associated with your rule. Designate the interface(s) by Port , Manufacturer , Model , Type , Serial Number , MAC Address , or Unique ID . This

195. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 192 8.1.5 GPS If you have an attached device with GPS support, you can enable a graphical view of your router’s location which will appear in Status → GPS . Use rs can configure GPS NMEA GGA format sentence reporting, available through a router - based server and/or a remote server. NOTE: Some carriers disable GPS support in otherwise supported modems. If you encounter issues with obtaining a fix, contact your carri er and ensure that GPS is supported. • Enable GPS support: Enables support for querying GPS information from supported modems. • Keep GPS Active : Keep the GPS receiver active at all times, even if no destination exists for position messages. This will place additional load on the router similar to sending reports to a remote server, but without consuming the network bandwidth. • Include System ID: Include the router ’ s "System ID" sentence with every NMEA message. This can be useful when a single remote client o r server is handling NMEA position reports from multiple routers. • Report NMEA GGA sentences: Report GPS fix using NMEA GGA sentence format (if available) . • Report NMEA RMC sentences: Report GPS fix using NMEA RMC sentence format (if available) . • Report NMEA VTG sentences: Report GPS fix using NMEA VTG sentence format (if available) . • Report Interval: Set the interval in seconds between periodic NMEA sentence reports. Use as long an interval as is practical for your application. The shorter the interval the mor e router resources and bandwidth will be used by the GPS subsystem. Too frequent reports may cause performance and/or availability issues. • Enable GPS server on WAN: Enables a server on the WAN side of the firewall which will periodically send GPS NMEA sent ences to TCP connected clients. It also responds to incoming UDP datagrams.

40. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 37 5.1 Client List The Client List displays the specifications of each de vice connected to your router, including Wireless and Wired clients. Wireless Clients . For each device using a wireless connection to your IBR600 , the following information is displayed: Hostname , IP , MAC , Connection , and Time Online . Wired Clients . For each device using a wired connection to your router , the following information is displayed: Hostname , IP , and MAC . Hostname: The name by which each computer o r device in a network is known. IP: The “IP address,” or “ Internet Protocol address,” speci fies a location for each device. MAC : This is the " MAC address", a factory - assigned identifier used to identify a specific attached computer or device. Connection : Summary of the wireless connection. For example: 802.11n, 20 MH z, 130 Mbps, - 26 dBm • 802.11n : The transmission stan dard being used by the client. Possible v alues include 802.11a, 802.11b, 802.11g, and 802.11n. 802.11n is the newest and best standard, but some older devices may not support it. • 20 M H z : This is the channel width that defines the theoretical data rate (in megahertz ) that the attached computer or device can send to or receive from the router. The channel width is set in Network Settings → WiFi / Local Network s . Typically this will be 20 MHz, but 40 MHz is possible if the router is s et to use two adjacent 20 MHz channels. A wider channel can mean better performance, but not if there is too much interference. Even if you set the channel width to 40 MHz, the router may still fall back to 20 MHz if it encounters too much interference. • 13 0 Mbps : The transmit rate (in megabits per second ) currently used to transmit packets from the router to the client. This rate changes automatically to match environmental conditions. Distance from the router, interference, etc can impact this value. Highe r values indicate better performance. Devices can still function in the network with as little as 1 Mbps.

243. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 240 10.2 Specifications MODEL NAME Cradlepoint COR Integrated Broadband Router IBR600 or IBR650 DATA IN Embedded modem (LTE/EVDO, EVDO, HSPA+, LTE/HSPA+, WiMAX) , 10/100 Ethernet Port, WiFi (IBR600 only) DATA OUT WiFi (802.11 b/g/n) – (IBR600 Only) , Two 10/100 Ethernet Ports (WAN/LAN Switch able) ANTENNAS 2 ex ternal 2.4 GHz Wi Fi antennas ; 2 external modem antennas BUTTONS / SWITCHES Power Switch , Reset LED INDICATORS Power, WiFi , Modem , Signal Strength, Ethernet LAN, Ethernet WAN DIMENSIONS 3.3 - in x 4 - in x 0.9 - in (85mm x 102mm x 22mm) WEIGHT: 7.2 oz (200g) CERTIFICATIONS: FCC, IC, CE, WiFi Alliance, PTCRB, plus c arrier specific certifications OPERATING TEMPERATURE - 2 0°C to 60°C (14°F to 140°F) Operating Modem as WAN - 2 0°C to 50°C (14°F to 122°F) Operating Ethernet as WAN - 20°C to 70°C ( - 4°F to 158°F) Storage DETAILS • WAN Security NAT, SPI, ALG, inbound filtering of IP Addresses (future), Port Blocking, Service Filtering (FTP, SMTP, HTTP, RPL, SNMP, DNS, ICMP, NNTP, POP3, SSH), Protocol filtering, WAN ping (allow/ignore) • Redundancy and Load Balancing Failover/Failback with 3G/4G/ Ethernet, Load Balancing, WAN Failure Detection via ping • Intelligent Routing UPnP, DMZ, Virtual Server/Port Forwarding, Routing Rules, Route Management, Content Filtering, Website Filtering, Local DHCP server, DHCP Client, DNS, DNS Proxy. ALGs: PPTP, L2TP, PPPoE pass - through, IPSec pass - through, FTP (passive), FTP (active), MAC Address Filtering, Dynamic DNS • Management Remote WAN Web - based Management Access (HTTP, HTTPS), Web - based GUI (Easy Manage ment), One - button firmware upgrade, USB firmware upgrade, Modem Configuration and Management, Server - based centralized Management (WiPipe™ Central), Modem configuration and management • Performance & Heath Monitoring WiPipe™ QoS, with Traffic Shaping, SSID - b ased priority, WAN port speed control • VPN (IPSec). Device to Cradlepoint , Cisco/Linksys, Linux system, Transfer Modes, Hash (MD5, SHA128, SHA256, SHA384, SHA512), Cipher (AES, 3DES, DES), Support for 5 concurrent connections, GRE Tunneling

148. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 145 7.1.9 CDMA Settings These settings are usually specific for your wireless carrier's private networks. You should not set these unless directed to by a carrier representative. If a field below is left blank, that particular setting will not be changed in the modem. You should only fill in fields that are required by your carrier. • Persist Settings: Persist advanced settings in the modem. If disabled, these settings will only take effect until the router is rebooted or the modem is re - plugged. • Active Profile: Select a number from 0 - 5 from the dropdown list. This selects a Profile to apply the following settings to. You need to get the correct profile index from your carrier and set it here. • NAI (Username@realm): Network Access Identifier. NAI is a standard system of identifying users who attempt to connect t o a network. • AAA Shared Secret (Password): “ Authentication, Authorization, and Accounting” password. • Verify AAA Shared Secret: A password. • HA Shared Secret : “Home Agent” shared secret. A password. • Primary HA: A "Home Agent", which looks like an IP address or broadcast address. • Seconda ry HA: Secondary "Home Agent". • AAA SPI: An Authentication, Authorization, and Accounting "Security Parameters Index". Usually a short numeric string. • HA SPI: A Home Agent "Security Parameters Index". Usually a short numeric str ing.

27. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 24 You may have changed the administrator password during initial setup using the First Time Setu p Wizar d . Log in using your personalized administrator password. If you have forgotten your personalized passwor d, you can reset the router to factory defaults. When you reset the router, t he administrator password will revert back to the Default Password . Press and hold the reset button on the router unit until the lights flash (Approximately 10 - 15 seconds). You can then log in using the Default Password (found on the bottom of your router) . 4.1.1 Router Details The Administrator Login page includes a quick - reference section that shows the following information: Router Details • Model Number: IBR600 /IBR650 • Internet Connection : Connected/Disconnected Wireless Details (IBR600) • Status: Enabled/Disabled • Clients: The number of attached users. • Channel: The channel number. • Name : The name of the primary network. If you hav e more than one wireless network enabled, the additional network names will also be listed here. Modem Details • Manufacturer: The name of the modem manufacturer ( Cradlepoint ). • Model: The name of the modem model (Internal LTE, for example) . • Signal: The stren gth of the signal (dBm). • Mode: (LTE, EVDO, HSPA, etc.)

44. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 41 Local Network s : “ Detailed Info ” links to Network Settings → WiFi / Local Network s . • Clients: The n umber of current clients. For each network, the following information is displayed: • Network Name: IP Address/N etmask o IPv6 Address: Shows the address if IPv6 is enabled. o Route Mode: NAT (Network Address Translation), Standard (NAT - less), Hotspot, or Disabled. o Access: Admin Access, LAN Isolation, UPnP (Un iversal Plug and Play) , and/or DHCP. To configure a network , see Network Settings → WiFi / Local Network s . WiFi Network s : “ Detailed Info ” links to Network Settings → WiFi / Local Network s . • WiFi Radio: Channel: 1 - 11 . Transmit Power (Expressed as a percentage). • Channel Contention: Displayed as a bar graph by percentage . Lower numbers are better; lower numbers mean that there are few competing signals. For each WiFi network, the following information is displayed: • SSID : Service Set Id entifier — an identifier or name for a wireless network.

112. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 109 Security Mode: You have severa l options for selecting a security mode. The mode you choose depends on the security features your wireless adapters support. • WPA2 Personal • WPA / WPA2 Personal • WPA Personal • WPA2 Enterprise • WPA / WPA2 Enterprise • WPA Enterprise • WEP Auto • Open Select “Open” to create a hotspot: otherwise select the best security that your devices will support ( Cradlepoint recommends WPA2 ). Depending on which Security Mode you select, there are different setup options. • “ Personal ” security modes require passwords and a “Re - key Interval” (default: 3600 seconds). • “ Enterprise ” security modes are linked to a RADIUS server and require RADIUS authentication: IP , Port , and Shared Key . • “ WPA2 ” (Personal or Enterprise) forces AES as the WPA Cipher. • “ WPA/WPA2 ” and “ WPA ” (Personal or Enterprise) allow AES, TKIP/AES, and TKIP. • “ WEP Auto ” requires a WEP Key. • “ Open ” has no password or other security measures. NOTE : If you don’t know whether you should choose Personal or Enterprise, assume Personal since you need to know RADIUS authent ication for Enterprise. In order to protect your network from hackers and unauthorized users, Cradlepoint highly recommends WPA2/AES for security if your attached devices can support it. WEP and WPA/TKIP are obsolete and have been replaced by WPA/AES. Usin g those security settings will cause the WiFi to limit to 802.11g modes. NOTE: If you select one of the security modes and are unable to connect to the router afterwards, you can use the reset butto ns to reset the router to its factory default state and tr y a different security mode instead.

81. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 78 • Port Negation: Match on any port that is NOT in the specified port range. • Port (s): Use for a single port or a range of ports. Fill in the left side for a single port. Us e Network IP , Netmask , and Port (s) to specify the ports and addresses for which the rule applies. You can specify a range of ports or a single port. Similarly, the netmask can be used to define either a range of addresses ( e.g . 255.255.255.0) or a single a ddress (255.255.255.255). If you leave these values blank, then all IP addresses and ports will be included. IP Source and IP Destination options can be used to differentiate between the directions that packets go. You could permit packets to come from par ticular IP addresses but then not allow packets to return to those addresses. Example of an IP Filter Rule: Suppose you have opened a port in your firewall in order to run a server. Someone, Johnny, is abusing that opening, so you would like to restrict his access. Create a rule that will deny Johnny’s IP address. Add IP Filter Rule • Name: No more Johnny • Enabled: Selected • Action: Deny • Protocol: Any IP Source • Network IP : 172.22.24.160 (Johnny’s IP address) • Netm ask: 255.255.255.255 (This net mask restricts the rule to one single address). • Port (s) : 80

133. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 130 7.1.5 IPv6 Settings The IPv6 ( http://en.wikipedia.org/wiki/IPv6 ) configuration allows you to ena ble and configure IPv6 for a WAN device. These settings should be configured in combination with the IPv6 LAN settings ( go to Network Settings → WiFi / Local Networks , select the LAN under Local IP Networks , and click Edit ) t o achieve the desired result. This is a dual - stacked implementation of IPv6, so IPv6 and IPv4 are used alongside each other. If you enable IPv6, the router will not allow co nnections via IPv4. When IPv6 is enabled, some router features are no longer supported. These are: • RADIUS/TACACS+ accounting for wireless clients and admin/CLI login • IP Passthrough (not needed with IPv6) • NAT (not needed with IPv6) • Bounce pages • UPnP • Network Mobility • DHCP Relay • VRRP, GRE, GRE over IPSec, OSPF, NHRP • Syslog • SNMP over the WAN (LAN works) There are two main types of IPv6 WAN connectivity: native ( Auto and Static ) and tunneling over IPv4 ( 6to4 , 6in4 , and 6rd ). • Native – ( Auto and Static ) The upstream ISP routes IPv6 packets directly. • IPv6 tunneling – ( 6to4 , 6in4 , and 6rd ) E ach IPv6 packet is encapsulated by the router in an IPv4 packet and routed over an IPv4 route to a tunnel endpoint that decapsulates it and routes the IPv6 packet natively. The reply is encapsulated by the tunnel endpoint in an IPv4 packet and routed back over an IPv4 route. Some tunnel modes do not require upstream ISPs to route or even be aware of IPv6 traffic at all. Some modes are utilized by upstream ISPs to simplify th e configuration and rollout of IPv6.

218. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 215 8.6.2 RADIUS/UAM Settings This section allows you to configure a RADIUS and Universal Access Method server. After the user accepts the terms, you can either let him/her continue to the URL they were trying to reach or you can force the user to go to a specified UAM Server or URL once before continuing on. RADIUS settings : • Server Address 1: Assigned by RADIUS service. • Server Address 2: This is an optional backup server. • Authentication Port: The standard port number, 1812, will usually be sufficient. • Accounting Port : The standard port number, 1813, will usually be sufficient. • Shared Secret : Assigned by RADIUS service. • Redirection On Successful Authe ntication : Choose from the dropdown list of options for redirection: o Redirect to the UAM Server . o Redirect to the URL that the user intends to visit. o Redirect to the following URL ( input the desired URL). • Session Timeout: (Default: 60 minutes.) The amount of time the user may use the router before being forced to authenticate again. This value can be overwritten by the RADIUS server. • Idle Timeout: (Default: 15 minutes.) If the user is idle for this amount of time, make the m re - authenticate. • Bandwidth (upload): (Default: 512 Kbits/sec.) The data rate limit for users uploading data through the hotspot. • Bandwidth (download): (Default: 1024 Kbits/sec.) The data rate limit for users downloading data through the hotspot. •

152. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 149 WAN Configuration Rule This section allows you to create simple or complex rules that affect how individual Internet sou rces or classes of sources (perhaps all WiMAX modems or all modems from Sierra Wireless) behave in the router. After clicking “Add” or “Edit,” you will see a popup with the following tabs: • Filter Criteria • General Settings • Ethernet Settings • Modem Settings • W iMAX Settings • CDMA Settings • SIM/APN Settings Filter Criteria . Begin by setting the Filter Criteria if you are creating a new rule. Create a name for your rule and the condition for which the rule applies: Rule Name: Create a name meaningful to you. This na me is optional. Select each of the following to create a condition for your rule. When: • Port : Internal USB Port or External USB Port. • Manufacturer: Select by the manufacturer , such as Sierra Wireless. • Model : Set your rule according to the specific model of modem. • Type ( Ethernet, LTE, Modem, WiMAX, Wireless as WAN, HSPA): Select by type of Internet source. • Serial Number : Select 3G or LTE modem by Serial Number. • MAC Address : Select WiMAX modem by MAC Address. • Unique ID : Select by ID . This is generated by the router and displayed when the device is connected to the router.

96. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 93 6.8.1 L ocal IP Networks Local IP Networks displays the following information for each network: • Network Name and IP address/Netmask (along the top bar) • Enabled (Yes/No) • Multicast Proxy (Enabled/Disabled) • DHCP Server (Enabled/Disabled) • Schedule (Enabled/Disabled – See the Schedule tab in the Local Network Editor) • VRRP Failover State (Disabled, Backup, or Master ) • IPv4 Routing Mode (NAT, Standard, IP Passthrough, Hotspot, Disabled) • IPv6 Add ressing Mode (SLAAC Only, SLAAC with DHCP, Disable SLAAC and DHCP) • Access Control (Admin Access, UPnP Gateway, LAN Isolation) • Attached Interfaces (Ethernet ports, WiFi, VLAN) Click Add to configure a new network , or select a n existing network and click Edit to view configuration options . HotSpot (Captive Portal) When you set a network as a “Hotspot” under Routing Mode , you will also need to : 1) Configure hotspot settings under System Settings → Hotspot Services . This is where you can configure a “Terms o f Service” agreement or select a website for redirection, for example. Click on Configure to link to the Hotspot Services page . 2) If you want a hotspot that includes WiFi , first set one of your WiFi interfaces to “Open” for its Security Mode and attach this int erface to your hotspot network. Otherwise guests will need to know the password to connect to the WiFi network even before v iewing a Terms of Service page (or other hotspot options). Finally , make sure your WiFi interface is “Enabled”.

144. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 141 Automatically check for new firmware : (Default: selected) The modem will automatically check for firmware updates by default. Modem Connection Mode: Specify how the modem should connect to the network. Not all options are available for all modems; t his will default to Auto if an incompatible mode is selected. • Auto (all modes): Let the modem decide which network to use. • Auto 3G (3 G or less): Let the modem decide which 2G or 3G network to use. Do not attempt to connect to LTE. • Force LTE: Connect to LTE only and do not attempt to connect to 3G or WiMAX. • Force 3G (EVDO, UMTS, HSPA): Connect to 3G network only. • Force 2G (1xRTT, EDGE, G PRS): Connect to 2G network only. See the following tables for a breakdown of the technologies used with various Cradlepoint COR models when any Modem Connection Mode is selected. CDMA Technology Auto Auto 3G Force 4G Force 3G (module auto selects) Force 2G (<= 3G) LTE 1xEVDOAe (EHRPD) 1xEVDO - A (HRPD) (3G) 1xEVDO - 0 (HRPD) (3G) 1xRTT (2.5G) IBR6x0LE (Sierra Wireless MC7750) ✔ ✔ ✔ ✔ ✔ ✔ ✔ IBR6x0E (Sierra Wireless MC 5728 v ) ✔ ---- ---- ---- ---- ---- ----

168. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 165 Pre - shared Key : Create a password or key. The routers on both sides of the tunnel must use this same key . Mode : Tunnel or Transport . Tunnel Mode is used for protecting traffic between different networks, when traffic must pass through an intermediate, untrusted network. Transport Mode is used for end - to - end communications (for example, for communications between a client and a server). Initiation Mode : “ Always On ” or “ On Demand . ” “ Always On ” is used if you want the tunnel to initiate the tunnel connection whenever the WAN becomes avail able. On Demand is used if you want the tunnel to initiate a connection if and only if there is data traffic bound for the remote side of the tunnel. Tunnel Enabled : Enabled or Disabled. MBR1200 Quick Connect : VPN tunnels in the IBR600/IBR650 have more cho ices than they do in the MBR1200, so it is more complex to configure. Check this box to simplify setup by streamlining your options. WAN Binding : WAN Binding is an advanced optional parameter used to configure a VPN tunnel to ONLY operate when the specifie d WAN device(s) are available and connected. An example use case is a router with both a primary and backup WAN connection and the VPN tunnel should only be used when the system has failed over to the backup connection. This use case makes the most sense w hen the primary and backup connection s are mutually exclusive, i . e., not connected at the same time. You have several options for specifying the type of WAN interface(s) you want associated with VPN Tunnels. Designate the interface(s) by Port , Manufacturer , Model , Type , Serial Number , MAC Address , or Unique ID . This selection will create a dropdown list of options to complete a sentence with the following form: “When ____ is ____ ,” such as, “When TYPE is LTE .” You also have the option to replace “is” with “isn’t,” “starts with,” “ends with,” or “contains.” • Port: Select from the dropdown list of possible WAN ports on the router. o WAN Ethernet o LAN Ethernet 1 o undefined • Manufacturer: Select from a dropdown list of attached devices. • Model: Select from a dropdown list of attached devices. • Type: Select from the dropdown list of possible WAN types. o WiMAX o Modem

186. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 183 selection will create a dropdown list of options to complete a sentence with the following form: “When ____ is ____ ,” such as, “When Type is LTE .” You also have the option to replace “is” with “isn’t,” “starts with,” “ends with,” or “contains.” • Port: Select from the dropdown list of possible WAN ports on the router. o WAN Ethernet o LAN Ethernet o Undefined • Manuf acturer: Select from a dropdown list of attached devices. • Model: Select from a dropdown list of attached devices. • Type: Select from the dropdown list of possible WAN types. o WiMAX o Modem o LTE o Ethernet o Wireless As WAN • Serial Number : Select from a dropdown list of attached devices. • MAC Address : Select from a dropdown list of attached devices. • Unique ID : Select from a dropdown list of attached devices. Load Balance Algorithm: Select the Load Balance Algorithm for this WAN Affinity rule from the following dropdown options: Select the Load Balance Algorithm for this WAN Affinity rule from the following dropdown options: • Round - Robin: Evenly distribute each session to the available WAN connections. • Rate: Distribute load based on the current upload and download rates. A WAN device's upload and download bandwidth values can be set in Internet → Connection Manager . • Spillover: This was the default algorithm in older (version 3) firmware. Load is always given to devices with the most available bandwidth. The estimated bandwidth rate is based on a combination of the upload and download configuration values and the observed capabilities of the device. • Data Usage: This mode works in concert with the Data Usage fea ture ( Internet → Data Usage ). The router will make a best effort to keep data usage between interfaces at a similar percentage of the assigned data cap in the

55. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 52 5.6.4 Internal HSPA+ Diagnostics • Product Internal HSPA+ • Modem Firmware Version • DEFPDP • Model Internal LTE/EVDO • Manufacturer Cradlepoint Inc. • Carrier ID • Service Display HSPA • Signal Strength (dBm) • GSN • PIN Status • Connection Type General Information • Unique Identifier • Port int1 • Profile 1 • Profile 2 • Profile 3 broadband • Profile 4 • Profile 5 • Profile 6 • Model Internal HSPA+ • Type modem

197. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 194 8.1.6 NMEA GG A, RMC, and VTG sentences See http://aprs.gids.nl/nmea/ , http://www.gpsinformation.org/dale/nmea.htm#nmea , and/ or http://gpsd.berlios.de/NMEA.txt for more information a bout GPS NMEA reporting. GGA $GP GGA – Essential fix data including 3D location and accuracy information Example: $GPGGA , 1753405 , 4916.45 0 ,N,12311.12 7 ,W ,2 , 06 , 1.5, 117.3,M,− 26.574 , M, 6.0,0138 *47 1753405 Time of fix – 17:34:05 UTC 4916.45 0 ,N Latitude 4 9 deg. 16.45 0 min North 12311.12 7 ,W Longitude 123 deg. 11.12 7 min West 2 Fix quality: • 0 = fix not available • 1 = GPS fix • 2 = D ifferential GPS fix • 3 = PPS fix • 4 = Real Time Kinematic • 5 = Float RTK • 6 = estimated (dead reckoning) • 7 = Manual input mode • 8 = Simulation mode 06 Number of satellites being tracked 1.5 Horizontal dilution of precision (HDOP) – relative accuracy of horizontal position 117.3 12 ,M Altitude in meters above mean sea level − 26.574 ,M Geoidal separation: height of mean sea level above WGS - 84 earth ellipsoid (negative value means mean sea level is below ellipsoid) 6.0 Time in seconds since last update from differential reference stations 0138 Differential reference station ID number *47 C hecksum – used by program to check for transmission errors

51. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 48 5.6.2 LTE: Internal LTE/EVDO Diagnostics • Signal Error Rate • MN - HA SPI • Modem Firmware Version • Battery Status • CGSN • MN - HA SS • Network Address Identifier (NAI) • SINR • Service Display LTE • MN - AAA SS • Carrier Status • MN - AAA SPI • PIN Status • GSN • Home Address • Product Internal LTE/EVDO • Signal Strength (dBm) • DEFPDP • Model Internal LTE/EVDO • Manufacturer Cradlepoint Inc. • Rev Tun • Battery Level • Secondary Home Agent • Primary Home Agent

53. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 50 5.6.3 Internal LTE/HSPA+ Diagnostics • Signal Error Rate • Modem Firmware Version • Battery Status • CGSN • Service Display HSPA • Carrier Status • MDN • PIN Status • ESN/IMEI • Product Internal LTE/HSPA+ • Signal Strength(dBm) • Default Profile • Model Internal LTE/GSM • Manufacturer Cradlepoint Inc. • Battery Level General Information • Model Internal LTE/GSM • Unique Identifier • Port int1 • Profile 1: Broadband • Type lte IP Information • DNS Servers • IP Address • Gateway

43. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 40 Router Information : “ Detailed Info ” links to System Settings → Administration . • Product: IBR600 /IBR650 • Serial: The product serial number. • Firmware : Gives the number of the current firmware version. • Build Date : Year - month - day - hours - minutes - seconds for the most recent firmware upgrade. • MAC Address: The router’s unique identifier. • CPU Usage : Expressed as a percentage. • Up Time: Total time for current session. • Clock : Current local date and time. To check for Firmware upgrades, see System Settings → System Software . Internet : “ Detailed Info ” links to Internet → Connection Manager . • State: Connected/Disconnected • Signal Strength: Expressed as a percentage. (Signal Strength is not included if Ethernet is the WAN type .) • WAN Type: Ethernet, Modem, or WiFi as WAN . • Connection Type: Pos sibilities include: DHCP (for Ethernet), HSPA, LTE, WiMAX, etc. • Connected Time: The time the current Internet source (WAN) has been connected. • IP Address • Gateway • DNS Servers For configuration options, see Internet → Connection Manager . The IP address and gateway describe your active WAN source. For DNS server configuration options, see Network Settings → DNS .

57. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 54 5.6.5 EVDO Modem (embedded modem) Diagnostics • Signal Strength (dBm) • PRL Version • Service Display 1x EV - DO ,1X • Carrier Status UP or DOWN • Connection Type CDMA • Connection State (connected, idle, etc.) • Connection Uptime General Information • Product EVDO Modem • Protocol PPP • Unique Identifier • ESN/IMEI • Model MC 100E - VZ • Type modem • Port 1 • Manufacturer Cradlepoint Inc. IP Informatio n • Netmask • IP Address • Gateway Statistics • Outgoing Bits/Second • Incoming Bits/Second • Incoming Bytes • Outgoing Bytes

9. CRADLEPOINT COR | USER MANUAL Firmware ver. 4.4.0 © 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 6 1.3.3 Captive Portal (IBR600) The captive p ortal solution provided by Cradlepoint routers enables businesses to provide their customers with a public WiFi hotspot with access controls. The controls can be as simple as requiring acceptance of a t e rms of s ervice agreement, while a dvanced fea tures allow administrators to control and monitor usage, require login, direct users to specific web pages, provide revenue through service fees or paid advertising , and more. 1.3.4 Cradlepoint COR Models Cradlepoint COR models Modem Technology Carrier / Locati on Antenna Symbol IBR600 (WiFi) IBR650 (no WiFi) LE - VZ LTE/EVDO Verizon  1  LP - AT LTE/HSPA+ AT&T  1  LP LTE/HSPA+ Canada  1  2 LP2 - EU LTE/HSPA+ Europe  1  2 P 3 HSPA+ Generic   P - INTL HSPA+ International   P - AT 3 HSPA+ AT&T  2  W WiMAX CLEAR  E - VZ 3 EVDO Verizon   E - SP 3 EVDO Sprint   NM (n o modem ) - - -  1 - PWD version available (IBR600LE - VZ - PWD, IBR600LP - AT - PWD, IBR600LP2 - EU - PWD , IBR600LP - PWD 2 ) that comes with an active GPS con nection at 3.3 V and 100 mA max; IBR600LP2 - EU - PWD , IBR600LP - PWD 2 versions require MOQ 2 Requires minimum order quantity (MOQ) 3 End - of - Sale date for these models is 6/30/2015. For more information, see Cradlepoint’s Product End - of - Life policy .

Views

  • 3361 Total Views
  • 2778 Website Views
  • 583 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 3

  • 1 www.google.co.in
  • 2 www.google.ca
  • 1 www.google.com