PETL 7060 Quickstart Guide

Quickstart guide for PETL 7060 module

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

7. 3. Enter the password and click the “ Submit ” button to enter the configuration web page. (The factory default password: Admin ) 4. Control the I/O for simple test. In the I/O Setting page, check the “ bit0 ” checkbox for setting ON to DO0 and click “ Update Settings ” button. 1 2 3 7 PETL-7060 Quick Start Guide

5. Configuring Ethernet Settings 1. Run the eSearch Utility. The eSearch Utility is located at: CD:\Napdos\Software\eSearch\ ftp://ftp.icpdas.com/pub/cd/ 6000cd/napdos/software/eSearch/ 2. Click “ Search Servers ” button to search your PETL-7060. 3. Double-Click your PETL-7060 to configure the settings. 4. Contact your Network Administrator to get correct network configuration. Modify the netw ork settings and then click “ OK ” button. The PETL-7060 will restart it-self immediately. 1. Click “ Search Servers ” 2. Double-Click your PETL-7000 5 PETL-7060 Quick Start Guide

1. For PETL-7060 English/ November 2010/ Version 1.1 What’s in the shipping package? The package includes the following items: PETL-7060 Software CD Quick Start Guide ( This Document ) Preparations for devices 1. Power Supply: +12 ~ +48 V DC 2. Ethernet Hub or PoE Ethernet Switch. 3. Make sure your PC has workable network settings. 4. Disable or well configure your Windows firewall and Anti-Virus firewall first, else the “ Search Servers ” on page 5 may not work. (Please contact with your system Administrator) 1 PETL-7060 Quick Start Guide

8. In the Home page, check that the DO 0 and DI0 status should show current status are “ ON ”. 1 2 3 Related Information PETL-7060 Series Product Page: http://www.icpdas.com/products/I ndustrial/petl7k/petl-7060.htm PETL-7000 Series Documentations: CD:\Napdos\PETL7000\document\ http://ftp.icpdas.com.tw/pub/cd /6000cd/napdos/ptel7000/document/ PETL-7000 Series Firmware: CD:\ Napdos\PETL7000\firmware\ http://ftp.icpdas.com.tw/pub/cd /6000cd/napdos/petl7000/firmware/ NS-205, NS-205PES Product Page (optional): http://www.icpdas.com/products /Switch/industrial/ns-205.htm http://www.icpdas.com/products/S witch/industrial/ns-205pse.htm ICP DAS Web Site: http://www.icpdas.com Contact Us (E-Mail): service@icpda s.com , service.icpdas@gmail.com Copyright @ 2010 by ICP DAS Co., Ltd. All Rights Reserved. 8

4. 2. Connect both the PETL-7060 and PC to the same sub network or the same Ethernet Switch. The function of the Ethernet LED on PETL- 7000 RJ-45 is reserved (Function: N/A). 3. Apply power to the PETL-7060. The valid power voltage range is from +12 to +48 V DC. 4. Wire the DI and DO for self test. The wiring as follows: 1. Connect the RL0 COM and IN0 . ( Pin13 connect to Pin06 ) 2. Supply the External Power +10V to RL0 NO . ( External +10V connect to Pin12 ) 3. Supply the External Power GND to IN.COM . ( External GND connect to Pin07 ) 4 PETL-7060 Quick Start Guide

3. DI/DO Modbus Address (1xxxx) DI address: Begin address Points Description Bits per Point Range Access Type 0 (0x0) 1~6 Digital Input 1 0:Off 1:On R 32 (0x20) 1~6 Digital latched status (high) 1 0:no 1:latched R 64 (0x40) 1~6 Digital latched status (low) 1 0:no 1:latched R (0xxxx) DO address: Begin address Points Description Bits per Point Range Access Type 0 (0x0) 1~6 Digital Output 1 0: Off 1:On R/W 32 (0x20) 1 Clear all DI latched status (high) 1 1: Clear W 33 (0x21) 1 Clear all DI latched status (low) 1 1: Clear W . . . . . . . . . . . . 235 (0xEB) 1~6 Power-on value for DO 1 0=Off 1=On R/W/F 267 (0x10B) 1~6 safe value for DO 1 0=Off 1=On R/W/F For detail “DI/DO Modbus Address” information, please refer to section 5.3 Modbus Register Address of user’s manual. CD:\NAPDOS\PETL7000\Document\ Connecting the Power and Host PC ftp://ftp.icpdas.com/pub/cd/ 6000cd/napdos/petl7000/document/ 1. Check Init/Normal switch is on Normal position. 3 PETL-7060 Quick Start Guide

6. Testing your PETL-7000 Notes: In order to avoid accessing error in “ IE ” browser, please disable your IE cache as following: Notes: In order to avoid accessing error in “ IE ” browser, please disable your IE cache as following: Step 1: Click “ Tools Step 1: Click “ Tools ” >> “ Internet Options... ” in the menu items. Step 2: Click the “ General ” tab and then click the “ Settings... ” button in Temporary Internet files frame. Step 3: Click the “ Every visit to the page ” and then click the “ OK ” button in Settings box and Internet Options box. For more detail, please refer to the user manual (Page 77) C:\ Napdos\PETL7000\Document\ http://ftp.icpdas.com/pub/cd/ 6000cd/napdos/petl7000/document/ 1. Wait 2 seconds and then click the “ Search Servers ” button again to ensure the PETL-7060 is working well with new configuration. 2. Click the “ Web ” button to link the PETL-7060 web server. 1. Click y our PETL-7000 on the list Click 2. Click 6 PETL-7060 Quick Start Guide

2. Pin Assignments and Wiring Note Pin Assignments Terminal No. Pin Assignment 23 RL5 COM 22 RL5 NO 21 RL4 COM 20 RL4 NO 19 RL3 COM 18 RL3 NO 17 RL2 COM 16 RL2 NO 15 RL1 COM 14 RL1 NO 13 RL0 COM 12 RL0 NO 11 N/A 10 N/A Terminal No. Pin Assignment E1 RJ-45 01 DI5 02 DI4 03 DI3 04 DI2 05 DI1 06 DI0 07 DI.COM 08 (R)+Vs 09 (B)GND Digital Input/Output Wiring 2 PETL-7060 Quick Start Guide

Views

  • 805 Total Views
  • 608 Website Views
  • 197 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 4 www.dcitech.com